davidian

fuck thats rough

those steels do look choice, good luck!

thats all good, everything about the car is generally very bad anyways

much less of them now tho but still plenty around

Laughed when i saw 5 big adults packed in with luggage on the roof struggling around 80-90kmh on the highway in about 38degrees

keen to get late model bumpers maybe

yeah i think they can look quite nice/has potential. once you remove anything actually made by zastava underneath

viewtopic.php?f=17&p=921032#p921032

discushin

Lost what was left of my sanity and bought this:

will stick up more when I actually get it

EDIT: oh yeah discussion threddy

viewtopic.php?f=18&t=36264

there are some skyline calipers that take 30mm rotrs which might be a bit more available than the GTR ones.

Are they likey to fit 32mm disks or not so much?

from what i can see online pajero vented disks are 24-27mm thick

yea seems like once you get into the 30mm thick Subie range they were meant for larger disks around 330mm or so, still wont take 33mm thick

cheers, shall investigate this

Hoping someone can help here...

I have some brake disks with the specs below, need to find calipers that would suit the size and thickness. Something reasonably common/available would be preferable to going spendy aftermarket.

Yell out if you need more info, thanks

DIMENSIONS

DIAMETER = 295mm

HEIGHT = 66mm

THICKNESS = 32.9mm

MINIMUM = 30.9mm

CENTRE HOLE = 78mm

STUD = 5

PCD = 5.5"

We could buy from Pan Pacific here in Auckland at my last job, but wouldnt let us open an account unless we would spend 10K + a month (which we didn't)

my mate is a sparky with a PP account, no way do they put through that much per month.

I just got some number plate lights and bits form them for cashola

Talbot/Sunbeam?

whats your budget like?

most would say shorten a hilux diff but you might end up with different PCDs

welcome to my world.

is converting to rack an option? I mean youre already certing it..

Zastava AR 55

this

not so much

heres my parting shot

too easy lexus fanboy, i give up, let someone else go hehe

struggling car firm Spyker it would seem

Ive sent quite a few emails and phone calls to a couple of certifiers, as well as an engineer who does RHD conversions. Still haven't been able to get one to commit and come to look, so I'm kinda stuck. Bit anoyed about it TBH

I really need to sort the steering to go on with the project, finalise mountings for other things etc. so I can (hopefully) come back and rectify any B/S issues that might arise, later.

front hub diagram:

http://www.aziaavto.kz/images/niva/21214_M/6.jpg

yea well it would be nice if I could find one to come and have a look/chat, be it as it is I've gotta do a lot flying semi-blind

yeah sweet as, that's what Im thinking also.

Unfortunately it seems to be completely uncharted territory for what I'm doing and will just have to see how it turns out, Ill make an update on my project thread this weekend.

basically mounting a manual steering rack of another vehicle to my crossmember and possibly change tie rod ends to suit and seek advice about the universals setup from the likes of Autolign.