NVIOUS

Oh i see. Cheers mate you are a legend!!! Thanks for your help

Any chance u are able to tell me what colours on the back of ignition go to please? I cant make out anything on the pics as when i zoom it it gets a bit blurry

Hi guys was wondering if anybody had a wiring loom diagram for a old mitsi gto need to know which each ignition wire is? Cheers

Might have to give prozac a pm and see which one is which. An as for the dizzy maybe why it sounds like a tractor have to have a look lol cheers guys

Does any body know where the other two vaccum hoses go? And the red hose on the top of the manifold

Ok might just make up an exhaust out of the standard for now so it can go to the sparkys and get the loom done properly and what not. Cheers guys very much appreciated

Ok sweet cheers

So i put a starion engine in my lancer an im in need of an exhaust. Is it sweet to keep the standard exhaust with the turbo motor? Or will i need to upgrade to a 2 an 1/2 inch. Cheers

I used the drive shaft yolk off an old l200 ute that was at pick a part and it fit perfectly into the starion box an on to the 1600 lancer drive shaft

Theres 4 bolts on each side in behind the drum brakes which hold in the axels so u have to take all the breaks off so you can take the axel bolts off then remove the axels then the head will come out

I just modified my original rails to suit the seat so it could still slide back n forth

Ok cheers. I am selling one on tm, and a guy asked if it would but i dont have too much knowledge on cars. But the diff has the same set up as the ex lancer diff

was wondering if a sigma diff would bolt straight up into a 73 gto? or would it need to be re mounted? thanks guys

Ok sweet. I had to move the turbo around to suit the intercooler piping

So the oil feed would go into the part with the two bolts holding on metal hose thing? Cheers