taylerreed94 Posted December 20, 2020 Author Share Posted December 20, 2020 Tidying up little bits while we wait for Distributor and Ignition Components to come back. Fingers crossed they are here before Christmas so I can work on it over the holiday period. Shortened the Dipstick, made a more rigid mount, and replaced the O-Ringed it. Finally mounted the Intake for the last time with the gaskets. Didn't Anti Seize them which I'm now thinking I should have. Replaced all the Hose Clamps on the motor with the same to make servicing easier in the future, still looking for a tidier way to do the fuel lines on the carbs but I think I have that sorted. It's pretty low priority at the moment so it'll come later. Throttle cable has been run, P-Clipped and terminated. I had a mount built for it to allow me adjustment of the lateral position of the cable end. This lets me adjust the pedal feel if I ever need to by moving the position at which the cable is pulling the throttle shaft from. Also has cable tension adjustment. 3 Quote Link to comment Share on other sites More sharing options...
Popular Post taylerreed94 Posted January 18, 2021 Author Popular Post Share Posted January 18, 2021 Tidied up the last few bits, will probably end up making a new set of plug leads for the car as I don't like the factory style ones. The lengths seem strange on them. Dizzy is back in, just needs final wiring to be done and we are away. 24 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.