Transom

Yup or if you don’t have a hoist already buy single phase hoist 

I got new non clear floor single phase cos it was cheaper than clear floor by about $1000 and I didn’t quite have the overhead clearance for clear floor 

bump isn’t a big problem to roll cars over 

49 minutes ago, Cobranz said:

That poor trailer

Trailer is sweet ... leafs are still curved the right way tyres are a good 3 inches off the guards - dude on loader was gonna keep going made him stop 

Revised estimate on au towing - empty trailer weighs 250kg and was 1980kg on the scales with this load .... 

This is solid axle sedan with coil springs the wagons and utes with leaf may be rated higher - ifs rear prob lower 

1500kg tow rating factory towbar on the autos —- mine tows more than 1000 kg of coal on a 500kg trailer no problem regularly 

https://www.supercheapauto.co.nz/p/toolpro-toolpro-12v-mechanics-power-tool-kit/573291.html

So why are you after a Geiger counter ? Got some old watch dials to lick ? Or have you possibly uncovered a terrorist plot ? 

Maybe is that a geotechy type device ? 

Na but keen to get one as I sometimes work right next to the largest uranium source discovered in nz so far - to aliex to look for one now 

what are the utes you sometimes see with the radiation hazchem Symbol on the dg placard ? Rad source and counter for pipe testing ? 
see them a bit / one got stolen last year and they had a wee panic 

So are the brand new triton 4wds - stupidly high first gear - they need different diff ratios for the 4wd - 6th gear 100km is almost fall asleep and not far off stalling 

Na he is sold on this flat 6 thing - commer ts3 it is then lol

Exposed some more of not so minty Telstar ... then it returned to its mineral state - buried 

if someone really really wants parts I will give you gps coords and a shovel 

The one on the left is the boxer/ mastiff - still had Leyland 401 engine 

Things were getting strange during the Leyland / bmc merger 

Forgiven - nice photos - I have a reference Leyland in back yard 

ignore the mint Rfb VL and the sky colour matching the shed 

Leyland and a Leyland (Albion ) ^  at Wreys Bush ? 

 

3 hours ago, KKtrips said:

No different to people faking plates/declarations as they do now. Expect a trip to court wnen you get caught. 

This has been thought of and there is a mitigation in place. Not sure if it is my place to say though.

Also people will be able to access the info without an RFID scanner. You will require 2 codes to be entered manually in place of an RFID scan. It won't be a number plate as one because they change.

Yeah won’t worry me as I like to roll legal 

can see Johnny rfb hacker trying it on just like they do now - good there is a plan in place 

I see there being a great market in bootleg lvv discs that QR code  link to a hacked page showing sick modified car as all legal occifer...

Yup weld it - sleeve inside plug welds and done - still way better than anything involving a quill stem adapter thingy ... 

Yeah i see ... that headset is a very tall stack ... And the stem is huge...depends how much $ it costs for a new lower stack one and a lower stem - still may be cheaper than welding 

There was a reason they stopped using those quill insert stem things on anything but crap bikes  - they were shit 

have seen steerer tubes welded  even alloy ones no problem if done properly - but if ya can buy a 20$ stem and not have to fuck about then yeah ... 

5 hours ago, M Night Shamalayan said:

. 

Edit: I just clicked as to what you mean by bmw stem, I assume auto correct from bmx? 

Yup meant bmx stem 

there are lots of very low stack height stems around in various lengths and prices - local bike shop usually has a huge box of them to dig thru 

A low stack height stem would get that on there - also lower stack headset 

if i can see the steerer above the top bolt of the stem it’s ok ( bit more for single bolt stem) 

some bmw stems are super low stack but only 7/8 handlebar 

Show us a pic of the setup - welding may be more expensive than just get a different fork 

Nope - shorter stem and lower stack height on the headset bearings 

or just don’t do it find some with longer steerer tube 

some are replaceable can press the steerer tube out and replace 

Don’t risk your face or a snapped neck it’s just not worth it