escortwags
-
Posts
785 -
Joined
-
Last visited
Posts posted by escortwags
-
-
HTC powder in a stainless tub with a burner under heat up to something like 60 degrees leave for couple hours. Then wash off with hose or water blaster if you have one
I have no burner to put under a tub but have a big arse sink and boiling water? where to you get that shiz from?
Have you tried dragons breath? I haven't personally but I know a few people who have that say it's the freaken tits.
Yeh seen that Dragons breath shit on wheels no idea about engine parts though
-
As per title
Keen to hear from experience, Ive got some new/old dirty R0tAz I want to clean up like new.soak/scrub/scotch - Whats the best product money can buy and where from to clean engine parts
Ive hooned carb cleaner on them but need something more aggressive
Thanksx
-
We are with classic haven't claimed but they are good to deal with and recently changed there policy wording so that
agreed value is agreed value and won't go to the books etc on it
and no km limit now either, think I'm paying 250 a year for 40k insurance
- 1
-
What a bearing looks like when it runs out of oil/oil pressure
Rotors gone, e shaft gone seals all gone, the rest looks O.K, such money wasting, such rotation
will take pick up the sump, theres some serious lumps of copper in there
- 1
-
And would that beautiful orange interior be for sale ?
binned/sold this stuff at least 6-7 years ago sorry dude haha
-
Delicious!
- 1
-
Same car?
Evolution of Myth?
LOL no, I've had the myth for 8 years now I got it in this nana state running the original piston motor, rust EVERYWHERE and and beautiful orange interior, was and still is a piece of shit
- 1
-
not sure, decided after one lap to run on .75 rotors
Haven't looked into it further than pulling plus and listening to it sour like a steam train
-
yeh Adrian toasted his car pretty good, I was right behind him when it happened (throttle linkage broke and jammed under the brake, wheel spinning top of 3rd no chance) Mates missies got taken to hospital on a stretcher but was just a case of whip lash after getting knocked out.
Then my boy Mookie who was in the back of that jumped in my bros 626 and he spun and just missed the wall. So now we have banned him from our cars hahahha
My cars a sack of shit I want to burn it so much myth
- 4
-
I'll bring the rx2 coupe... Just ran her at the classic trials... Managed a 1.26 around Hamptons...not quite strawbridge's 1.22... But getting there.
Good shit! would be keen to blat around the track with this thing, whats your setup like? with the changes we have made we should easily dip below the 1:20's now looking forward to Chrome in a few weeks to test it all out
-
made/got some bung moulds omade/hacked up/fibreglassed/bogged sanded then twenty years later these turned up
I only got flares so this thing wouldn't rub its nipples off on the track again, the inside lips of my rim are so fucked up from last time
-
- Popular Post
- Popular Post
Big booty bitches, 3 weeks till chrome and can't even put it on the floor yet hope it still starts LOL
- 17
-
plus 99% of rotaries are mounted all sorts of different weird ways in engine bays are are rarely ever the same. e.g. angles, gearbox combos, diffs rada rada rada
- 1
-
-
I to embarking on this mission tonight, will let you know how I go if it makes any difference haha.
My old hilux diff had this exact thing done so don't see any issue there -
will pass SR1600, only doing this as I know it can be done cheaply
-
pic of car cover?
- 1
-
Hi there pinners,
Anyone know the where abouts of a early/mid 80's hill diff? (need housing and axles)
The length I'm after is around 1430mm not fussed if longer or slightly shorter
Once complete ill be selling my shorted hillux thats 1260mm flange to flange if anyones keen? lets you run that big dish shiiiiiiiit LOL- 1
-
Thread hijack: speaking of Aliexpress rivnut guns, which of those has anyone brought that didn't break/worked mint?
-
hmmm no good, any for sale with an internal battery that could just be charged?
EDIT: This one says battery lasts for 1800 days?!?! whaaaa
-
Keen to know how much battery these things will suck, our car only gets driven every 2nd or 3rd weekend if the weather plays ball.
I don't like trickle chargers I've seen to many fires lately due to battery chargers going spazz -
Hey mate, Last I spoke to him, Mike at Mike Shaw Fibreglass Hamilton (MS fibreglass) said he had a mould for rx2 bonnet, (outer skin only, but could make bracing to suit) it would be perfect to get one made to glass up to your existing frame.
He also said he thought he had front guard moulds as well.
Hey bud already onto this!!!, he's making me one up as eek speak, might just ditch the whole frma e and run bonnet pins to stop this issue every happening again, was going to go carbon but a bit to expensey he does still have guard moods but will sort that at a later date when ride height castor etc. is locked in as a lot needs cutting from factory guards
- 1
-
Race 3 from the weekend (handicap) finally started getting used to the car, anyone know why Im getting a killer bounce mostly around the sweeper? is this from my 4 link binding up?
Also yes I know diff is getting changed to a 5.1 so I can actually use the power band and 4th gear
- 4
-
How fun was it fanging that thing around the track though man? Jealous.
Was MEGA FUN!!! just putting some go pro footage together now, will take 500years to upload but will put the link up once done!
Also managed to snap the speedo needle going over 120MPH, made a hell of a noise in the last few laps thought my gearbox had dropped a bearing
- 1
Best cleaning product for washing carbon/dirty arse engine parts
in General Car Chat
Posted
Cheers dude, found this video interesting, its the same yuck build up shit on the rotors at the moment thats not having a bar of carb cleaner and a scourer pad
American product though
Was thinking of thrashing some oven cleaner on them?