Raizer

.

.

.

.

Dude before you buy those pistons you want to make sure they are dished topped otherwise compression is likely to stay the same as standard pistons.l

Unless the gudgin is set higher up the skirt.

they got soundstream 480.4s at parallel imported for $250.

dont really understand the ohmage type stuff though.

RMS @ 4 Ohms 60x4

RMS @ 2 Ohms 120x4

RMS @ 4 Ohm Mono 240x2

im guessing mono means bridged. but would still prefer to have 120 running to 6x9s if they could handle 2 Ohms???

Bridge the rear lines/channels into 240w to run your sub (im guessing its single voice coll), then run you 6X9s off the front outputs.

Or better yet ditch the 6x9s and run some good fronts off the front channels!

See if you can find some one selling a second hand soundstream 480.4 (then again there only $4/500 new) it should do the job.

mums farm cool lots of space to store stuff haha give us a yell when you go out and have a look if that is ok thanks Andrew

Yeah i had 15 parts cars, 3 thrashers, and 2 good 1s there at 1 stage when i lived there!!

can you tell me the size between the studs and the center hole thanks andrew

I would if it wasnt at my mums farm 1/2 an hour away! But they are the mk1 big hole 1s.

yer i would but i dont have any at all and they seam very hard to get good ones thanks for your help

Im not sure of there condition but iv got a pair in my mk1 parts van.

Are you meaning the mk2 struts won't fit in your mk1? if so just put the mk1 tops on them! And i would recomend staying away from those cheap weld on coll over kits! A mate of mine's got them in his mk1 and has had no nd of trouble, ie striped threads on the seats, crap springs etc etc.

.

.

.

2JZ-GTE!! With the ZX80 6 speed!!

Drop the ol 3L ford v6 into it! Ha and il even sell you a 3L GT diff/leaves for it lol

.

.

.

.

.

.

.

Go and upload pics here: http://www.imageshack.us

.