rb drifter

nah didnt try them on the front will do next time he comes around though

my 15 by 8s 0 offset on sam dx bro...

they fit alrite but if you want some real stance get 15x9s with 0 offset and 195/50 tyres and roll your gaurds

got another loom for it as last one was a bloody mess, i stil have no idea how to wire it up so will leave that for a proffessional. also got some steel wheel bands from mackaz, they 14 by 8 and 14 by 9, will probly put my sigma centres into them and use for skid wheels.

need to tidy were old centres were cut out and might just raw and clearcoat wheels or otherwise let rust or something so they look phat

spotted this on the way to pick up my mates van. didnt have my camera so went back next day to take a pic

bro you can come round to mine and try my 15x8s they 0 offset so would give a fair idea to what your wheels will fit like i run 195/55 r15 lil bit of strech as wanted to keep it legal for cert, and mackaz (deon) at the tyre place will be able to help you out hes on bro

seen a very tidy origanil gold/brown 81-83ish sigma wagon parked at harvey norman in whangarei today couldnt help but go check it out, didnt have a bloody camera with me tho

also seen a 79ish sigma wagon light brown with twin headlight front, sacked out on sum ballin chromies cruising along riverside in whangarei

got me so tempted to sell the van and go buy one....

sweet ill pm you if i cant make it for any reason

found that my r31 struts fit into the front of the sigma and are shorter than sigma struts. im using lowering springs out of my honda struts, they are just uncaptive so plan to get shorter shock inserts, make top/botom hats to suit spring diameter and shorten the strut itself to get siting just a tad bit lower.

yo sweet shuld be in town this weekend coming up.

yeah ill be keen is there a pair or 4 of them? would look prety sick with sigma centres

aw yoew shot ill go hit them up one day

haha yeah bro i cut them down cause it failed a wof for them but will be welding them on again after wof to keep it looking bad ass

anyone know were i can get some steelies widened in whangarei area? chur.

ill be down to come if i find a mate to drive my skidline, what time though im busy for part of sunday

swapped my van for this, was completely standard apart from rear lowering springs.

so far....

rb30e factory manual

s14 cut springs and shocks in front

s13 front hubs, knuckles, brakes

s13 lowering springs in rear

15x8, 0 offset sportmaxx rims

dildo shifter

drift steering wheel

now it looks like this....

that was my orriganil plan but i cant seem to find one of those multipoint intakes atm so was just gunna run all standard shit to get it running in the mean time, in the near future i hope to get it running a bit more boost with a decent turbo and intake setup.

illest badge that i found on trademe, payed way too much for it.

standard steelies i plan to get widened about 2" and use for skid rims

starion loom that i got with the motor when i bought off my mate, as you can see its been stripped back and is an absolute mess. looks like ill have lotsa fun sorting this out.....

few pics not that good quality.

chuur bro, yea its not too bad aye best sigma ive had so far just has a litle rust in the doors to sort out and thats about it. will have to get better pics one day current ones are off my ipod and arent that great.

sportsmaxx rims would look sick on a cortina.... i say do it.

is it possible to run a dohc 4g63 head onto a sohc rwd block? would be a good combination to run in my van if it works....

sussed a turbo gearbox finally!! got a 5puck heavy duty excedy clutch and had the flywheel scimmed also. got the motor and box together and sitting in the car now but need to make an adoptor to line the gearbox mount up. also got a deep dish drift steering wheel and dildo shifter.

decided to use a td05 turbo but will have to make a custom manifold for it and angle it due to the powersteering pump being in front of it. will get onto that once i sus a welder.

dished 14s with stretched tires, more slammed, rolled gaurds with minimal tire/gaurd clearance....

youll be pulling all the bitches bro

finally got my wheels they are sportmaxx 15x8 with 0 offset in full mattblack, at first i wasnt sure about full matt black but once i seen them in person i had to have them.

started puting motor back together but now need a new oil filter housing as i cracked the origanil one.

only other thing i have done to the car is tint strip on front windscreen and tinted front windows. was going to start work on suspension but moving house so need to keep it rolling for now.

will upload pics soon.

1992 nissan laurel got it a week after i turned 15, ripped all the auto diesel shit out and put a rb30e and manual in it, lowered it ect. felt like the coolest kid ever until my mate got a rb20det cefiro, glad i sold it cause it was full of rust