Crispen

.

@187inc got pics of your crossmember and shiz?

so didnt really get thoughmy list for today as other "life" things happened.. but did manage to get most done. Found the orginal steelies and pumped them up and chucked them on for a laugh...

Sanded back the bonnet and gave it a lick of primer..

Finished sanding up the arse end of the car and threw a load of primer all over that as well

First day at new job tomorrow so progress shall slow down a bit unfortunatly... still cant figure out why these photos keep uploading sideways... sorry guys. maybe ill start taking them landscape... that might fix the issue...

You dropped your price quite a bit? Should keep the 1.6 snd sell separate...

This monday morning I managed to get a couple things done after i got my wisdoms taken out.. Fuel tank was a bitch to get out. couldnt undo the bottom nut to release the fuel hose so just chopped the cunt off and drained the litre of fuel that was in there out. Bottom of the spare tyre well and under the petrol tank are pretty rusted. fuel tank side being worse off than the other..

Also took drivers door off, disassembled and sanded back. hit some filler so just left it there for now.

To do list for tuesday:

Removed rest of doors and sand them all back

Attempt to pull pins from hinges (will need to buy a pin remover)

Remove windscreen and rear window and assess for rust.

Remove bootlid and start to attack the Boot floor

Also looking for a good panel beater/ painter in the Tauranga area if anybody knows of 1. Pref someone who is all about old school cars.

Didnt have much free time over the weekend, but still managed to get a good afternoons work in on sunday.

Got the back panels all sanded down with pretty much no issues. Everything is real straight which im stoked about compared to the front.  found 2 patches of filler. 1 is a repair i had done a year ago and the other i dont know of. just gotta leave the filler in its place at the moment.. Also sanded up around the pillars. Each pillar has had a repair at some point. All look in good condition

Sorry about sideways photos. im taking them all portrait style as i thought that would stop the issue...

Another good day today. took engine out and started to strip down the engine bay. taking out the brake servo tower was a cunt of a job i must say. feel like it took way longer that it should have.. dont even know if i want to put it back in...

Left side is nice and straight, right is pretty patchy and rough..

Cleaned everything i could with the angle grinder. pretty much onto hand sanding now... any tips for getting right into the corners?

right side panel work which looks like its been done by 10 different people..

also a pic of the painted floor which the dog walked over...

So basically just attacking this beast as fast as i can. inbetween jobs so got a few weeks where i can hopefully sand back as much as i can. Brought quite a few strip disks from fielddays so gotta use them up..not sure if i wanna take the entire car back to bare steel as the rear half looks nice and straight. Also fitting a type 9 at the same time so any tips on that would be appreciated. esp when it comes to the mounting of the box. 

Got the floor back to bare steel, no holes to note which was pretty sweet

Started to attack the front guards as they were starting to get quite a bit of acne. Hit some pretty intense bog on the right side of the grill... guessing its been in an accident. all the repairs that had been done have all started to fall away so it will all get cut out and done properly.. underside of bonnet was looking like a bag of dicks so sanded that back as well..

So thats up to date as of the 21st of june. Please note that im not a pro mechanic or panel beater... so any tips or anything would be helpful. Ive brought a big tin of 440 industrial primer, (along with a tin of wax and grease remover, a roll of 80 grit) which im going to chuck all over everything so its no longer bare metal..

Sorry for sideways pics, also any tips chuck them at me!

So basically... the 4speed fell apart. I got a type 9 cheap off the fat man at the mount, started ripping up my flooring to make modifications to make it fit. Got told by a few people i should strip it down to get rid of the rust and for some reason, i listened to them.. This is pretty much where I am to date...

Ripped up the flooring. passenger side has obviously had a leak somewhere. nothing too serious though. drivers side was very nice!

So.. about 4 years ago I brought this little banger off a kid in Cambridge. He didn't want it anymore as it wasn't as fast as all his friend's skylines and shit.

I thought cool, I'll take it.

This is pretty much how i brought it

Nice standard and straight. Good little 1.3 that went hard for the first year i had it untill i managed to get hold of a 1.6 to chuck in.

This is back in 2015. We put the 1.6 straight in, was a cunt of a job without the extractors being on a flange... many a curse word was yelled at me from my brother as he helped me out. The 1.6 went hard for about 6 months until christmas day 2015 where it decided to melt a piston going over the kaimais... So off i went on an adventure to melbourne to work and save money for this engine i wanted to get rebuilt. decided to stick with the 1.6 xflow over a pinto as i felt it suited it better than a pinto and also i wouldnt have to get a cert...

6 months past and i returned from melbourne and the rebuilt banger was ready to be picked up from Stick Automotives in Ohaupo.

Fully rebuilt with all new internals. 

Bored out and honed, 1300 pistons, lumpy cam, 10-1 comp, Ported and Polished head.. blah blah the list goes on. Was made to have sidedrafts but they were not in the budget so it got the 28/36 dcd put back on it...

