kws Posted June 7, 2022 Author Share Posted June 7, 2022 6 hours ago, shrike said: So are you going to make a claim via the Contract and Commercial Law Act 2017? Sounds like the guy is just scum and took advantage of the current car market, highly doubt anyone in the UK would have paid what he was saying he could get etc if they would surely he would have already jumped on it Certainly considered it, but its not really worth my time. Im sure i'd have a solid case though. Im not sure having to drag it out further would be any good for my mental health. Prices in the Uk are all over the show, but if it was as good as it had been described it would have got some decent coin over there (albeit as you say, not what he was aiming for) but anyone that imported it would have been bitterly disappointed at its condition (more so than me, at least i only transported it across the island, not across the world). @Muncie Are there any issues with whacking new lifters in on an old cam? I'd be surprised if the cam was any good, since I have zero idea how many miles are actually on this engine, but it might be worth a crack. I've also been told to try slipping a feeler gauge between the rocker and valve with the engine running and seeing which one has more play, indicating a lifter that hasnt pumped up. Im really hoping it just goes away by its self as I dont want to waste money on this engine. Quote Link to comment Share on other sites More sharing options...
cletus Posted June 7, 2022 Share Posted June 7, 2022 7 Quote Link to comment Share on other sites More sharing options...
Otodat Posted June 7, 2022 Share Posted June 7, 2022 Car looks awesome in those pictures you took, can see the appeal. 2 Quote Link to comment Share on other sites More sharing options...
kws Posted June 7, 2022 Author Share Posted June 7, 2022 8 minutes ago, cletus said: Ive dumped a can of the Mitsubishi engine treatment into it, which is more or less the same as Proma. Works really well on mitsis and subarus, but hasnt done jack to the Rover yet. 1 Quote Link to comment Share on other sites More sharing options...
kws Posted June 7, 2022 Author Share Posted June 7, 2022 10 minutes ago, Otodat said: Car looks awesome in those pictures you took, can see the appeal. Thanks. Now picture it slightly lower, cleaner, with the correct fog lights, center caps and Vitesse rear spoiler... #goals. 1 1 Quote Link to comment Share on other sites More sharing options...
Muncie Posted June 7, 2022 Share Posted June 7, 2022 If the cam isn't chewed up new lifters should work fine. I'm no expert it did work on mine though with no ill effects. Heaps of assembly lube and did a cam run in process on mine just to give it best chance. 2 Quote Link to comment Share on other sites More sharing options...
Otodat Posted June 8, 2022 Share Posted June 8, 2022 https://www.facebook.com/groups/NZ.Range.Rovers/permalink/2062515183936077/ In your area $700 running 3.9 Quote Link to comment Share on other sites More sharing options...
Otodat Posted June 8, 2022 Share Posted June 8, 2022 21 hours ago, kws said: Thanks. Now picture it dumped on its ass, pulsing with a 13b bridgeport, cleaner, with the correct fog lights, center caps and Vitesse rear spoiler... #goals. Sick! 2 2 1 Quote Link to comment Share on other sites More sharing options...
kws Posted June 8, 2022 Author Share Posted June 8, 2022 2 minutes ago, Otodat said: https://www.facebook.com/groups/NZ.Range.Rovers/permalink/2062515183936077/ In your area $700 running 3.9 Already contacted them, pending sale to someone else already 3 Quote Link to comment Share on other sites More sharing options...
kirk28 Posted June 11, 2022 Share Posted June 11, 2022 https://www.trademe.co.nz/a/motors/cars/rover/other/listing/3626362137 Quote Link to comment Share on other sites More sharing options...
kws Posted June 11, 2022 Author Share Posted June 11, 2022 Just now, kirk28 said: https://www.trademe.co.nz/a/motors/cars/rover/other/listing/3626362137 It'll never sell for that money, especially after being butchered with gross interior and carb. It used to be a nice standard Vitesse; I have photos of it from a few years ago when he failed to sell it then. 4 Quote Link to comment Share on other sites More sharing options...
kirk28 Posted June 18, 2022 Share Posted June 18, 2022 Just posting this cos this interior looks lush af. 4 Quote Link to comment Share on other sites More sharing options...
kws Posted June 18, 2022 Author Share Posted June 18, 2022 What about one with tweed seats? 5 Quote Link to comment Share on other sites More sharing options...
kirk28 Posted June 18, 2022 Share Posted June 18, 2022 9 minutes ago, kws said: What about one with tweed seats? Ya need to wear this jacket to drive that one, with matching cap and smoking some Peter Stuyvesants . 6 Quote Link to comment Share on other sites More sharing options...
igor Posted June 18, 2022 Share Posted June 18, 2022 Wouldn't a man who dresses like that be more likely to smoke a pipe? 2 Quote Link to comment Share on other sites More sharing options...
Otodat Posted June 28, 2022 Share Posted June 28, 2022 https://www.trademe.co.nz/3659017977 2 Quote Link to comment Share on other sites More sharing options...
locost_bryan Posted June 28, 2022 Share Posted June 28, 2022 On 18/06/2022 at 21:43, igor said: Wouldn't a man who dresses like that be more likely to smoke a pipe? Quote Link to comment Share on other sites More sharing options...
locost_bryan Posted June 28, 2022 Share Posted June 28, 2022 On 18/06/2022 at 21:39, kirk28 said: Ya need to wear this jacket to drive that one, with matching cap and smoking some Peter Stuyvesants . Isn't tweed more of a Landrover thing? Quote Link to comment Share on other sites More sharing options...
kws Posted June 28, 2022 Author Share Posted June 28, 2022 No 3.9 or 4.6 has magically come up for sale locally, which sucks and all the good engines are either crazy money or miles away (like the one above). On the plus side, the previous owner is apparently shipping down a crate with the original engine in it, or something that might resemble parts of the original engine. Not sure what I will end up with yet, we will see. If there is enough to rebuild, and its not completely ruined, that might become the plan. 6 Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted June 28, 2022 Share Posted June 28, 2022 10 hours ago, kws said: or miles away (like the one above) In sure that the oldschool freight service might be able to help. It seems to be a totally fair price for a sub 200k engine eh? (with apparently no issues..... Hmmmm) 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.