re201 Posted February 18, 2014 Share Posted February 18, 2014 Does anyone happen to know if the M Series engines have compatible headers within the series or possibly out? I'm looking at upgrading on my M-EU but it is proving pretty hard to find much info. I know Celicas and Mark IIs used them for a minute but I can't seem to get much depth of knowledge. Quote Link to comment Share on other sites More sharing options...
_david_ Posted February 19, 2014 Share Posted February 19, 2014 Does anyone happen to know if the M Series engines have compatible headers within the series or possibly out? I'm looking at upgrading on my M-EU but it is proving pretty hard to find much info. I know Celicas and Mark IIs used them for a minute but I can't seem to get much depth of knowledge. I went to Woolf Mufflers in Dominion Rd Auckland to replace the standard cast iron manifold on my 5MGE with a set of extractors that had to come in from Australia. They didn't fit properly and had to be modified. Australia only seemed to get the 5ME..... It might take a while but you should consider making your own. I did this for the second set and the local welder gave me some useful tips on assembly. I think it took a little over a month as I don't have a welder and would pop up and see him on Saturdays for welding. I now have an equal length (primaries) extractors and with the HPC on them, I'm more than happy. David. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.