78rona

Haha yea man had some fun this weekend!! you should come take it for a blat sometime bring back some memories of your old one.

https://www.youtube.com/watch?v=uI-lyzV ... ata_player Hope this video works better. So car is now getting exhuast done in time for weekend cruising !

Thanks to Mr Dori it runs! http://www.youtube.com/watch?v=_oCNcVNBgFc ignore the funky powersteering noise haha no fluid will do that . So happy with it !

So flipping stoaked man!! Mr dori you are a legend!!

Wow man such a wickedly clean looking build !! Those carbs look awesome!

would anyone out there know where i can find wiring diagrams for gx61 with 1geu? haven't been able to find anything, trouble is I now have a 1ggte in it and I know what wires the new 1ggte loom wants but don't know where on the existing gx61 car side loom they are? cheers for any help!

So finally got the chance to do some proper work on it sorted intercooler out along with a whole lot of other things, this is what it looks like at the mo how I ended up bringing the piping out still a bit to do and sadly doesn't look like it will be done in time for the big JZX NZ meet still need to get intercooler and bonnet stay braced properly accelerator cable working wiring sorted exhaust from down pipe back and a couple of other minor things Don't think all that can happen before sunday ! But i'll try Can any one help with wiring? or recommend someone? Can't wait to finally bring this to an oldschool meet shouldn't be long now viewtopic.php?f=18&t=29815

Just wondering if anyone knows someone that could sort this for me , I've got a 1ggte from a gz20 soarer in my gx61 , Trying to sort the accelerator cable out, the bracket thing on the standard gx61 looks like this the gz20 soarer on is like this another photo I know autostop used to make cables just wondering if any one on here has a hook up? or has any ideas for swapping them over. cheers

Cheers man. Yea looks like ill trim it . Stink thing is it looks like ill have to pull the motor out again to do it. Was thinking about pulling the bottom half of the shield off but might as well keep as much of it there as possible.

So I picked up a 1ggte from a gz20 auto box and only done 90,000, been pretty busy today getting the 1ggte in , pulled auto box off put flywheel,clutch etc on , swapped from mid to front sump. So happy to have it in. But I have a problem !! turbo heat shield is hitting the steering box !! So crap annoying , anyone got past this problem before ? wondering if losing the heat shield will help? or will I have to change steering box? and after that ill have to sort the wiring . calling on anyone who has done a 1geu to 1ggte before any help with wiring would be awesome ! viewtopic.php?f=18&t=29815 If any one is after any 1geu stuff or a mid sump and oil pick up or a 1ggte auto box let me know .

So here's a video of the damage haha, tried to kill it off good and proper haha Which resulted in this Sadly it wont be the 1jzgte going in at this stage , but a 1ggte is on the cards sorting one to hopefully pick up this sunday , good upgrade for my money, and hey it's got to be better than a 1geu, Anyone done a 1ggte into a gx61 before ? any advise? Its a gen3 1ggte I know there is some wires car side of the loom that will need splicing , not sure which ones though , Will try get the accelerator cable from the donor car too , otherwise will have to get one made as standard one will be to short , any other things I should look out for? Let me know if you know who on oldschool I should talk to about doing this conversion viewtopic.php?f=18&t=29815

Oh yea that's a sweet price. Getting more and more keen.

Wish my wallet agreed haha. Pulling it apart tomorrow to inspect the damage. Do have my eye on a 1j ATM. Anyone know the best place price wise for w57 to 1j belhousing ?

Stink update !! Head gasket just gave up tonight , pretty gutted ,wondering if its worth fixing the 1G or if its trying to tell me 1J time.

Can be done, I picked up my ssr mk 3's for pretty much the same price I sold my konig b-bombs. Maybe I was lucky to get them for that cheap. The hardest thing was the wait from Japan

Photo dump of better pics pretty stoaked to finally get them on the car as you can tell by all the pictures haha viewtopic.php?f=18&t=29815

I used cobra MA61 supra springs front and rear cant remember if they were super low or just low but the were the lowest ones they made for Ma61 and ae92 front inserts with a little spacer under the insert to keep it all captive , used a holden commodore wagon strut for the rear too , all worked out pretty well rode really well too could have been a little lower in the front though

just a picture with the SSR's on finally , hmmm think it might need more slam, still need to figure out what to do coilover setup upfont , can lower the back a bit more easily enough . car looks better in person haha need some better pics

random question but is anyone heading from out west with a spare seat and maybe a little boot space haha , my car is off the road and this will be my first meet, need to give my coilovers to sheepers for welding too. If not ill bring the shitter out but worth a try, cheers guys maybe text me if you can help would be cool . 021 585 077

Low on funds right now sorry man thanks anyway , sorting the coilovers out and tyres and wof etc , once I have all this done id be keen , but if someone else wants it no worries dude

cheers anyway kyteler looks as though Zeb bet me to it haha, the nuts I have bought will work fine anyway .

boring update ,just a pic of all the wheels together getting closer to these getting on the car , got the wheel nuts today turns out Craiger make a perfect drop shank for them when you use a normal washer not the craiger style . New nuts and bolts for the face of the rims on there way ,then polish the lips up and paint the face and on they go.

they are 14x7.5 0 offest front and 14x8 -20 rears , so stoaked they are finally here! just need my coilovers welded up and Im away ,got wheel nuts today so getting closer to these being on the car haha

cheers man , that is a good idea ,I have got heaps of paint left over , might do one for now and see how it looks.

viewtopic.php?f=18&t=29815&p=725194#p725194