Jump to content

WankBankA100

Members
  • Posts

    204
  • Joined

  • Last visited

Posts posted by WankBankA100

  1. On 06/07/2020 at 12:46, MopedNZ said:

    Hi people. 

    I like tyres and can get all of them. 

    Whilst SR241's are a mad dog tyre (and can definitely fit a 1.4 wheel - main issue is fitment between forks and/or guards) There are other options available. Well there is one option. 

    You can get these:

    eyJidWNrZXQiOiJ3ZWItbmluamEtaW1hZ2VzIiwia2V5IjoiYXdhcmRcL2ltYWdlc1wvcHJvZGltZ1wvMTc0M18xLmpwZyIsImVkaXRzIjp7InJlc2l6ZSI6eyJ3aWR0aCI6NzAwLCJoZWlnaHQiOjcwMCwiZml0IjoiaW5zaWRlIiwid2l0aG91dEVubGFyZ2VtZW50Ijp0cnVlfX0sInZlcnNpb24iOiI5MzhhNGI1Mjk2MjdjNWRkMzAyNWFkZmE0OGQ0MDQ1YjljYzU0MjBhIn0=

    Available in 2.50/2.75/3.00x18. 
    Also available in 2.50/2.75/3.00x18

    Also soz. But the NZ supplier will only have a couple of SR241's till later this month because I just ordered most of them.

    TOP TIP: Use heavy duty 17" tubes for max non flat tyres. 

    Yo, did the SR241’s make it to NZ? The 18-2.75’s that is. Been keeping an eye out, and they’re just showing up as indent order everywhere...

  2. On 06/07/2020 at 12:46, MopedNZ said:

    Hi people. 

    I like tyres and can get all of them. 

    Whilst SR241's are a mad dog tyre (and can definitely fit a 1.4 wheel - main issue is fitment between forks and/or guards) There are other options available. Well there is one option. 

    You can get these:

    eyJidWNrZXQiOiJ3ZWItbmluamEtaW1hZ2VzIiwia2V5IjoiYXdhcmRcL2ltYWdlc1wvcHJvZGltZ1wvMTc0M18xLmpwZyIsImVkaXRzIjp7InJlc2l6ZSI6eyJ3aWR0aCI6NzAwLCJoZWlnaHQiOjcwMCwiZml0IjoiaW5zaWRlIiwid2l0aG91dEVubGFyZ2VtZW50Ijp0cnVlfX0sInZlcnNpb24iOiI5MzhhNGI1Mjk2MjdjNWRkMzAyNWFkZmE0OGQ0MDQ1YjljYzU0MjBhIn0=

    Available in 2.50/2.75/3.00x18. 
    Also available in 2.50/2.75/3.00x18

    Also soz. But the NZ supplier will only have a couple of SR241's till later this month because I just ordered most of them.

    TOP TIP: Use heavy duty 17" tubes for max non flat tyres. 

    Wait, have you pre-ordered the SR241's from the order that's coming in later this month?

    EDIT, i'm being a retard. You mean the current stock they have. Sweet. I'll fight you over the 18's!!

    • Thanks 1
  3. On 06/07/2020 at 10:29, anglia4 said:

    Anyone tried a Shinko SR241?

    They do one narrow enough to fit my 1.4 wide wheels, but not sure if I'll be able to find any in NZ

    I Run SR241's on my Suzuki A100 and they're gold. They won't always fit in your front fender though, as mine didn't. SO had to ditch the chrome special and replace with a UFO vintage dirt bike fender bolted to underside of the lower tripple clamp. Careful not running front fenders if your wiring loom hangs low, otherwise you'll do what I did and wear the insulators off the wires on the wiring loom when you bottom out the front, which you will on shitty old suspension.

    I can confirm that there will be more in at the end of the month. I'll be snapping up 2 of them myself. There were 2 indent orders last year, one for 5, and mine for 8. So clearly Whites realised people wanted them!

  4. Wear a motorcycle jacket and it's not suuuch a huge issue. I found that the heat issue was only a problem when you stopped, at which point you take the jacket off.

    I only wore t-shirts under my riding jacket last year, and if you get too hot, you can adjust the ventilation of the jacket on the fly to cool down.
     

    1 hour ago, MopedNZ said:

    I remember both years previous that even when it was so hot that you’d wanna pass out while stopped; as soon as we went into a valley or a road which was blocked from the direct sun I got cold real quick. 

    I was surprised at how cold I got tbh. But then on the same day I was swimming at Rere falls because it was too hot. 

    Layers are good. Also means that we can just strip for each other as entertainment beside the lake. 

     

    • Like 1
    • Thanks 1
  5. The hell? That bike's way too fancy for escapades! I'd be keen to see if that bike can still do an escapade when it's 40 years old like my A100 dual-banger!

    On that note, I'm pretty sure that the manufacture date of my A100 is either November or December 1979. This undertaking will be it's 40th Birthday! I will celebrate by eating cake drinking beer, gin and/or purple goannas.

     

    On 20/11/2019 at 09:51, MopedNZ said:

    Prepping a road legal 49cc Motard for the event. 

    New tyres and Chain today. Now for everything else! Got new front and rear pads/shoes for my bike + new black and gold chain for extra nangs. Looking forward to getting amongst it! 4 Stroke for the win.

    74209890_2567923453245859_5076493559658446848_n.jpg?_nc_cat=107&_nc_oc=AQkxe8e_Gnv9O-coomdT2t9j4JnawSUfsnv0G2VnEdYej3ccJt182QyWLNWbn_7MBhWzeTIMrfsXUoZykrGr0Y3J&_nc_ht=scontent.fakl5-1.fna&oh=03c98c45e6a8bb2641affbe515a81697&oe=5E554D42

     

    • Like 2
    • Confused 1
×
×
  • Create New...