Popular Post ANT Posted June 21, 2015 Author Popular Post Share Posted June 21, 2015 Spent a large amount of time getting these closer to ready this weekend.The wheel centre's took the longest. Removed old clear and hand sanded them to mirror finish. Very happy with the results. Going to look into coating them with something (ideas?) to keep them from oxidising. Yarns -> //oldschool.co.nz/index.php?/topic/47514-ants-tc24-gx71/ 19 Quote Link to comment Share on other sites More sharing options...
ANT Posted June 23, 2015 Author Share Posted June 23, 2015 Took a sick day today. WOF & REGO'd again, let the fun begin.Coilovers and wheels asap. 7 Quote Link to comment Share on other sites More sharing options...
Popular Post ANT Posted June 24, 2015 Author Popular Post Share Posted June 24, 2015 another day off. Andy the piner psyc'd me up at 8am not to waste the day, so i didnt.Sealed focus racing. Then set about doing coilover swap. Got it done, chucked on some 13" wheels from the garage, and took these.its fully captive @25mm. Roughly 70mm left of thread on the front too. BC's are awesome. I will be able to lay frame with 14's. Pining! //oldschool.co.nz/index.php?/topic/47514-ants-tc24-gx71/ 16 Quote Link to comment Share on other sites More sharing options...
ANT Posted July 1, 2015 Author Share Posted July 1, 2015 Well fuck. Got front temporary tyres on, correct sized rear tyres played hard to get last night, so dropped them to be done. Wheels on tomorrow kids! 7 Quote Link to comment Share on other sites More sharing options...
Popular Post ANT Posted July 2, 2015 Author Popular Post Share Posted July 2, 2015 Needs 165 65 14 up front to replace the yuck 195 45 14.Rear needs a HUGE roll. Will take better pictures this weekend. Next up is Stainless pipes and ITB manifold being made i think. 12 Quote Link to comment Share on other sites More sharing options...
Popular Post ANT Posted July 3, 2015 Author Popular Post Share Posted July 3, 2015 Started on rear guards tonight. ^slight roll. ^getting there Made it. ^pretty much the desired height on left. maybe 10mm lower. right is 8jA withthe guards lip folded flat. Tuck'n a 14x8 on rear..Discussion thread -> //oldschool.co.nz/index.php?/topic/47514-ants-tc24-gx71/ 10 Quote Link to comment Share on other sites More sharing options...
Popular Post ANT Posted July 4, 2015 Author Popular Post Share Posted July 4, 2015 Guardwork, Team sticker, more low and almost at the perfect rear height, front still needs 165 65 14 chucked on and more low.Pretty happy.//oldschool.co.nz/index.php?/topic/47514-ants-tc24-gx71/ 11 Quote Link to comment Share on other sites More sharing options...
Popular Post ANT Posted July 6, 2015 Author Popular Post Share Posted July 6, 2015 165 65 14 up front now, Lowered front 10mm, think i need to add camber up front (it has none so far)and more low.maybe lengthen lower arms too. Measured my wheels and they are wider then i thought, A+Car spent Sunday driving around Christchurch causing mayhem which was fun. Needs twin 1.5" pipes ASAP. 20 Quote Link to comment Share on other sites More sharing options...
ANT Posted July 21, 2015 Author Share Posted July 21, 2015 Attemped to draw 1GG intake flange for the start of ITB manifold this week. Need to print it out and check it against the head. Need to sort out front Suspension as it looks crap. So sent front arms away to the babe that is Beachlander to have them lengthened.Then I can match the front camber to the rear.Anyways. Images etc.And a short video :https://www.facebook.com/RiversideNZ/videos/vb.129303667111435/942889649086162/?type=2&theater 5 Quote Link to comment Share on other sites More sharing options...
ANT Posted August 12, 2015 Author Share Posted August 12, 2015 Texture black bumper stripes finally. 7 Quote Link to comment Share on other sites More sharing options...
ANT Posted August 15, 2015 Author Share Posted August 15, 2015 Camber gains via Beachlander@7tune.com 4 Quote Link to comment Share on other sites More sharing options...
ANT Posted August 24, 2015 Author Share Posted August 24, 2015 Modifyed a gx71 Hardtop front lip to fit this. Cut, plastic welded then fiberglassed it back together.Its much Deeper then stock sedan lip plus looks 100 times better.Swapped front tyres to rear to stop rub. Now 175 60 8j / 165 65 9J //oldschool.co.nz/index.php?/topic/47514-ants-tc24-gx71/ 5 Quote Link to comment Share on other sites More sharing options...
Popular Post ANT Posted August 31, 2015 Author Popular Post Share Posted August 31, 2015 Took this to OS Hamner meat's. 300km trip. BC Coilovers are amazing. Had them on full hard with 3 people and a fully loaded car and it was good!Need to raise motor as it had a few hits, 1 overfull gearbox dumped its excess onto exhaust while overtaking and made some smoke and it needs a longer diff as 3800rpm is not fun for 1.5hours each way.Photo By BeardedBastardPhotography Aka Beachlander 17 Quote Link to comment Share on other sites More sharing options...
ANT Posted September 7, 2015 Author Share Posted September 7, 2015 3 Quote Link to comment Share on other sites More sharing options...
ANT Posted September 7, 2015 Author Share Posted September 7, 2015 Page plz. 1 Quote Link to comment Share on other sites More sharing options...
ANT Posted September 7, 2015 Author Share Posted September 7, 2015 2 Quote Link to comment Share on other sites More sharing options...
ANT Posted September 7, 2015 Author Share Posted September 7, 2015 2 Quote Link to comment Share on other sites More sharing options...
ANT Posted September 7, 2015 Author Share Posted September 7, 2015 3 Quote Link to comment Share on other sites More sharing options...
ANT Posted September 7, 2015 Author Share Posted September 7, 2015 3 Quote Link to comment Share on other sites More sharing options...
ANT Posted September 7, 2015 Author Share Posted September 7, 2015 Page plz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.