-
Posts
372 -
Joined
Posts posted by Dudley
-
-
55 minutes ago, dabuzz said:
Its quite hard to find JDM wheels in 4x110, there just isn't the selection, and becomes too hard navigating Japanese sites for the odd set that pops up, or totally changing PCD on either the rims or the car itself.
Yahoo is just as easy as trademe to use, if you want to find jap 4x110 wheels you can make it happen fairly easy.
i find it easiest to just search pcd110 on yahoo and all sorts of stuff pops up
- 1
-
7 hours ago, kpr said:
soon as you go cams, most cases its to much for the factory ecu to deal with. unless its an ecu that can be tuned. really need an aftermarket ecu and a good tune to get it all running nice.
So you’re saying once again carb is superior to fuel injection?
- 1
-
Technically I’m only a part time menace
- 2
-
On 13/03/2024 at 22:40, kpr said:
from memory it helps with rollsteer
Se7en @kpr
-
Fuck yeah
-
On the vacuum port just use your normal usb cord, or if you want more accurate results slip it down the barrel when a wide open
-
12 hours ago, kpr said:
I run the same setup, just link's version of it, on my itb turbo setup. has an afr lookup table to tell the fuel model how much extra fuel with the map. assume haltech does similar.
works on na stuff as well, but isnt the go to on more aggressive stuffI’ve heard mega squirt is the future of ecus?
- 2
-
I’m sorry but I thought this was oldschool.co.nz? Where we fuck with carbs and incorrectly jet them so they run rich asf 24/7?
- 1
- 2
-
Anyone have a recommendation on a well priced afr gauge ?
-
I only had to do 3 rounds of tape to make it fit in the gauge pod supplied with the gauge
- 2
-
Once again I would like to vouch for the absolute quality that is savage gauges
- 1
-
I’d recommend savage gauges if you want a accurate readout that doesn’t change colour at random times or stall and lag at all
- 1
-
Can confirm xcel arc welders fuckin hisssssssssss
- 1
-
I run them In 175 60 13 but you can also get them in 185 60 13
-
https://www.hyperdrive.co.nz/product/4407/yokohama-advan-a539?associated=9352
wait around and they normally o on sale for $125 ish
best 13” tyre size , look and performance
- 1
-
Toyota 4k 3/4 race cam coby headers and some gilliez that are pingin
- 3
-
And pictures of wiring plz
-
Still doesn’t run as good as my freshly diy tuned carbs
-
7 minutes ago, dabuzz said:
I dig most of that, but that wing- looks like a 5 year old stuck it on as an afterthought
You dig em mazda bt50 flares tek screwd on it haha
- 1
- 1
-
-
51 minutes ago, kp60nick said:
I have an og trd fiberglass roof wing from jp that I've had a mould made. Could potentially get one made if you are interested?
What sorta $$$
-
Aren’t 210cc injectors smaller than stock ones?
-
3 minutes ago, kpr said:
Back in the day.On an octane limited turbo 1500cc 95 was good for about 15psi boost. 98 20psi. Half avgas half 98 was good for 24psi. Around the 30kw mark for each jump. Pretty sure it was the full lead stuff not 100ll
Incorrect
- 1
-
1956 British Seagull - Hipster Motorboatin'
in Other Projects
Posted
I vote no boat hipster stuff till v8 corolla is driving