Dmitry

Is anyone, or does anyone know of a good automotive glazier in chch keen to do a cashy? I need 2x s110 windscreens removed one weekend, I'll sort the rust out another weekend and then one of the windscreens needs to go back in. So whos keen? Reply or PM or txt me. 027 349 4354. Cheers Dmitry

the only thing is the r34 brakes dont have the steps in the centre piece. is the handbreak setup a drum break?

ah right, yea i did have a thread on there but gave up lol. just starting to get motivated with it again. hopefully it keeps up

cheers guys, sorry cobranz i don't recognise your username?

Do you mean never work on a standard tune or never work at all? I was planning on doing a nistune daughterboard + tune. In regards to a Link, I cannot find another cheap g3 and dont want to use any of the previous models. megasquirt i'm a tad iffy about, had read into it a while ago and the general consensus i got was they didnt have much resolution in their maps.

thanks mate Are you referring to this one? http://www.datfusion.com/forums/index.php?showtopic=86 I have found that and it seems to be fairly straight forward. I have seen people say they got it running on sr20 ecus too and i would like to do the same for a couple of reasons: A) i have a loom and ecu already coilpacks for ca18dets are becoming harder to come by as most of them are old and worn down. however, thinking about it now, with the ca18 setup, since it has four injector/ignition drives, am i able to run "wasted spark" coils off the likes of holdens etc but use 4 coils to drive the twin sparks? Would be interesting.

cheers done, tbh i got no idea what the wheels actually are, the only set i have seen around with the exception of the pic you posted. anyone one here clued up about how to use a sr20de s13 ecu to run the z18? i know my way around electronics just am a little unsure as to how about actually getting it to work.

quick mock up of the interior. dont like the brown. thinking of a black re-trim? still need the rust cut out by the windscreen, as soon as thats done and i finish rewiring the whole car i can assemble the insides. things left before certman gets it: rear suspension, engine assembly/installation, intercooler and piping, get the last of the rust, sort some nice wheels out, make my s14 seats fit the s110 rail.

haha yea i've cut the new one's budget in half since so this one is getting a bit of love. still have rust to cut out, would otherwise have the interior done. and be waiting on the rear suspension, engine and wheels.

WARNING picture dump. Discuss: viewtopic.php?f=18&t=26996 Went halves with my brother on this: The day we got it. Was given the story that the previous owner tried putting 22psi through it on the standard turbo but the headgasket gave way. Unfortunately the last owner took the head off and kind of left it at that, so the block became rusted and useless. The majority of the car is rusted. The steering wheel spline was scraped off due to people using shit vicegrips for steering. All in all a good buy? Oh well, got a mate to do some magic on it: And of course installed that Nardi Style style steering wheel: Bought this: Donor car. Ripped a whole bunch of parts off and sold a few more. (if you want something off here let me know) Did a weekend's worth (literally the majority of the two days) of de-rusting with three of us working. Thought we were nearly done, got home at 1am on Monday and then a week later discovered theres more rust around the A-pillars so the windscreen has to come out to get at that. Next on the list after the exams. Decided that the engine should probably get a once-over. Fucking good condition inside, 150k kms. Project z18e+T. Fuck yea I love how the z18 pistons have 4 cut-outs for valves when the head only has 2 valves... Probably just how they cut compression down back in the day. Since putting most of the engine together, i took it back apart because i got some extra cash and decided to get the block decked, honed and acid dipped (puls to get an easy-out out which snapped pulling a snapped bolt out. ugh. am now in the process of putting it back together and i have half the head bolts missing. fffffuuuuuu. got s13 brakes, hubs, knuckles, lower control arms and coilovers fitted in the front the rear is a bit trickier and will be stealing this idea (off a ae86 off here) will talk to my certifier soon and see if he is happy with this. anyways, this is how it sits now: this is the reason why this project is going so slowly:

Project here: viewtopic.php?f=17&t=26997

I would be looking at the earth too

erm no idea what the hell that is but its definitely not not a silvia loom!

hey does anyone know the z18et injector size? I bought a s110 a while ago with a blown engine and only just started assembling it. but two of my injectors are a greeny colour and the other two are blue-ish. Was wondering if any other ones are a direct swap i.e rb20det ones or something. Cant find any info on the net. cheers