escortwags

20B sequential ya dog

Hi @cletus hope you're well

Hopefully another quicky for you  Do you see any issues with this notch at all? Keeping in mind that it will also get plug welded and fish plated.
It's made out of 10 Gauge CRS, I have the car construction manual but it doesn't really go into deal on C notches.

https://www.murraykustomrods.com/store.php#!/1949-1954-Chevy-Car-C-Notch/p/124962205/category=32296533

Thanks

Motor down lower? I run a banana and my motor is sitting pretty dam low! Any lower and the sump would not like life (doesnt already)

@cletus - Thanks for that, looks like Ill go down the path of a much more "known" 4 link setup like the kit below then for the rear
https://www.ridetech.com/product/weld-in-air4link-parallel/

@cletus Couple of Q's for you when you have time  

Do you see any issues with the modifications done on the link below "in principle" to allow the front of a 1952 Belair to be airbagged?
https://www.lowrider.com/how-to-tech/chassis-suspension/0603lrm-cheap-air-bag-suspension/

Do you see any issues with using the below kit to allow the rear of a 1952 Belair to be airbagged?
https://www.jimenezbroscustoms.net/product-page/1949-1954-chevy-car-2-link

If my questions are to broad just let me know

V keen on those but oh so far away

On 24/10/2019 at 09:47, 64valiant said:

sweet as, note taken of how to be childish.



what ever happened to Marcus's bmw? 



did it sell with the rotary in it?
 

Parted and and all bits sold separately. Shell is destined to have a BMW motor thrown back in it

You beauty, thanks Mr Cletus!!!

Very generic question but.....Mustang 2 front ends to fit early 50's chevs. (Wanting to bag the car and this seems like the easiest option)
Are their any brands from U.S.A that get the instant tick of approval?

On 21/06/2019 at 20:18, mjrstar said:

I feature in that thread quite a bit. Painted in 2011 some time. The daily spot is still mint as is the long term projects spots. The main working zone is getting more of a workout with current racecar engine crane work and the car up on axle stands after every event. No lifting or fading of the paint.

More scuffs and dulling where its gets a workout with the trolley jack etc but puddles of antifreeze, brake fluid engine oil still wipe up with ease even if you don't see them for a month or more. 

Parking up the car with hot semi slicks is not a problem, it darkens and leaves a witness spot which rubs off after a while. 

Sweet, what was the product you ended up using?

1 hour ago, Bling said:

Few options in there

oooo thanks, I had a quick search but failed earlier today (that thread is a tad old though??)

Thanks

Will put yarns once we are deep in the project, earthworks has only just been completed. Went with Alpine Sheds, old man would kill me if I got pressed steel he reckons haha.
Cost to date is horrendous. If its just the shed price you are after we got it for $71,870+gst delivered.

Ill take a look at that link

 

Hey guys

We have a new build underway that has a 180m2 shed. After any real life experiences in what is the best bang for buck water based epoxy to apply.
How long after the slab pour do we need to wait to seal it?

After a light grey colour for max brightness, if that makes a difference. Based in Auckland and will apply ourselves.

Note: Everything I own leaks every type of oil known to man

Thanks XXX

^ the above wheels are for sale if anyone is keen?

NaN

Wheres all the pretty Japanese (in need of a refurb) 14" 5 stud wheels for sale?

Always a good watch, my home town for many years!

Myth 16 - 12APP
Hampton downs national circuit
worn Hankook semi's
1:16.8

Hampton Downs International Circuit - 3.8km

Mazda616 - 12APP - Hankook Z241's

1:55.8

some brapping from RE-UNION on the weekend. 
I chase Round Dufmans RX3 at the start was super fun (Richard or Chris was driving one of the two)

My ears still hurt from the weekend

9 hours ago, 64vauxhall said:

yup i came here to ask who runs what oil and how much to how much gas.

cheers also here is a video to keep you guys happy
 

 

Motul 800 2t
100mm to 10 litres
DOES NOT SEPARATE
Smells yummy
Available direct from Motul in Penrose or random bike shops round AK

Anyone have some 4x114.3 titans gathering dust somewhere?

Ive run Vitour Galaxy for a few years from STA parts, nothing wrong with them & cheap as chips. They smoke like crazy when you skid them which is a bonus.

White wall does go yellow if sitting for ages but im assuming thats pretty normal

Will be buying another set once these do too many skiddies.

There aint to many options unless your prepared to spend a lot of $$$