th130 Posted June 25, 2009 Share Posted June 25, 2009 Hey Guys, does anyone know where in Wellington i can rims redrilled and a few little dings straighted out. Going from 100 pcd to 98 pcd and any help would be great. Have rung rimrite in palmy a couple times but seems answering phone is beyond them. Cheers Terry Quote Link to comment Share on other sites More sharing options...
Rusty Posted June 25, 2009 Share Posted June 25, 2009 dobt you have to have 3mm between holes to be legally allowed to use them? Quote Link to comment Share on other sites More sharing options...
eke_zetec_RWD Posted June 25, 2009 Share Posted June 25, 2009 do you want a whole new set drilled or old ones slotted? rim rite are a bit like that. if new holes i may be able to help.... Quote Link to comment Share on other sites More sharing options...
isnowi Posted June 25, 2009 Share Posted June 25, 2009 Howat engineering in Naenae can probably help, they are one of only a couple that are trusted by the local certifiers to widen steels etc, they do alloy wheels too. I had some steels widened there, came out pretty nice, reasonably priced too. Quote Link to comment Share on other sites More sharing options...
th130 Posted June 26, 2009 Author Share Posted June 26, 2009 Whoops didn't make it to clear did I. I understand you can get inserts pushed in that will change the pcd. So currently 100 pcd but drill/press out current inserts and get new inserts which are 98 pcd. So effectively offset 2mm from old insert center. Cheers for the help and i will go see the guys at Naenae. Do they also straighten rims? Quote Link to comment Share on other sites More sharing options...
eke_zetec_RWD Posted June 26, 2009 Share Posted June 26, 2009 if those locals cant help can do a perky for you. . . . . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.