Jump to content

mo999's 1984 Alfa Sprint


mo999

Recommended Posts

I have owned this since 2005, used it as my daily for a couple of years.

Its got the 105HP 1500cc Boxer motor, Twin DownDraft 36 Dell'Orto's, this is a rare one being based on the Alfasud mechanicals - Most of this shape use Alfa 33 bits.

So disc brakes all round (inboard at the front! - proper racing spec :doubt:) Very nice induction noise and typically Italian exhaust note - lots of crackles and pops on the overrun due to factory cams having a fair amount of overlap.

 

Its a great car to drive - original spec metric rims have been replaced by these 15x7's 

 

It looked like this then

 

11559737433_6c5fab6cae.jpg

 

I did a few small jobs on it to keep it on the road.

 

The wipers were all over the place - this was why -

 

11559772566_492bb8ed46.jpg

Got some bushes from my auto sparky mate,

 

11559773893_914d5e48b1.jpg

 

Drilled them out

11559667714_6f71c539fe.jpg

Put them in

11559637455_a9e8f5b4aa.jpg

Fixed - mint!

11559773513_196a74589b.jpg

 

Also did the front suspension bushes 

From this

11559773383_a9e1da0860.jpg

to this

11559666934_783b7c1566.jpg

 

Had a great couple of years in it till the typical Alfa rust started to make even my friendly WOF man look sideways at it - so parked to up in 2007.

 

Just pulled it out of the shed the day before Christmas - more to follow.

 

Discussion here //oldschool.co.nz/index.php?/topic/41709-mo999s-1984-alfa-sprint/

  • Like 2
Link to comment
Share on other sites

I could not believe how long it was in storage,

 

11559741716_855ffd842d.jpg

 

So I decided that to do it properly it was going to have to be a complete strip down to a bare shell.

Dropped the engine and box - 

11559736876_3e280c3a94.jpg

note the location of the brake discs!

11559630794_0201db3873.jpg

started checking out the rust - this is all that remains of the top inner front guard

11559739346_538cbd7104.jpg

11559741913_87cef823fd.jpg

 

and rear lower guard,

11559637144_6150fdf363.jpg

caused by stupid placement of a foam support for rear window washer bottle

11559610285_819b901276.jpg

 

Silly Italians!

 

If it ever stops raining I will complete the strip out and update.

 

  • Like 1
Link to comment
Share on other sites

Sooo...

 

 

Completed the internal strip out - not good news. Minor rust in the floor and front of the back guard

 

11559755526_07cd24bfce.jpg

 

However this is the top of the both the B pillars

11642488405_b6efff6ae2.jpg

 

Looking at options now, maybe another roof if I can find a good one. Not sure yet

Link to comment
Share on other sites

  • 7 months later...

So I have decided to sell this thing as I will not get it done

 

 

TM Listing as follows http://www.trademe.co.nz/Browse/Listing.aspx?id=765294586

 

1984 Sprint QV 1500 (105hp), Alfasud mechanicals version, (Disk brakes all round) complete car with many spares - mostly stripped shell, a project I will not be able to complete. 

Good Points; 
Motor was fine when taken off the road - the car drove and handled well. 
Suspension bushes replaced all round 
New front brake rotors 
Reg is on hold. 

Bad things: 
Rust - inside front guards - floor 
Needs windscreen 

Many spare parts, spare engine, spare suspension, good doors. 

It is a rolling shell with the original telephone dial wheels - has been in dry storage for the last 3+ years all parts are there.
 
 
 
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...