Guest durty Posted April 7, 2013 Share Posted April 7, 2013 looking sweet man. mine is only a centimetre or 2 lower than that using just 2 inch blocks and diesel landrover shocks and is stiff as hell. must be tucking a bit of rim at that height on 16s? How are you going to get the front as low? inner guards are a dick on these Quote Link to comment Share on other sites More sharing options...
Guest RUNAMUCK Posted April 8, 2013 Share Posted April 8, 2013 Heya Logan, I dude the guy from Quaketown who recomended this site to you. Good to see you made it on here. PLease never quit 360's, I'm going to need parts forever. Quote Link to comment Share on other sites More sharing options...
Guest logan360 Posted April 8, 2013 Share Posted April 8, 2013 Yea I'm looking for number 6 360 as I'm having to get too many parts from the UK. have one maybe two full sets of headlight wipers waiting for me to be less broke. As for lowering front, got some 185/50/16's waiting. so lower profile less width = roll. spacers being made to clear strut as they don't and worst comes to worst with fitting, rolled guards. And as for rear i will probably go to blocks just so i can stiffen up the shocks again. Quote Link to comment Share on other sites More sharing options...
Guest durty Posted April 8, 2013 Share Posted April 8, 2013 I know of a 360 that might still be for sale in Wellington if you are interested Quote Link to comment Share on other sites More sharing options...
Guest logan360 Posted April 8, 2013 Share Posted April 8, 2013 Price? driveability? With my 850 turbo and 850R turbo's playing up I'm not rich at the moment. also organizing parts and that rear bearing group buy is taking a lot of time. can you find out as much info for me please? Quote Link to comment Share on other sites More sharing options...
Guest durty Posted April 8, 2013 Share Posted April 8, 2013 Yeah. Is a red 360. Driveable but no WOF, Being sold by an old lady. I want it but her indoors won't let me. She left a note in my letterbox about it with a photo. Will dig it out when I get home and send you a picture of it with some details. Need any 850 parts? Have all sorts of random shit lying around from one I wrecked. All the relays, dashboard, intake manifold etc Quote Link to comment Share on other sites More sharing options...
Guest logan360 Posted April 8, 2013 Share Posted April 8, 2013 Yea give me details on that 360. what do you have 850? what model was it? Quote Link to comment Share on other sites More sharing options...
Guest durty Posted April 8, 2013 Share Posted April 8, 2013 Had a 1994 NA but grabbed some random bits and pieces from other ones that were getting wrecked when I had mine 3 or 4 years ago Quote Link to comment Share on other sites More sharing options...
Guest logan360 Posted April 8, 2013 Share Posted April 8, 2013 Will keep in mind thanks. Quote Link to comment Share on other sites More sharing options...
Guest logan360 Posted April 10, 2013 Share Posted April 10, 2013 Right guys. my decision. I'm devoting this weekend to stripping all the parts I need off the parts car. i need the space and money so once I'm done the parts car will probably go to pinch a part. so tell me what you need or may need sometime soon. it will probably take me a weekend or two. i don't have a garage or shed so can't really store any parts. Quote Link to comment Share on other sites More sharing options...
Guest logan360 Posted April 10, 2013 Share Posted April 10, 2013 Update. MORE rare bits turned up toda. for starters my spare rim's http://sphotos-g.ak.fbcdn.net/hphotos-ak-prn1/893944_10151325497341507_1932181385_o.jpg And everything else http://sphotos-c.ak.fbcdn.net/hphotos-ak-prn1/901992_10151324816931507_1816727268_o.jpg One early taillight two headlights with wiper motors two panel mount indicators two simply OG oldschool mirrors. this add's to my turbo and oil gauges for in front of gear stick bolt on jdm arch flares for a start Quote Link to comment Share on other sites More sharing options...
logan360 Posted May 24, 2013 Share Posted May 24, 2013 Rightio then. i have made no progress whatso ever with the old girls. instead been working on the R. new refurbished boost making device turned up. came with a feckin mani too so i was like FREE FLANGE FOR 360. so that turbo will be getting fitted in the next few weeks then I'll be able to look at turbo-ing the 360. woot! Quote Link to comment Share on other sites More sharing options...
logan360 Posted June 25, 2013 Share Posted June 25, 2013 So. update. i have done this and this and some of this lol na got wheel number 4 on after previous wheel nut had to be demolished to free up factory wheel. should be getting steering seen to next week with some cleaning all ready for her to roll under the plod radar to the tga OS meet. first good drive in months. looking forward to my manual again. Quote Link to comment Share on other sites More sharing options...
logan360 Posted July 7, 2013 Share Posted July 7, 2013 Right update time. i it my steering sorted he time for the monthly tga meet in which i took the old girl along. its biggest drive in 6 months. 15km. not as much power as i remembered (probably due to my daily's 15psi) but it was good to get behind a clutch again. since then i have put 5mm spacers on so no issues with strut clearance, organized rust being removed. new sill cut and weld wheel arch cut and weld plus new battery tray preventative measure's around all windows top right have rear hatch seal lip cut and weld front valance surface rust removed all sill surface rust removed all of that, put to primer not painted, $450. retired professional panelbeater. which will leave rear wheel bearings rear brakes engine mounts looked at and tires then it'll be wof time. maybe rear blocks. then wof! i am very excite! Quote Link to comment Share on other sites More sharing options...
logan360 Posted July 13, 2013 Share Posted July 13, 2013 Yet another update! two in one month! Ridonculous! anyway rust is once again put on hold for a while. as to why, that's my little secret. Stay tuned! Quote Link to comment Share on other sites More sharing options...
logan360 Posted August 22, 2013 Share Posted August 22, 2013 Crap i haven't updated this for ages. anyway since my last update I've brought a 360 with a snapped cam belt, tidyed it up a bit and sold it on for a profit. My turbo for the 360 has arrived so once the car i'm buying tomorrow (maybe) is up and running my old girl may just get some boostings. the only turbo B200E motor in the country (to my knowledge). should be nuts. Anyway, that's me for another month! Quote Link to comment Share on other sites More sharing options...
robs30m Posted August 27, 2013 Share Posted August 27, 2013 mate sweet action. ya gonna be at tga meet? Quote Link to comment Share on other sites More sharing options...
logan360 Posted August 27, 2013 Share Posted August 27, 2013 Yea will be. my new car need's a gearbox because some genius destroyed the 4wd system so will be in my red one maybe a little late too. Quote Link to comment Share on other sites More sharing options...
logan360 Posted October 29, 2013 Share Posted October 29, 2013 3 Month updates. fuck I'm doing well. Well I've done it. MR300's gone. its for the best though but i miss er already. rust repairs should be started tomorrow. hopefully i can throw money at it from my weekend job and get it all removed. excite! Quote Link to comment Share on other sites More sharing options...
logan360 Posted November 3, 2013 Share Posted November 3, 2013 Right. got my girl back from rust repair on Saturday. there is all this plus each of the sill's https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/1410661_10151674507086507_1980251229_o.jpg https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/1401697_10151674507816507_845843024_o.jpg https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/1074403_10151674508551507_1215153499_o.jpg https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/882339_10151674509311507_1719651235_o.jpg https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc3/892171_10151674510111507_1460036239_o.jpg https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/906167_10151674511456507_644620430_o.jpg https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/886711_10151674512476507_932530650_o.jpg i got all of that done for $300 around £150. What remained of the sill on the left front was paper thin and had a very big hole in middle of. Quite simply I'm bloody stoked! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.