Jordan_L
-
Posts
88 -
Joined
-
Last visited
Posts posted by Jordan_L
-
-
- Popular Post
- Popular Post
Been struggling with the uploader on this forum for a while but seems to be working now - loads of updates since I last posted.
Top of the windscreen done, new inner arches sourced & painted for the front. Bottom of the back window fully replaced & chrome mounts remade. Back panel done apart from 1 light hole which is nearly finished... getting there slowly but surely
-
11
-
-
-
- Popular Post
- Popular Post
Finished the welding on the passenger rear quarter, still needs hammer/dolly work for previous damage, but all that will be done in one go as part of the paint prep.
-
15
-
- Popular Post
- Popular Post
Thats the rebuild complete... time to get back to the bodywork
-
11
-
- Popular Post
- Popular Post
As weeks go.. this has to be the most productive yet. Chassis rebuild done & got the body mounted too.
-
11
-
The rear axle is now completely finished (apart from Brakes which is a job for a later date).
Before and after video linked below:
https://www.instagram.com/tv/CZPr2DLpQg3/?utm_medium=copy_link
-
There or there abouts with the rear - the shocks/springs will be changed in the future, but I need the body back on/engine fitted etc to get the correct ride height, so it's not a concern for now that the shockers are no good & it sits high.
-
8
-
-
As well as powdercoating the chassis, they also did all the suspension bits. Made a start on bushes etc..
-
6
-
-
- Popular Post
- Popular Post
Chassis back from the blasters... time to get rebuilding!
-
15
-
- Popular Post
- Popular Post
Epoxied, seam sealed and Raptor'd underneath. Over the moon to have hit this milestone after so much welding!
-
19
-
2
-
- Popular Post
- Popular Post
-
13
-
The entire wheel well needed replacing, which ive done while being off work for christmas. glad to say there are now no other big areas of repair to be done underneath.
-
7
-
-
POR15 do a 3 piece set for cleaning/degreasing/sealing inside fuel tanks, not sure if it will be available where you are though? Im UK based..
-
- Popular Post
- Popular Post
Boot floor indent also added to the replaced section
-
10
-
I've neglected this thread, but not the car.. mainly been a case of more of the same, but we now have sills both sides etc
-
7
-
-
Busy couple of days getting the boot floor area done. A fair amount of guess work on this section as there was so much missing...
-
9
-
-
- Popular Post
- Popular Post
-
10
-
Bottom of the rear quarter is now done, apart from a couple of complex shapes on the arch, and fixing the rear quarter repairs which had huge amounts of filler
Probably going to switch back to welding underneath now for some variety...
-
7
-
-
- Popular Post
- Popular Post
Made a start on the rear quarter/rear arch - the arch has had me nervous for a while, pleased with how it's come out so far.
-
21
-
First of the inner sills done - had to go with functionality rather than a direct replica of the originals as there was just nothing left to use as a template.
-
7
-
-
- Popular Post
- Popular Post
Slow progress recently, but I have made a start on the sills. Now the outer is in place, i can make an inner & then button the outer up to the A pillar/rear arch
-
16
-
- Popular Post
- Popular Post
Slowly but surely...
-
12
-
Jordan's 1972 MS75 Crown Project - Discussion thread
in Project Discussion
Posted
Has anyone got one of these trim pieces for sale, for the right hand side? Mine has been lost during garage/house moves it seems. Happy to pay international postage etc.