Antonio enmkekel

how to turn on lambretta nsu prima dynamo

On 29/06/2012 at 05:40, mikey said:

The seam sealer failed at sealing the tank. But JB weld worked a treat. Yay.

On to the next leaky thing! I replaced the Bing carb with a Dellorto PHBG. Which is frrcken sweet compared to the leaky old one.



Made up some new cables for the choke/throttle. Did a skid!!! Nah! Not really, this thing is the opposite of skids.

But words can't describe how good it feels to have a scooter that doesn't leak two-stroke everywhere I park it! Ha ha.

This is the dynamo controller/regulator I hooked up



Also has new coil (thanks 10speed) and new battery.

Next things on the list is new tire and fashion some hold down springs for the front brakes. It's a gamble every time I use the front brakes at the moment; one in five times the shoes wont be parallel with the drum and the front wheel locks up, and front springs bottom-out and go BANG!!. It's a terrifyingly exciting senario...

This is the other thing I'm working on. Digital ignition with programmable advance. I'm using a BIP373 ignition driver, PIC16F628 micro and hall-effect sensor. I've _almost_ got it working! I've been battling to fire the coil without destroying transistors/micros. This is about the 4th revision of the ignition circuit. Anyhoo, shouldn't be too far off I reckon!





Main motivation for this is because points for this thing are impossible to get these days and my current ones are super fucked. It's rideable (I rode it to work today) but you can tell the timing is all over the show!

Hallo, can you help me please, 

how to turn on lambretta nsu prima dynamo