nels

Firewalls all panelbonded in place.

cars ready to flip up level so painter can finish off the front clip.

Epoxy coats all done.

Polished firewall is all templated and holes drilled ready to panelbond in place.

will do this once the front clip is painted gloss black.

Hope everyone had a good break over Xmas and new year.

i didn’t get much done as we have a new lab pup so plenty of sleepless nights.

painter mate dave come over today yo start masking up and prepping the last little bits.

with any luck will get the epoxy primer and underseal done this weekend.

One disadvantage of having the garage attached to the house is the fumes.

Made up a cheap as extractor fan to help with it all.

Back to the last bit of stripping.

First part of the firewall is all cut out.

im going to cut the bigger holes for the brake booster and steering column out using a local engineering shops water jet.

im getting over this stripping back milarky.

painter friend of mine said doing the underneath is the shittiest part of the whole car building process so looks like I have a few more hours to go to get it ready.

Finally got it up and turned over.

I decided to make a wider base for my engine stands as my mate told me his one can feel a little unstable when you tip the car over.

I don’t have a big workshop to play with just a tandem garage so don’t want to take any chances.

Floor is all tied in.

ready to flip and finish underneath.

Boots all finally welded in

I’m also starting on a cheap rotisserie using a borrowed engine stand and a trademe $50 purchase.

should make it easier to finish up welding underneath and the certifier can see everything in the raw then.

this is a mates one

Car is now in a few peices and the chassis rails are all fully welded through on the inside.

Im going to weld the roll bar in at this stage to make it a bit easier and then finish up the rest of the floor.