-
Posts
32 -
Joined
-
Last visited
Everything posted by jNINE
-
Yeah, I rearranged all my albums at photobucket which broke the links. you can see the pics at http://s11.photobucket.com/albums/a159/janenenc/ There are albums for each GTO.
-
lol wish our GSR looked like that though!! Still can't find a grille for it will look a million bucks with flares I reckon - I still have to order a set for ours from there FYI - my GTO is going into the panel shop next week to get the drivers door fixed properly (it was a bit wiggly after a poor repair)
-
KYB any day over Munroe. We sell both brands and Munroe have started cheapening their product using plastic valves etc. I have KYB in the rear of my commodore and GC Galant rally car.
-
Spent the weekend stripping out the interior (great fun in 36 degree heat!) and installing new carpet & underlay and painting the dash and console black... much better Next thing to do is finishing polishing the Montego's I have for it and fit the lowering blocks & lowered springs also re-woodgrained and covered the hole that is way to small to fit any form of radio/stereo. Having a CD player mounted under the glovebox this friday. Also woodgrained the handbrake cover
-
The flares on one of ours are smoothed over but we are having problems now where cracks are appearing where the bolts/rivets are even to the extent of a round section starting to come out
-
They look like the factory bolt-on flares that came standard with the GSR if I am correct?
-
thanks ppls.. I can't wait to get new wheels on - 3 are already polished and just need a tidy up - but sanding all the ridges out of the last one is a bitch!
-
They retrimmed the centres with velour - looks much better in real life than in pics. I have original all-vinyl seats in another car - but I like the velour I think - much more practical for Qld weather! Originally they were fabric in this car but probably went daggy - another set I have has black & yellow fabric looking pretty second hand!
-
Took a few more pics of the interior...
-
ok.. I've seen the montego's on datto's too. Until I get around getting tyres will put some 14" sigma alloys I have on it. A friend has the pepperpots on his Starion. I just had the plain old steel rims on my celeste with chrome trims. It was a bright orange beasty with kinda fancy pinstriping - very very easy to get the back sliding out on!.
-
flares one day... maybe (like the red one which has 15 x 8 hotwires as well) the Montego's look like this.... $250 for a set of 5 which I thought was pretty good
-
I'll take some more - I only took those few quickly for insurance company I can't take the credit for the resto (although I wish I could)... but I'm gong to replace all of the bits that aren't quite right to make it even better. (chrome trim, grille etc)
-
awwww... Yours is nice too... I like the simmons very very much I wish our GSR could like like that.... but alas... she's alsays destined to be a bit of a 'roughy'. The damn grille has one end broken off !!! I picked up a set of polished Globe Montego's (Sigma Turbo) rims last night for the White one. Have heaps of 15x7 & 15x8 rims but unless I fit flares they are a no go....
-
better post the old commo as well...sheesh I need to buy a parking!
-
Restored one drives pretty average at the moment! It has really old hard crap tyres with 13 x 5.5 inch rims with a wheel alignment done with string with a bit of positive camber thrown in as well! Tyres howl like crazy around slight corners! Bought some 15 x 6 sigma turbo rims last night which have already been polished - just need to give them a bit of a tidy up, some good tyres, and a bit of a play with the lower control arms to get it handling well. Engine, although relatively new, sounds a bit pistony so we will probably chuck our 4G35 & running gear out of the red car in it. (yes - 4G35) At the mo the one being converted for club motorsport use has the 2L motor (it's a GSR). I think plans are to get a 2.6 block (magna here) with a canter head (because it has big ports and small combustion chamber) - that's what I've been told anyway - the boy is doing that one!
-
just saw you are down the coast Alfadog... I'm in Brisbane
-
bit difficult to flick to Feilding!!! But I guess you can take many Freedom Air flights from Palmy and take back the one in primer bit by bit... (shell might be a bit tricky though) I bought the white one virtually as it is as my other half and I run a motorsport tyre business and compete in motorsport ourselves, and having so many cars lends little time to the resto project. So, therefore I thought - might as well buy one with most of the hard work done when the opportunity arose. I really wanted to restore the other one how I like, but I can still personalise the white one. The previous owner didn't have all the original parts which I have so I can add to it and make it even better that way. I also have new black carpet which will make a big difference. The 74 model which is being turned into a club motorsport car (which the red one is at the mo) took a bit hit in the rear at one stage and wasn't repaired 'quite right'. Although it looks good in that pic - the red one is riddled with cancer (speed rust) and past saving I'm afraid....
-
I've also got some lowering blocks and lowered lovells springs to fit.. and am on the hunt for some wheels.... 15" sigma turbo maybe - or might go for minilites. Could put the jellybean mags on that are on the red car... but not sure if I like them really...?
-
I've since changed the tallight lenses around the right way so that the red is to the outside.... actually the white GTO should have all red taillights - but they have been changed at some stage, probably due to the local authorities....
-
Here are a few pics of my GTO's in Qld Australia - a 71 model in 'almost' pristine restored condition (there is always something that needs finishing or improving), a '72 that is destined to be the parts car, a 71 model that needs restoring and a 74 model (which I don't have pics of) which is just having a 'tidy up' and will be used for club motorsport events. Oh.. and the old rally car (aka. the fun machine) I'll probably sell the rolling shell/project soon to make space!