escortwags

and what do ya know it was a perfect fit!!! TADAAA and the view from underneath Just have to go to bolt man and get 8 big as hex screws, the plan is to have one going all the way threw both brackets with two nuts on it one tightning the bottom and the other holding the top in place...(explained that real gay pics will show what i mean) decided to dummy up everything else in place looks like a P lab now hahaha And thats it for now, purchased me the gearbox rubber mount so i can finally make the bracket for that this weekend, and got me a cut off saw so next pay day should see a whole heap of exhaust pipe and dynamat so i can finish off the boot + carpet Cheers for looking

allrighty got motivated over the last few days, etched primed the boot and underneath and then sealed all the joins with silicone so after that decided to go get some stainless flat bar to bend up, once i got it home discovered there was no way in hell i was going to get 90' bends out of it without mashing the living shit out of it, so off to the steel benders it went. And the end prodcut was these super good quality and followed my measurements to the t Didnt want a rattley tank so covered them all in a good old camping foam mattress, managed to get a grey colour so it doesnt look so gay so once they were glued down and slid over the tank (a nice tight fit) it was time to stick her in the whole..which the tank didnt agree with as the foam added a tiny bit to much to the width...buuuuut that was nothing a grinder and a few wacks couldnt sort out

have you not heard about simmons stopping production? even if they were able to help the exchange tax and shipping would be killer!

so the $235 each is for how wide? sounds reasonable if they have to polish it aswell will give them a call would also be the inside band getting remade as the outer one is fine, wanted to widen them towards the car not away from it

im allowed to widen i want more tyre on the ground!!! plus going to space out the backs so the rim lip makes love with the wheel arch

Saw a thread a while ago bout getting steal bands made up but cant find the dam thing!!! Is there anyone in auckland that has or can make a band to sandwhich between the pieces? after another 2 inches any help would be much appreciated If not in auckland anywhere would be great, just dont want to spend to much $$$ as new bolts for them are going to be over $1 each and theres alot of them

man ive been a useless prick keeping this thing updated ok so on the weekend we finally got round to welding the boot up thanks to me bro Marcus his welder and a few beers being drunken turned out pretty mint, took a photo before the etch primer went on Also got the manifold rewelded and moved further out from the strut, and got me a nos starter motor for cheeeap, pics to follow will hopefully get the straps pressed up for the drop tank this week *fingers crossed*

man i havnt updated this in ages! yep definitly keeping it 616 hate cars trying to fake in 808-rx3 etc, cars moved house with me just havto upload some photos of the progress in the next few days

moved whare last weekend further out west so no updates except the car got up to 70 kmp/h!!! on a tow truck might buy some steal this weekend and sort out the god dame boot but still sorting the shed and and shelving at shit will try get some picture action on Monday

hahaha aint no roof racks going on this car i can assure you!!!!! hopeully gona finally get round to welding the boot in this weekend then plum up all the fuel system, should be a nice easy clean task for a change oil coolers not upside down no more..it couldnt fit behind the grill how it was anyway yoeddynz you should bring me over some cheap bloody rotarys ya lucky bastard!

another pic of fuel rails, looks like a pp manifold hehehe Also managed to finsh off the alternator bracket, so it pisses off to the side and not on the top looking all gay thats enough updating for now, how lame

a few Just got to get primary rail aswell thinking of going medival and running water injection rather than sweet smelling meth..been doing a bit of reading on it and it sounds the go all the ausie cats have been having suceess, just worried about tuning over here

and heres my steering wheel 100mm's of deep dish goodness, makes the driving position soooo much better and the suede (however you speal it) it super nice and grippy

well heres my fuel rail action ive just purchsed just pondering wether or not i need to bother with the primary rail now or just block it off and the plate feeds into each runner top half of manifold sandwhiches between the two, only raises the lot 20mm or so just have to go to bolt man on saturday and get some longer cap screws to bolt it all together thinking of powder coating the intake runners but polishing that plate inbetween to buzz people out

ooo got me some nice new fuel rail action this arvo in the mail might or might not post up pics (will see if i can be f'd) oo and pics of my steering wheel that ive fallen in love with

hahaha, just dont touch your little peepee for to long or it will fall off

thought the bum of my car was getting rejected, so heres the back end of her

heres some random shoots after i got the steering working now can turn with a the steering wheel AMAZING!!! atleast the coolings all mounted up not to much more to do before the big strip down and my pretty back wheels, that need shining up have collected about 3mm of dust sinse they were polished to perfection! have to stop the temptation of touching them so they dont scratch!!!!

heres a picture of my trusty gearnkob "SKULLY" been on my last 4 cars hes very old and solid steal and a better pic of the EWP and my cool stereo that im not going to replace..it works mint and plays threw the original speaker in the dash!! no knobs broken or anything, pretty hard to find which i like

updated a bit more now has a page to finally!

when getting angry on the steering column managed to brake this bit of metal..nothing a bit of solder and patience couldnt fix and heres another buy got it off a mate..just a dirty old momo boss kit way better than the cheapy brand ones, just traded some metal for it

and heres the back seat all finished with crap spewed everywhere in the shed until...i tidyied it up after putting the back seat in...looks super lush being black NOM NOM NOM

heres the EWP mounted with the hoses jsut need to make a small bracket or use good old cable ties to hold it tight against the pipes so she dont move around at all. might piss of the steel pipe and just have hose, undecided on that matter so far. can also see how the radiator is all mounted up heres my mc triple stack mcDonalds could never make something this sweet pretty much the only way i could mount the oil cooler was like this think its sweet though will get heaps of air..and my pretty black front looks so much tidyier!!!!

ummm heres the boot and a big hole with the box section used thats going to hold the tank and floor up fingers crossed welding it in FINALLY this weekend!! boot needs a massively good clean up and strip oo and my super professional spray booth got more angry at the calf shit orange and decided the back seat needs a going over

painted up my door cards with a million coats of vinyl spray came up super duper mint makes the chrome strip in them look uber awesome way better than the calf shit browny orange they were inside of car looking dirty after attacking steering column for a week note how its a 2 piece shaft..made me feel wierd