nzstato Posted August 11, 2021 Share Posted August 11, 2021 Choice, another trick is to mix dry ice in Acetone. The dry ice will sublime and leave the acetone at -78, not as cold as liquid N2 but with a higher head capacity it will suck the warmth out of anything.... extremely dangerous so only under adult supervision kids... 2 Quote Link to comment Share on other sites More sharing options...
NickJ Posted August 12, 2021 Author Share Posted August 12, 2021 8 hours ago, nzstato said: Choice, another trick is to mix dry ice in Acetone. The dry ice will sublime and leave the acetone at -78, not as cold as liquid N2 but with a higher head capacity it will suck the warmth out of anything.... extremely dangerous so only under adult supervision kids... Acetone is likely the better choice, I was nervous the Leidenfrost effect would make LN2 ineffective as it prevents serious liquid cooling of anything at room temp if you can't fully submerse it. The way it worked so well I actually wonder if a bag of frozen peas would have been just as good! 2 Quote Link to comment Share on other sites More sharing options...
Mof Posted October 24, 2021 Share Posted October 24, 2021 @NickJ Mig argoshield? Come get my bottle. My welder is broken and fucked if I'm taking it back near full. 1 Quote Link to comment Share on other sites More sharing options...
JustHarry Posted October 24, 2021 Share Posted October 24, 2021 Flash I just use c02 at home .....so much cheaper haha and really no differnt to weld with.. 2 Quote Link to comment Share on other sites More sharing options...
NickJ Posted October 24, 2021 Author Share Posted October 24, 2021 1 hour ago, Mof said: @NickJ Mig argoshield? Come get my bottle. My welder is broken and fucked if I'm taking it back near full. Yep, Coregas Argoshield..... Buy from Bunnings..... open on the weekend they said....... I'm hoping I can get a bottle from Blackwoods when they open on Tuesday, but if you've got a bottle i'll happily empty it for you Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted October 24, 2021 Share Posted October 24, 2021 Co2 for me. Works fine. Its all about how you stick your tongue out when welding. Quote Link to comment Share on other sites More sharing options...
NickJ Posted October 24, 2021 Author Share Posted October 24, 2021 59 minutes ago, yoeddynz said: Co2 for me. Works fine. Its all about how you stick your tongue out when welding. I'm already reliant on sticking my tongue out to direct the bead, adding another variable might end up with slag on my favourite welding jandals! Due to some seriously questionable life choices, getting to the CO2 outlets during 'normal business hours' doesn't work for me, hence i'm stuck with a top shelf product from a rock bottom supplier. 2 Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted October 24, 2021 Share Posted October 24, 2021 1 hour ago, NickJ said: Due to some seriously questionable life choices, Dont be hard on yourself for you are supplying the worlds gardeners some of the finest wheelbarrows ever made. Be proud of that. Quote Link to comment Share on other sites More sharing options...
nzstato Posted November 15, 2021 Share Posted November 15, 2021 If you haven't seen it already, check out this channel on various tips to dress your panel up nice. 1 Quote Link to comment Share on other sites More sharing options...
Nominal Posted November 15, 2021 Share Posted November 15, 2021 On shrinker/stretcher I've had this one for yonks, just switch the jaws over. Have had it bolted to the bench but changed to a vice mount with a chunk of angle. Seems to work fine for flanges etc. I do use a longer handle than it came with. A stand one with a foot pedal would be 'better' but this works for me. 1 Quote Link to comment Share on other sites More sharing options...
nzstato Posted November 15, 2021 Share Posted November 15, 2021 ^I have a pair of them and made foot operated with some scrap steel. Works a treat. Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted November 15, 2021 Share Posted November 15, 2021 Yeah ditto having a pair of them if you can afford it. Mine are on a stand so I can wheel them around the workshop closer to the job which saves time if using them heaps. 1 Quote Link to comment Share on other sites More sharing options...
Benno Posted November 15, 2021 Share Posted November 15, 2021 I've got a cheap vice mounted stretcher/shrinker. Happy enough with it, did the trick for what I needed it for. I used a jack handle on it to make things a bit easier. You're welcome to borrow mine for a bit if you want to see how well it works for you before you buy one. 1 Quote Link to comment Share on other sites More sharing options...
NickJ Posted November 16, 2021 Author Share Posted November 16, 2021 On 15/11/2021 at 20:15, nzstato said: If you haven't seen it already, check out this channel on various tips to dress your panel up nice. Cheers! Plenty of relevant info in there, really need to get off my butt and make a slapping implement, paddle? So many gems in his videos, just difficult how long they are, he's at Bob Ross levels of calmness! On 15/11/2021 at 20:26, Nominal said: On shrinker/stretcher I've had this one for yonks, just switch the jaws over. Have had it bolted to the bench but changed to a vice mount with a chunk of angle. Seems to work fine for flanges etc. I do use a longer handle than it came with. A stand one with a foot pedal would be 'better' but this works for me. Thats the exact type i've been looking at, but is something like this with more bite, oval jaws and a pedal worth the extra coin? https://www.machineryhouse.co.nz/S2264 9 hours ago, Benno said: I've got a cheap vice mounted stretcher/shrinker. Happy enough with it, did the trick for what I needed it for. I used a jack handle on it to make things a bit easier. You're welcome to borrow mine for a bit if you want to see how well it works for you before you buy one. Hmm, thats a good offer! i'm a week or two from really needing them, i'll reach out for sure if I can't decide, thank you! Quote Link to comment Share on other sites More sharing options...
nzstato Posted November 16, 2021 Share Posted November 16, 2021 The deep throat shrinkers do have some extra capacity in hard to reach spots. Depends on the price difference? I need to make a decent slapper too, but you can get buy by bending up a worn out bastard file - leaves some little marks so you can follow where you are. Quote Link to comment Share on other sites More sharing options...
tortron Posted November 16, 2021 Share Posted November 16, 2021 heres me slapping 1 Quote Link to comment Share on other sites More sharing options...
Nominal Posted November 16, 2021 Share Posted November 16, 2021 44 minutes ago, NickJ said: Cheers! Plenty of relevant info in there, really need to get off my butt and make a slapping implement, paddle? So many gems in his videos, just difficult how long they are, he's at Bob Ross levels of calmness! Thats the exact type i've been looking at, but is something like this with more bite, oval jaws and a pedal worth the extra coin? https://www.machineryhouse.co.nz/S2264 Hmm, thats a good offer! i'm a week or two from really needing them, i'll reach out for sure if I can't decide, thank you! The small ones are fine for making curved flanges, just depends on what you need it for. 1 Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted March 4, 2022 Share Posted March 4, 2022 "Aaaaaaand OCD enters the room" Lol 1 Quote Link to comment Share on other sites More sharing options...
NickJ Posted March 4, 2022 Author Share Posted March 4, 2022 11 hours ago, yoeddynz said: "Aaaaaaand OCD enters the room" Lol Seems to be the flavour of the build, "Just 5 more minutes" Quote Link to comment Share on other sites More sharing options...
yoeddynz Posted March 4, 2022 Share Posted March 4, 2022 I'm totally with you on that. Until it comes to prep and paint time. That's when I'm all "fuck this, I'm bored now, that'll do.." 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.