Jump to content

Banter's TA61 Celica of swiss cheese and pure 80s style


Banter

Recommended Posts

Hello! This cancerous lump just landed in my driveway. Some of you may have seen it on trademe a week or two ago, I'm the sucker who ended up buying it.

Its a 1981 TA61 Celica GT Rally. The GT was the top of the range, GT Rally having the same 2T-GEU, IRS and LSD but with poverty spec accessories. Motor goes/splutters, will need a good tune up and a strip down at some point. A previous owner has taken out the factory LSD and put in a locked diff head which is a bit annoying. Replacing that will be the first thing on the list. Interior is pretty mint, just a few popped stiches on the driver's seat.

I'm actually really excited about this project. Its something that I can really get into, I will be trying to do the work by myself including metalwork and painting. Got a family friend who will lend me a welder and I have painting stuff from a previous project.

The plan is to get nice and tidy and add a few 80s touches like a digital dash etc. Will stick with the wheels for now cause they look alright and have decent tyres on them. Need to install some low.

Now to see what I've got myself into:
26231c3db76bba8a48e33495a82ba840_zpsd34b

6763bb6d485618cbc0a9ec503954b607_zpsa6af

6b690db714c85072c2d485b13aaa6afd_zpse858

f9bd61c6deb2d7a1334fadb0f1469768_zps83b9

ad7f3390dbe2c63d98355f693c0e2528_zps8cdd

b9ec07eecbae11c322dfb6e024607ed7_zps8681

9b409360a119a59c65272b72cc1a08de_zps26f1

8c8ae74b203c6df4c22833942ecc7d70_zps7ac7

Discussion: //oldschool.co.nz/index.php?/topic/38684-banters-ta61-celica-of-yesterdays-future/?p=1097251

Thanks for looking,
Andrew

  • Like 3
Link to comment
Share on other sites

New pictures! Alex (wo0kie) and I went to the wreckers at foxton to try to salvage some bits off an old MTE Celica XX. Didn't get much useable stuff but saw a few interesting cars there:

2nd gen Celica looking very sad
20130615_092400_zps1894b6a3.jpg

Lada which was in good nick, as far as we could tell it was complete minus the wheels
20130615_092157_zpsab0c492e.jpg

Starion
20130615_092240_zps5e6c84b5.jpg

Bedford (?) Ambulance
20130615_100533_zpsbcb620a9.jpg

Got home an continued the strip down
20130615_123456_zpsdf88482a.jpg
20130615_162030_zps32fee6db.jpg

Surprise bog/tape/paper rust fixes around the hinge panels/a pillars. Wooo will be fun to fix.
20130615_123505_zpsd0cce83a.jpg
20130615_123521_zpsfb79ecf9.jpg

Thats all for now, expect another update tomorrow.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

I had lots of photos but they've gone missing from my phone. Just been cutting out rust and stripping everything. The front windscreen came out great....

20130629_141644_zpsebd56e4f.jpg

Dammit. Might have something to do with the tools we were using. I'm worried a spare will be impossible to find.

Link to comment
Share on other sites

  • 3 months later...

This thing isn't dead! Daylight saving means I now have more time after work to work on it. I've bought a welder, slowly patching up holes. I've secured a replacement screen for the back too!

 

20131006_160132_zpsf9460fc1.jpg

 

As she sits right now:

 

20131006_160435_zpsfbacf0e7.jpg

 

20131006_160419_zps6772fa4f.jpg

 

I bought a gt4 torsen diff to replace the locked diff, pics from the tard. I measured the stub axle PCD which shouuuuld be the same (fingers x'd). Will ditch the housing, use stub axles (bigger dia) and swap the ring gear. Hopefully everything lines up. They're both T series........

 

275633300_zpsd2fcbb33.jpg

 

276220479_zpse7f75898.jpg

 

Also bought some electric fender mirrors, the connectors are there in the loom and I stole an in dash control from a supra, so hopefully everything just clips in? I will be painting them black to match the trim etc. Pic from trademe.

 

284651670_zpsf50411b4.jpg

 

Keen on some opinions on using an AW11 spoiler

 

31188820001_large_zps2854bd84.jpg

 

Yeah nah?? //oldschool.co.nz/index.php?/topic/38684-banters-ta61-celica-of-yesterdays-future/

  • Like 1
Link to comment
Share on other sites

I knew there was some damage in the firewall gutter so I had a look. I had previously pulled out a plate that was covering a bit of a hole. 

20131013_104627_zps4cc8a8bd.jpg

 

All gummed up with sealant around the fresh air shroud. 

20131013_105019_zps744483d4.jpg

 

Turns out there was very little solid metal holding it there

20131013_152919_zps2183d131.jpg

20131013_152850_zps42fb6f2f.jpg

 

Going to do the same on the other side to assess the situation. Probably the most awkward place to get into and do repairs. Hmm.

Link to comment
Share on other sites

  • 4 months later...

So I sorted this out a while ago and closed it up.

20131124_222505_zps9a032fff.jpg

 

The door jams are much healthier now.

Then:

20130615_123521_zpsfb79ecf9.jpg

Cut up:

20130623_123847_zpsa3c2b11f.jpg

Now:

20140222_164600_zps7543864e.jpg

 

20140315_125533_zps3003e4d1.jpg

 

20140316_200549_zps715e24f3.jpg

 

 I bought some fenders to replace my rusty ones, they're not proper Toyota ones but seem to fit well with a few tweaks. 

  • Like 5
Link to comment
Share on other sites

  • 4 months later...
  • 1 month later...

I'm planning on moving to Australia in the near future and I'm struggling to find time to work on this. If anyone's keen to take this off my hands please pm me, I'll be putting up in the classifieds when I get a chance.

 

Thanks,

 

Andrew

 

Now up: //oldschool.co.nz/index.php?/topic/45239-1981-toyota-celica-ta61-gt-rally-palmerston-north/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...