Sign in to follow this  
Kimjon

Kimjon's 50cc (then later ... 150cc) of awesomeness!

Recommended Posts

Looking at it, I think it may even have electric start? As in push a button and a starter motor turns it over? This could be a bit exciting if I'm right?

  • Like 1

Share this post


Link to post
Share on other sites

It’ll likely be an early AF05 engine, non variable cvt type drive. Did come with electric start. Same/similar to Nifty 50 and Eve models. 

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
Just now, Raizer said:

12v, BTX4L battery should be the go.

Awesome! Google searching it straight away thanks.

Share this post


Link to post
Share on other sites

I hooked up a 12v battery, starter turns over. It doesn't fully crank like I'd expect...but the battery I used was very small (alarm battery that's old). So i think it's good news, at least it turns over.

  • Like 1

Share this post


Link to post
Share on other sites

So, I got curious and pulled it apart. Freeing up the vanishing that was sticking the diaphragm to the valve inlet. Blew some air through it backwards and performed some other witchcraft and then tested it by sucking on the hose until fuel came gushing out. I got the idea from something I recently watched on pornhub.com 

Then started her up first kick with engine start and it fired into life for the first time in about a decade?

Fuck yeah...its awesome! Each ride gets better as it blows out the cobwebs...

  • Like 4

Share this post


Link to post
Share on other sites

Anyone know what this is?

Resized_20200626_080203.jpeg.badb3503cf39ac724e7bb06b4800e0b9.jpeg

It's just hanging there on its own. Looks like it plugged into a filter or something? Not sure what it is or does?

Share this post


Link to post
Share on other sites

Plates on.

Passola was easy, but the Honda was a fuck around because it had no rear end left. Someone must have back flipped it?

Resized_20200626_142654.jpeg.d661ce10ed1f3f68453220709e3c9f36.jpeg

So 

Resized_20200626_150633.jpeg.410c38188b46d397bae1ad70d3c22e48.jpeg

Resized_20200626_150751.jpeg.23510585995044cf470319d5dd02a4a4.jpeg

Milling action shots.

Resized_20200626_152419.jpeg.dcd59f5a4b939b6c9ce97a89bb48d85c.jpeg

Resized_20200626_161902.jpeg.2899400eb11518823d803a39f48d50d0.jpeg

Resized_20200626_161910.jpeg.5fc5252f46b28d5a200cf5d44baba1c2.jpeg

Cheap trademe indicators adapted to fit.

Resized_20200626_184110.jpeg.c48b4cbf9e8e8ca5bff52697683369fe.jpeg

Boom! Job done...

 

  • Like 3

Share this post


Link to post
Share on other sites

And putting it to good use:

425116696_Screenshot_20200626-104049_VideoPlayer.thumb.jpg.71ec9c55c6cddca144907418acbbca48.jpg

My neighbours think I'm mentally retarded. But its me who feels sorry for them, as they have to use their legs to walk their wheelie bin 100m down the driveway.

  • Like 3
  • Haha 1

Share this post


Link to post
Share on other sites

20200627_095303.thumb.jpg.0ba0bafe3d8d0b82741d3682b360eeb3.jpg

Got a battery for the Honda. Indicators front and rear, horn, starter motor, stop lights for both front and rear brake levers all good. Headlight has been replaced but is unknown as runs off motor and its raining so don't want to go outside. But it's all looking good...yus!

So hopefully that's all the electric stuff sorted on both scooters now. So all fully legit.

Share this post


Link to post
Share on other sites

The passola was twice as loud as the Honda. I did up the head bolts with no improvement. Then realised that the header pipe wasn't even connected to the muffler.

Resized_20200627_122400(1).jpeg.f19b0d370ff866839fb114d1cded8811.jpeg

So a school chair from the dump lost a leg to save my ears...

It was a struggle to weld the paper thin metal with 40 years of 2 stroke oil impregnated into it...but got there in the end.

Resized_20200627_122412.jpeg.481c89930adef308a01cd9490a03a956.jpeg

Resized_20200627_130055.jpeg.361f3c9502fd2423ecc4b2e1f9a4148e.jpeg

All done.

Resized_20200627_130101.jpeg.286b9288fa933d5b45e5b3fb400a4444.jpeg

And then the final touch...working headlight...yus!!!

Resized_20200627_130822.jpeg.9ad21bb1d4d7de5552fa85492055da7d.jpeg

So sexy!

Resized_20200627_130110.jpeg

  • Like 2

Share this post


Link to post
Share on other sites

A quick look around the $2-shop for something suitable and this popped up.

Resized_20200628_121836.jpeg.f1cd75afe4dcf0be9a1e920bbcb0f513.jpeg

Yip, I can work with this...snip, snip, snip...

Resized_20200628_123851.jpeg.60da5b71cd2837516c14d8531978709c.jpeg

Tadah...

  • Like 5
  • Thanks 1

Share this post


Link to post
Share on other sites

Both scooters had big chips out of the front fenders. So I bobbed the fenders back an inch, just to tidy them up.

Passola:

Resized_Screenshot_20200628-144140_Gallery.thumb.jpeg.bee6910f89cd11464f2d702a99176282.jpegBefore

Resized_20200628_144120.jpeg.adc4a719d9c4f246603e96c696b10751.jpegAfter.

Honda:

Resized_Screenshot_20200628-144058_Gallery.thumb.jpeg.ff4c52c7777870b9a8d24ad056d11539.jpegBefore

Resized_20200628_144116.jpeg.30a5cd1223d67a44fe76246ff8051bfe.jpegAfter

Then I made up a cover plate to hide the ugly on the passola, as my wind shield was rooted!