Fast forward 7 months, the old twin throat just wasnt coping with the amount and gas i wanted to give it so managed to score me a set of twin 40 delorotos off trade me for next to nothing.. got them rebuilt and chucked on

Another 6 months went by which to about feb this year. Moved back to tga from auckland, engine started running like a sack of shit so took it into dynopower to get it properly tuned and balanced... Boy what a difference that made. turns out the little banger is putting out 150hp..

id says 10k, then someone will come back to you with 8k and then you can have a price war with them. i bought mine for 5k 4 years ago and wouldnt sell it for a penny under 10k. Not with all the work and money ive chucked at it. It looks like a minta though. you should get the 1.6 rebuilt and chuck that in, might add another 5k to the value 

49 minutes ago, Adoom said:

Sounds like my Starlet. Disconnect the steering column and remove the engine cross member bolts. With a jack under the engine cross member, lower it just enough to give you clearance to get the gearbox out, without having to remove the engine.

EDIT: Keep an eye on hoses and earth straps as you lower it, or you could damage them.

Alright. Might try that tomorrow. Got pissed off and gave up for the day. Was just going to take the engine out tomorrow but this might be a better idea. Thanks 

quick question. is it actually possible to remove the 4speed without removing engine from the car? Im having a bit of trouble getting this box out. I have removed all bolts cables and everything but the bellhousing keeps smashing into the tunnel and i cant get it to come back the extra 5-10mm that i need to get the input shaft free.. 

7 hours ago, Raizer said:

BNT should be able to do both the disk and bearing cheaply.

good idea! ill hit them up monday. i might do a little build thread when i start it so any person after me can look at it 

3 hours ago, Raizer said:

That looks right to me, 190mm with 23t 1" spline centre.

You only need the Hillman disk, you still use the Ford pressure plate and throwout bearing.

 

If you can find one a stock auto Escort driveshaft and xmember is meant to work with the T9, from memory the xmember gets fitted backwards and possibly needs the holes slotted a touch.

ok cool, ill ask a couple of people with those escort wrecks on trademe if they have a driveshaft for an auto. might look on burton and see if i can just get the disk. need to get a thrust bearing for the box as well. Thanks for the responce 

15 minutes ago, igor said:

I have an idea that backwards cross member thing is what my boss did with his 2.0 litre 5 speed Mk2 Escort. Used the factory holes all sweet I think.

ive heard the same thing. was told i can just take the old mount. turn it round and flatten it a bit and put new holes and it fits nicely. i guess ill cross that bridge when i get there  

On 5/5/2017 at 13:11, Raizer said:

Use a Hillman Hunter clutch plate with xflow flywheel and pressure plate.

Stock clutch cable, Cortina speedo cable.

so just out of curiousity, which year hilman clutch did you use?

http://www.trademe.co.nz/motors/car-parts-accessories/chrysler/clutches/auction-1332333602.htm <<<<< this one?

or does it not matter as they are all the same? keen for this option as it sounds simple.

Does anyone happen to know how long the driveshaft needs to be? is it just 30mm shorter than a standard escort one or something like that? managed to get a yolk from an old transit so going to get a shaft made up using that, just need measurements  cheers

Sorry to dredge this back up but finally getting around to the swap so need to clarafie a few things. ive googled and googled but everyone seems to have different awnsers to the same questions..

To mate the type 9 to the xflow i...

use the xflow flywheel, but change the clutch plate to a 190mm 1inc 23 spline sierra clutch plate but use the pressure plate thats for the xflow. correct?

Can i use my standard clutch cable and speedo cable? i have read i need to change to a rs2000 cables but i have also read that i can just use the ones i already have as they should reach??

Last thing is the drive shaft.. Does anyone know the measurements for the length of the driveshaft. theres a old fat man in taruanga that hordes heaps of crap and reckons he will have the right driveshaft sitting there with the yolk, but it would be useful to have the length so i can meausre it and possibly save some coin instead of getting one made up..

Anyways thats about all i need to know so any feedback would be helpful. 

Cheers

Cheers bro. Too easy! 

7 minutes ago, MaxPower said:

have a whole car if you want one for free, someone is looking at buying it on the weekend for parts so ya better be quick! 

car is in paengaroa cheers

 Yeah man. I can shoot over on Friday and grab it? 

So today I went to flick on my indicators to find the stalk was kinda flopping all over the place... is There anyway to fix or where would I source a new bracket.. the side that controls my head lights is still intact and working. Tried to tape up but failed.. maybe cable ties? :-/ hope the picture works 

my 1.6 sits at 4100rpm at 100km.. your thing must be screaming at 6500 at 100kms...??

rather enjoyed that. apart from the 10 minute start up..

I'm running a worked 1.6 w/ coby extractors, 2 1/2 inch exhaust in a 3 chamber muffler. It sounds good, gets a bit of yee ole pop from the cam, and let's me hear what people are saying when we cruising. I Do miss the old coby resonator and the insanely loud bwraaaps that came with it..