Jump to content

mmmini

Members
  • Posts

    53
  • Joined

  • Last visited

Posts posted by mmmini

  1. So been a wee while since my last post. In that time I’ve built myself a pretty sweet man cave to house my toys- a 7x6m garage with a 5x6m carport on the front of it. With all that nice clean space to work in I’ve spent the last 6 months trying to get back to the OG Surf Blue.  
    Under the guards and floorpan are proving pretty easy to strip back as they were just painted without sanding and priming. the inside of the boot lid was pretty easy to strip back too. Unfortunately the rest of the body has two to three different British Racing greens to get through, plus a few coats of primer including some pretty thick dark blue/grey stuff which must be some sort of filler primer. Plus she’s also been resprayed in.a slightly darker surf blue. She’s still got all of her original panels however turns out she has had a fair bit of plastic surgery over the past 59 years. Have found quite a few repair patches so am ending up with a fair few bare patches. I know it’s not everyone’s cup of tea, and the purists are going to hate it, but I’m going to go with the patina/rat look.  I’ve still got a. It if work to do to strip off a few more layers in places however here’s a few areas where I’m just about finished. 

    IMG_3084.jpeg

    CC4B7F64-BD1B-4897-8127-3F2B1840EA37.jpeg

    159E804F-D4CD-4A37-99A3-328186DD0370.jpeg

    2129D9FA-11D3-48E5-B085-E7E7B5E3DE42.jpeg

    205D2D79-D4E3-496B-A654-348448A97817.jpeg

    • Like 5
  2. Hey yoeddynz, yeah I think they are either prelude or crx seats. They have been installed quite well and the last owner told me that they were WOF compliant however the wof guys at my local garage said they won't pass it until I replace them (or show them I have alternatives to fit). I have one good original seat but want to get myself a decent period drivers bucket seat for it so will replace the passenger seat to get through this WOF and then sort something out for the drivers seat.

    Yeah would like to respray in original blue however will be a while before I have the coinage for that so just going to make do with the brg - may look at getting some sort of old school 60's decals for it to try and make it look a bit better.

  3. Failed my wof due to a dodgy steering rack so ordered a new one from the UK, added a few wee shiny bits onto the order to make the shipping charge worthwhil, a bullet wing mirror to replace the horrible plastic mirror a previous owner had fitted, and a 13inch Motolita steering wheel which I’d been lusting after for a long time. Had to sell off a few parts that I had sitting around (1275 Cooper s head, and twin carbs) to raise the dough for it all. 

    2EBF8D03-7CD6-4F94-B4C8-E9A182E1C457.jpeg

    7A274798-94D8-4443-BCE5-899412127F59.jpeg

    • Like 2
  4. Cheers miniman. Yeah bit unsure about selling. Kinda swore I'd never sell her and figured I'd be buried with it however I don't use her as much as I'd like to and wouldn't mind a new project. Testing the waters on trademe though not much interest yet. Still got a few things to finish off yet so will post those up if/when I get them done.

  5. She's got adjustable Spax dampers all round however because she's running so low I was a bit concered that the dampers would get a bit stuffed so I've fitted Spax lowered dampers to the front, plus fitted lowered suspension front top mount - which is a higher mounting point for the damper - it's the black one in the photo vs the standard one which is red. So that gives a few extra inches of travel and should mean the dampers not getting compressed too much

    post-19645-0-40221800-1432528282_thumb.jpg

    post-19645-0-62940100-1432528597_thumb.jpg

    post-19645-0-33786600-1432528660_thumb.jpg

  6. I've fitted a Smiths Telemetrix electronic speedo and am in the throes of fitting an electronic speedo which is working out to be a bit of a pain to figure out what to take the speedo pickup off. Apparently you can take a pickup off the driveshaft bolts however I've got the later model pot joints so not sure what to do - I'm thinking I may just fit a hose clip onto one of the driveshafts and pint the pickup at that.

    post-19645-0-47566000-1432528102_thumb.jpg

    post-19645-0-09475300-1432528149_thumb.jpg

    • Like 1
×
×
  • Create New...