Resized_20200628_161313.jpeg.3ecfb62eabb07aee28018a6d39c84a65.jpeg

This is an offcut from a garage door slide.

Resized_20200628_160246.jpeg.3d4a746af52ad5bd98d4d3564fdbc99f.jpeg

A fair bit of time went into this. It's still a bit agricultural looking, but it's good enough.

Resized_20200628_160637.jpeg.1325c14a6674b577e36b4cb3f4ed82bb.jpeg

Overall it serves its purpose, so I'm happy enough with the end result.

 

  • Like 4

Share this post


Link to post
Share on other sites

20200701_102034.thumb.jpg.46d556f7c5e8e6262b065f04b28a262f.jpg

I'm calling it done; nothing says finished quite like mismatching grey paint and a pin-up girl decal.

 

 

  • Like 3

Share this post


Link to post
Share on other sites

So, trademe strikes again. A classic case of "expectations V reality". But in the totally misrepresented the goods kind of way.

I've never done the Tinder thing, but I imagine this is a common experience when you are fizzing about a girl who swiped right on you...then you meet her and realise her photos are 20 years old, prior to having vaginal birthed triplets, becoming an alcoholic, developing a lazy eye and putting on 40kg.

That was my day. I woke fizzing about a trademe purchase (the expansion chamber off this scooter) a few nights before, that I was about to collect. I paid him by direct credit as he wasn't going to be there. These are the photos off his add (my internal thoughts are saying ...exciting...looks brand new...fuck yeah...soooo cool, scooters, FTW, score!!!).

Resized_Screenshot_20200702-122337_Samsung_Internet.jpeg.ce7816a5dd55fe2af89e34c607f00cfa.jpeg

Resized_Screenshot_20200702-122343_Samsung_Internet.jpeg.b6ea6575bcda67495112fbbf59e82956.jpeg

Took a day off work to drive 2.5hrs (each way) to go collect it. Then found this left out for me to collect:

Resized_20200702_104254(1).jpeg.7d5876703fa34de32c1602182f4bf7e8.jpeg

Resized_20200702_104250(1).jpeg.6b0be0cc3a94a64c7114188718e9d134.jpeg

Womp womp...bubble burst.

But just like that rotten pog that tricks you on Tinder to swipe right with her photos from 1995... you still end up fucking her anyway, just because you're kind of there already. And so, me and this exhaust ended up going home together too.

  • Confused 1
  • Sad 2

Share this post


Link to post
Share on other sites

20200703_102103.thumb.jpg.a9ca1d1b0853b49661486be5f66d654a.jpg

I fair bit of time later...got it looking presentable. I'll probably paint it, but undecided at this stage.

I'm still not sure if I'll use it on these motors, or get a more modern engine and transplant it into the passola. No rush to make that decision 

Share this post


Link to post
Share on other sites

And I picked up this pipe that potentially I could modify to work. It's off a yz80, so would need a little volume cut out of it, but that's nothing I haven't already done before.

I'm reluctant to tear down these motors and port them, as I doubt that parts are available anymore. Any Google searching for stuff ends nowhere, so I'd be making a lot of work for myself if I did do this.

Resized_20200703_110541.jpeg.ecd408cdf428eff96ec7dfd4cb51e5f2.jpeg

I did have other plans for this. But yeah/nah possibilities are good to think about.

Share this post


Link to post
Share on other sites

The Honda didn't have front brakes, or a working speedometer.

Resized_20200704_102123.jpeg.a4556d83a2ecd08800b4a741f6e7838c.jpeg

So I ordered some cheap crap off trademe. The cheapest parts I could find, as none of the scooter places I tried could find me parts for a 1982 Honda Tact. Or nifty50, or spree...or be much help at all. I didn't cast a wide net...but soon got the impression I was on my own with this one.

Resized_20200704_105311.jpeg.06673759b6bd2970047e5890d864d5c9.jpeg

I modified the original cable end.

Resized_20200704_105742.jpeg.d7ee0d9a283c7419cc9cefb5644c7f37.jpeg

Then joined it to the "new" cable. Two layers of heat shrink hold it inline for installation purposes. Once tension is on it, this will hold itself together.

Resized_20200704_112206.jpeg.716b53f6cabd9cfe3bcfce23a4a961cf.jpeg

I machined this up to go on the end of the cable, to take the place if the soldered fitting that should be there.

Resized_20200704_112251.jpeg.a32f0d0eed52aa48d484dd566315165d.jpeg

Like this.

Resized_20200704_120030.jpeg.f1f232afa92a170d55631bc0e9322758.jpeg

Then using a old bicycle brake cable clamp, tightened it all up. Not pictured is me double downing on this...I put two on for safety reasons. Totally unnecessary, but cheap insurance. Also if I ever sold it, I'd hate for this part to fail with a teenager girl riding it down a hill in Wellington or something like that, so I made sure its solid.

Then onto the speedo. By now my frustration levels were beyond taking photos as you go, these are fiddly fuckers at the best of times...but you're going to have to take my word for it, everything now works as it should. The replacement cable I brought on a gamble worked, and after stripping and cleaning the shit out of the mechanics of it...it worked.

So after 3 hours, everything that should go, does go. Horn, headlight, brake lights on both handles, front and rear brakes work, indicators front and rear, oh and I even cleared the Mason bee hoop out of the fuel gauge dial and that works now too. Pretty stoked.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this