Jump to content

escortwags's kiaora mai 1973 Mazda RE Capella - NOT FOR SALE


escortwags

Recommended Posts

well after being threatend to be cut if i didnt make a thread bout me ol girl ive decided to make one..pics will be slow as im sucha useless bastard at taking them let alone putting them on the net..

anyway heres some of when i got the ol girl

myweecapella2yi0.jpg

myweecapella3ph0.jpg

myweecapellaft0.jpg

she is a virgin to N.Z fresh from acrross the ditch have all paper work check sheets all that crap so she can and will be registered on our crappy bumpy roads

the bodys not to bad usual rust in a few places but ive seen worse

sporting a massive 1.6litre which actually didnt run that bad

and massive front callipers which the passenger side had decided to make brakes babies with the rotor and was siezed on like a bitch (was fun to drive like that)

Link to comment
Share on other sites

then after that before i forgot to take more pictures :doubt: i stripped the girls insides till she was but naked..and also at this stage i had purchased some brand spanker RS'5 mmm they were yum! just eyeing them up to see what they would look like (i eventually bolted them on that night just have to find pics)

god dam that thing looks jacked! :D

52070657gm7.jpg

69645864cf7.jpg

48315996jy9.jpg

68048165iq0.jpg

these pictures are from bout november last year this was when i was living in auckland and had to ditch the car in my old mans shed for a while (was inbetween a transfer to aucks)

Link to comment
Share on other sites

Next thing to tackle was the 4x4 stance that they seem to have

ended up getting bilstien adjustables on all 4 corners all custom made and to suit track use (spring rate, valving etc)

will get pictures of the faaaaarking extremely pricey bastards tonight when i go threw my pics :wink:

intheshediy4.jpg

my old mans big ass shed up north the car waiting for its suspension to arrive

THAT IS THE WORST CRYPTIC TYPING IVE EVER SEEN MYSELF DO!

: :lol::lol:

Link to comment
Share on other sites

meh one more pic today and im done

this is when she finally made it to her resting place at my house in aucks

parked it with my partners sweet little cortina (which just got a new wof again woohoo)

sussed a carbon fibre boot for her (the old boot was tired anyway)

and cut out the boot florr to make way for

drop tank

surge tank

battery

and methanol enrichement kit :twisted:

randompicsu4.jpg

bootxl2.jpg

more pics of all the goodies tomorow

Link to comment
Share on other sites

oooo bits and peices ive managed to haord over the last few months ready to go in

and a random pic of the mates r100 and hearse on baaaaags :D

mmmm shiney drop tank

droptankdq4.jpg

sust out some coils awhile ago along with a microtech

going to mount them in this weekend the only thing holding me back from most shit

is not being able to go to bolt man on the weekend :cry:

coilspi0.jpg

ooo some arrow 2 bukeez to put my booty in the fit nice on standard rails

no mods are needed (had them in and took them out as the floors just been painted

and getting ready for DYNAMAT next week) FANCY!

bukeezxj3.jpg

what do we have here? part of the methanol system which should be fun

and smell oooooooo so good!

methis7.jpg

mmm sexy cars!

thewharepi6.jpg

that'l do for the day dont wana blow my load to quick! :D

Link to comment
Share on other sites

ok ok should have posted this near the start

the motor out of a series 6 batty boy

motorhg2.jpg

the engine bay getting all fanced up and cleaned and de ugleyd

didnt get much pics of it

enginebaymo5.jpg

and what do you know after getting the front cover switcharood

and using my spare rx2 x-member the bastard fits snug as a bug!

engineinkb2.jpg

also note the nice shiney snout i got from oz :wink:

Link to comment
Share on other sites

alrite found some more pics

this is at the stage where i had made up all the intercooler piping all nice and snug

mounted up intercooler with some alloy (replacing with steel obviously)

and just about to mount rad (thats why the tapes there)

got a exhaust manifold of SDR in australia all niiiice

everything sitting pretty much where it should,

and whats this .... its a wee little turbo woohoo

going to get anything that isnt alloy powder coated satin balck for something a bit different

manifolds etc.

turbomq3.jpg

heres a pic from the front how everything looks looks dirty as shit

basically the plan is to put everything in how it should then rip it all out for panel and paint

that way im not f''kn around with mint panel engine bay etc trying to fit everything

its a Mr enforcer intercooler and yes it goes all the way up past the grill :evil:

the plot thickens...

