Popular Post vk327 Posted November 13, 2022 Popular Post Share Posted November 13, 2022 had a bit of time this weekend to finish off a side project iv been collecting bits for for the last couple weeks converted a supercheap sandblast cabinet over to a vapor blaster removed the old blast gun and lines, sealed all the gaps in the bottom with good sealant & fitted a 32mm sink waste in the bucket below is a ryobi submersible dirty water pump to mix and pump the slurry of glass bead and water I built a control box with a 12v power supply and a few relays and switches to turn the pump on and a foot pedal activates the air solenoid, the blast gun is a 3d printed hybrid nozzle spaced to suit a 3hp compressor from NZ vapor blast supplies gets some pretty awesome results out if it. really rate the performance over dry sand or bead blast took about 5 mins for the caliper and couple mins to clean up the one throttle body 38 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.