-
Posts
3181 -
Joined
-
Last visited
-
Days Won
19
Posts posted by scooters
-
-
are your sure middle earth is not nearer to hastings?
-
- Popular Post
- Popular Post
I took this years ago when we were road tripping around.. hollyford valley into milford.
- 11
-
I might have my story wrong..
It might have been in the te ureweras some place.
-
-
Has anyone come across the bro's in the far Noth asking for Koha to access the beach's and other cool spots.
That really set me off when I got told that story...
- 1
-
while it's in de gas mode. Id be putting a drain bung in.. especially if it's going to be on going.
-
once your done you can tip a epoxy in there that the fuel wont eat and coat the tank.
All aviation fuel sites have the filter bowls covered in the stuff. It works a treat.
- 1
-
fark dad caught a real stinking Tom cat at his place in Tahuna.
thing had no neck. Butch and wild.
awful thing.
- 1
-
-
-
43 minutes ago, Nominal said:
Technical Advisory Committee, but yes.
Wow ok real banging heads stuff. looks like a lot of that could be just supplying the data. Would not surprise me if there is a program that they punch it into and out spits go, no go based on measurement given. ?
-
Is the design approval a knights of the round table discussion?
Where by all the LVV guys all get together and decide if they are happy with the idea placed in front of them ?
-
time to pull it down put it to the side and build a 5K.. It may just need some valve stem seals... But id expect big puff's of smoke on start up.
I had a set of twin J carbs once upon a time I still kick myself that I let them go.
-
iv just wire wheeled and brushed all the K frame / arms and rails of my 260C with PA10
It wasn't that bad to do but i'll spew if I have to do it again in the next 5 years.
- 1
-
I see POR15 being slagged all over the net they reckon it was good now they have changed it too much and it's not as good.... I bit the hook and decided to use PA10 (international paints)
is it same bum different undies kinda thing ?
-
1 minute ago, Muncie said:
This'll be the 3rd Commodore ive bought with a "blown head gasket" for fuck all this one had a blocked thermostat the others had perished heater taps the people put water back in but didnt bleed them so they would get hot.
suppercharged?
-
yea tons and tons of vally gaskets they are shit. Remember to use 3 bond in the corners with the new gaskets or they leak like fuck.
The other big thing I remember is bleeding the supercharged v6 after cooling system work is a must.
3 Bleed points in all. They arn't actually all that hard to bleed but it's important otherwise air lock.
They cant bleed if you just use the cap.
-
sensational
-
3 hours ago, cletus said:
weren't they bad for cracking heads?
Spent 7 years at Holden during the period of VY. I don't recall any heads cracking. Thats not to say they didn't I just dont remember doing any.
did do head gaskets from time to time. But you had to try pritty hard Iron heads and Block with the overheating.
ls1 had piston slap issues.. did a shit load of builds on them new slugs and rings.
hermmm...
- 1
-
be pritty unlucky to have toast head gaskets with one of them.
-
On 23/01/2019 at 21:05, Dino said:
Name: Dean
Location: Currently living in Murchison
Cars you own: XY Falcon, EL XR6, EF 5L Fairmont Ghia, GQ Safari
Mods to them (can be brief or detailed): Xy has 351W, C4, 9 inch, but plans include a 427ci stroker with efi, Safari just has big wheels, the others are basically standard.
Pictures (Either attach the files here or use an image hosting website):
How you found out about oldschool: Work mate
Anything else you want to add:
Clearly you work with Vaughn.... tell him I say gidday.
- 1
-
-
-
It's a thing of great beauty mate.
shame it's not all happening in Golden bay for ya. But ya never know right ?
- 1
South Island pesting
in General Car Chat
Posted
$100 a ride i'm pritty sure