Popular Post Jeffs_Emporium Posted August 15, 2022 Author Popular Post Share Posted August 15, 2022 Highly illegal spec does look good though right?? 35 5 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted August 31, 2022 Author Share Posted August 31, 2022 Decided it was a good time to remedy this heinous bracket for early light swap and try get them on the new cert next week i didnt have any other support other than pictured so it was deemed to floppy last time 2 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted August 31, 2022 Author Share Posted August 31, 2022 I have some spare buckets that meant I could make them pretty easily without pulling front off the car 3 Quote Link to comment Share on other sites More sharing options...
Popular Post Jeffs_Emporium Posted August 31, 2022 Author Popular Post Share Posted August 31, 2022 Much more discreet 10 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted August 31, 2022 Author Share Posted August 31, 2022 Additional support in the top outer corners 3 Quote Link to comment Share on other sites More sharing options...
Popular Post Jeffs_Emporium Posted August 31, 2022 Author Popular Post Share Posted August 31, 2022 Other jobs for cert prep Green lane speed shop made up a cold start injector fuel line that replaced the janky barb fittings and crusty 30 something year old hose the supercharger kit came with. I also added the correct size fitting to fuel pump inlet so the tank hose could slip on further than 5mm. Replaced diff bush while I was groveling on the ground and lifted rear back up to get camber back in spec. 11 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted September 1, 2022 Author Share Posted September 1, 2022 Last on the list (that im aware of) was this water leak coming from the back of head. Most 1gge owners have issues with gasket sealing here so this was infuriating to see the gasket was in perfect condition and I was unable to remove it in one peice to transfer to the spare outlet. I made up a paper gasket for the spare and it's held up so far so fingers crossed. 6 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted December 26, 2022 Author Share Posted December 26, 2022 Made it through it's second certification relatively easy other than admin time. Missed a couple events I had planned to take it to but still went to the os drags. Best time was this 16.780. Before supercharger kit was 19.8 Was interested to beat a stock gz20 with a 1ggte Had one sketchy moment where a hose popped off the back of the head at the top end of third gear and the back stepped out but it corrected after I buttoned off. Put hose back on and tightened clamp and it was fine. 7 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Jeffs_Emporium Posted May 28, 2023 Author Popular Post Share Posted May 28, 2023 Some more serious parts for the build 14 1 1 Quote Link to comment Share on other sites More sharing options...
Jeffs_Emporium Posted March 17 Author Share Posted March 17 Did some more suspension fettling @Snoozin put it in print via nzpc Now looking to sell and onto the next one in garage! Would like 35k on the tomcats 25k on CHEVIOT TURBOS 8 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.