zuko Posted February 5, 2025 Posted February 5, 2025 Hey Lads Bought this AX100 off a mate who moved to Oz a few months ago and have slowly been chipping away at restoring it and turning it into a sweet lil 2 smoke street tracker, Not in bad nick considering its been sitting for over 2 decades, Rego is well dead but the end goal is to get her back on the road Tank was full of rust and holes so it had to go, Came across this aftermarket Yamaha style tank on trade me for cheap and scooped it up , will need minimal work to get it to fit properly. Its slimmed the bike down visually and is perfect for the street tracker look I'm after The factory Seat and tail cowl were never going to work for the look i want, So i cut the middle out of the rear tail section and then leaned the 2 halves together and filled the remaining void with expanding foam and shaved it down to get the basic shape I'm after, Once this is glassed and bogged i will use this to make a mold and make the final product from fiberglass (Trying to avoid this for as long as i can, F**k fiberglass!) Have pulled the motor out and is in pretty good shape but could do with a new Top end, have bought 2 new cylinder kits from AliExpress (literally the only place i can find one) and they have both be less than desirable, Will make a post with pictures of the cylinders once i get a chance and get your guys opinion on them 5 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.