-
Posts
316 -
Joined
-
Last visited
Posts posted by waspman
-
-
Not surprised that you had issues with SIL, now owned by Motion and all the decent staff left, another one to try is Deviceco Pneumatics if they can't help they may be able to point you in the right direction.
- 1
-
-
57 minutes ago, tortron said:
But I found this on a wanted oage
For Mazda Rx-4/Luce Coupe -73-75 i'm looking for these parts
NOS or really good Side vents on C-pillar with the Orange Resin [ Picture...> ]
Looks similar to the bottom one, looks like it has a tape on the back and it just sticks on
-
Can anyone confirm if this is the centre of the Rx4 C pillar badge?
-
- Popular Post
- Popular Post
Found another sign covered in paint, this one was much harder to remove the paint from
The whole sign was covered in paint, I believe it was used when testing a spray gun for painting.
Tried a few different thinners/turps etc, ended up using some old paint stripper to soften the black paint and then scrub with commercial thinners, unfortunately the fine black outline on the lettering has been lost but it certainly looks better than before.
still looks a bit shit but will ok for shed art.
- 19
- 2
-
-
-
-
-
-
-
6 hours ago, cletus said:
Maybe to an aussie with a s1/2/3 rx7?
So they can fit 22" Simmons
Will be sending them straight to the scrap man to avoid that happening
- 2
- 2
-
Does anyone know if 626 rwd front struts are useful to anyone in the old mazda/rotary scene? Cheers
- 1
-
-
Approx. 132.7mm, very hard to measure tho
-
35 minutes ago, Dudley said:
Anyone able to measure some for me?
Stock RX3 - 47mm
- 1
-
- Popular Post
- Popular Post
The panels are a little sunburnt
but it has come up pretty good really
want to hook up some LED lights but have no idea of where to start, might go to Jaycar and see what they suggest
just need to get some rivnuts so I can screw the top back on, all the fastenings were corroded/snapped and the internal flouro tube setup had already been gutted.
Not sure how to mount it in the garage but will sort something.
- 32
- 1
-
This is not something I have built, more like something saved.
Came across an old car dealer lightbox that had been painted over many years ago
It was in pieces so I paint stripped the aluminum frame, everything was covered in a thick coat or two of cream coloured house paint.
Inside of the lightbox looked good
Noticed when cleaning up after paint stripping that the ancient can of thinners I had softened the paint quite noticeably, not knowing how to remove the old house paint without damaging the plastic sign I decided to test a small piece, to my surprise it softened the paint nicely allowing me to gently scrap the paint off
After quite a few hours over a few weekends it was time to reassemble
- 5
-
-
Looks good, 3 speed 90 with the large engine door? Or asthmatic 50?
I have the early model 90, 1965, 3 speed with small door so engine upgrade options are almost nil. I used to have an SS90, that was a fun scoot - one I should never have sold
- 1
-
-
5 hours ago, dabuzz said:
Yup nothing atm, early ones are hardto get, mine fell apart and I'm so close to start-up
How similar are they to 808? I have a bunch of random mazda ones including 808, unfortunately i am away until next weekend, let me know if you can't find anything
-
- Popular Post
- Popular Post
-
Try Seal house Howell Ave Wiri or Seal innovations (SIL) in Onehunga
Old Lathes and machining shite
in General Car Chat
Posted
What solution did you find for your pneumatic issue on the feed?