Skunk Posted March 9, 2012 Share Posted March 9, 2012 Hi everyone, anyone know where there's a good article on 4AGE cambelt changing? I searched here and looked for a free manual on the interweb but not found one. Just don't want to remove more than I have to and make sure I do the job right. The 4AGE is in an AE92 FX. Quote Link to comment Share on other sites More sharing options...
toyworld Posted March 9, 2012 Share Posted March 9, 2012 basicly the same as any other cambelt, it goes something like this.. remove top timing belt cover rotate crank to tdc observe tdc marks on cam pulleys maybe loosen off waterpump pulley, remove ax belts etc remove R/H engine mount, suport engine if nessary rattle off main crank bolt remove crank pulley centre and lower covers loosen belt tensioner bolts push tensioner back lock bolt back up remove cambelt and then reverse order to assemble, can ensure belt is fitted correctly by spinning engine round twice and geeking marks, make sure tension on belt is right. check condition of ax belts etc can replace tensioner bearing water pump any leaking oil seals if you want.. its up 2 you 1 Quote Link to comment Share on other sites More sharing options...
Skunk Posted March 10, 2012 Author Share Posted March 10, 2012 Thanks for the advice toyworld. No big surprises - that's good. It looks like it might be easier if I remove the radiator hose, A/C pump and P/S pump just for access. See how I go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.