crooked Posted October 5, 2009 Share Posted October 5, 2009 Hey, im just wondering what would fit with little or no modification so i have powersteering in my corona to clear the turbo downpipe when i fit the 1jzgte... what bits and pieces do i need? cheers Quote Link to comment Share on other sites More sharing options...
rob Posted October 5, 2009 Share Posted October 5, 2009 I have a '79 rt132 and I'm pretty sure it's got a steering box.. When I did the conversion from steering box to rack & pinion on my ae70 corolla I needed: [*:1asqjiyt] Rack and pinion steering column[*:1asqjiyt] Rack and pinion steering column shroud-thingy (end of the steering column slots into this and then it bolts to the firewall)[*:1asqjiyt] Steering rack (obviously)[*:1asqjiyt] Steering rack engine cross-member[*:1asqjiyt] I also used the lower arms, but I think the steering-box lower arms would have been fine. Got all these pieces from a steering-rack ae70, everything fit up with no mods. I'm guessing the same would probably apply to your car - find a rt132/tt132 with rack steering and grab all those bits I listed above, swap them into your car and you should be right This is assuming there are t132's with rack & pinion (does someone know?), if there aint you'll have to find a rack setup from a different car (maybe a newer corona?) and chances are you'll need to do at least a few modifications to fit it. Quote Link to comment Share on other sites More sharing options...
smokin' joe Posted October 6, 2009 Share Posted October 6, 2009 #A60 series Celica/carina would be very close if not a bolt in Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.