frontpicfp9.jpg

just looked at that picture and it looks wierd

makes the front bumper look all mental at everything looks outa proportion :doubt:

oh well ill get some better ones when shes out the shed this weekend

note the awesome piece of wood in the top pic :lol: just waiting for bolts to smake the g-box on and that should be long gone..alot better then holding it in place with rope and shit though :wink:

Link to comment
Share on other sites

alritey then its more picture time

heres the boot with the panel steel but and box section all dummied about to be welded

little fuel tank is for the methanol

was a mission to make the template so it would but up, but managed to sus it after a few beers

bootcutre2.jpg

and heres the diff in (bolts finger tight) checking clearance issues which are close but non exsistant

so much bigger than the standard pussa plus have a nice tight lsd for here :D

diffan2.jpg

everything looks crap how its so dirty but that will all change after paint

and heres a but shot of the car.. the adjsutables are wound up so i can access underneath the boot easier etc..eats rim hard in the bum with them down but the front x-member gets a wee bit close to the ground (under 60mm)

BUT DONT WORRY IM NOT A STAIN IT WILL ONLY DRIVE ON ITS LOWEST SETTING :wink:

backshotofcarso4.jpg

thats enough pics for today will get some decent ones this weekend when i push it outa the shed..also notice the inside of the rim with the diff picture .. its polished to :D

Link to comment
Share on other sites

  • 1 month later...

BACK ON MUTHA F**KN TRACK!

Shits kinda sorted with all my shit so cars starting to get some more love

rolled her outa the shed for the first time IT MOVES!!!!

brakes all sused going to hopefully finish the interior this weekend, just waiting for dynamat to arrive

mybrmbrmcarsmalltg3.jpg

Link to comment
Share on other sites

  • 3 months later...

alright found some olish photos on my work computer from a few months back

where the green paint is, is where i decided to get angry with my mate the angle grinder

cutting out the crappy bent to shit top panel bit and a nice hole for the turbo to suck from :D

starting making the raditator ready to be bolted in FINALLY!!!!

mycar013.th.jpg

mycar007.th.jpg

Link to comment
Share on other sites

decided i hated old stupid rusty hex bolts,

went down to bolt man with my wallet and got $150 worth of black cap screws :D

got carried away with them as you can see and even done the headlights!

eventually everything will be a cap, most of the front end is now after that buying spree

mycar035.jpg

mycar032.jpg

Link to comment
Share on other sites

ooo thats rite, some of you may hate it but i dont!

got a really f**kn good deal on some dynamat and couldnt resist

I luck being comfortable in my old beauties!!!! + makes the whole car alot

tidyier and nicer to work on : :wink:

my engrish is pretty bad this afternoon

mounted my nice brand new seats in aswell,

no modifaction needed to original rail or the racepro one niiiiiiiiiice

only one shown in this pic

mycar020.jpg

mycar021.jpg

Link to comment
Share on other sites

forgot to mention in that post

if anyone decides to lay dynamate WEAR GLOVES

my hands got so fucking cut up by the sharp shit i was a mega emo

ive got dna covering most of the floor :lol::lol:

and heres what it looks like with a big arse hole cut out where there shouldnt be

will be nice for the little turbo once i get a filter on there

note all the crusty rust and crap on the front, prepd and painted it all up looks

alot nicer now, will put the pics up tomorow, have most of the interior finished aswell :D

mycar037.jpg

Link to comment
Share on other sites

and a random picture of the garage looking like a shit whole last month

car looks like a pile of crap that just sucks my money :evil:

mycar053.jpg

have sinse tidyed shed up

put new black door cards on and back seat

mounted oil cooler + radiator

painted up front black

mounted EWP

put gearbox together and put my trusty gearknob on

and shit loads more...

pics to follow

(get on page 2 you crappy thread!)

Link to comment
Share on other sites

decided last week to piss off the old bus steering wheel

turned into the biggest mission ever

bashed the shit out of it for about a week with no return

soaked it in all sorts of crap with nothing more than sweet fuk all happening

ended up taking the whole steering column out, put in a big vise, got a big punch,

and a big fark off axe and puned the shit out of it with a mate for 5mins till eventually

it slide off the steering wheel

it actually looked like the thing had self welded on the spline with 30 years of gunk hardning!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...