Popular Post Seedy Al Posted September 25, 2018 Popular Post Share Posted September 25, 2018 So, I have decided I should probably make more of an effort to show you guys what goes on in my retarded life of old cars and broken crap. Instead of making threads for everything, I'm just going to roll this thread with updates on whats going on. Pretty much Like @cletus, because he is cool. So you will see build threads on cars, scooters, push bikes and whatever else is going on. I don't have facebook, and because I long and hold the opinions of other people so highly, this is happening So lets go, Seedy Al From Seedy Al's Chop Shop 19 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Seedy Al Posted September 25, 2018 Author Popular Post Share Posted September 25, 2018 First Up is My Hilux I have been campaigning for a while. Long Story short it was super Barry Farmer spec and stayed that way for some time. Then I parked it @Goats place for like 8 months while I did other things, and needed a bunch of stuff to get back on the road, which spurred me into Making it into the shop truck it is now. This thing was just getting ready to be for sale, and then Struck a case of Diesel run away on me from a down a hill, which was fucking pretty hard on the nerves. So I have decided I dont want to kill anyone, so its getting pulled down for a re-ring and head over hall to sort all the blow by and smoking issues. So anyway, heres a bunch of useless pics of the evolution of the Hilux 13 Quote Link to comment Share on other sites More sharing options...
Popular Post Seedy Al Posted September 25, 2018 Author Popular Post Share Posted September 25, 2018 as been mentioned a few times, Huge thanks to @Archetype for helping me out with the sign writing. Was achieved by making a low tack stencil and then applying plasti dip, to give it a more realistic and weathered look. 24 Quote Link to comment Share on other sites More sharing options...
Popular Post Seedy Al Posted September 25, 2018 Author Popular Post Share Posted September 25, 2018 I also have a bunch of push bikes, but they are fairly mundane And also Scooters!!!!!!!!! I own 4 scooters 2 C-50's, one fairly OG, for now, which I bought off @Chris.QCR long time ago and have only used one lol, and the other I bought as a going concern with a skyteam 125 in it. The OG one is going to get a 110 motor in it for summer rides, and the Skyteam one will get built into something better as its current style is not my style. And have a Honda Eve with a Dio motor I got off @RUNAMUCK And a Honda Nifty Fifty thats going to also get a Dio motor, along with a bunch off stuff I have bought off @Raizer Anyway thats it for now. Hilux repair is my current concern so scooters are just back burner stuff till thats done, 20 Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted September 26, 2018 Author Share Posted September 26, 2018 continuing on from the scooter talk. In the pictures below you can make out the Honda Pax on the back of the hilux, I have been rolling this for a few weekend rides, seems pretty reliable with the Dio motor in it. Cant wait for more sun hours and will ride this to work which isnt to far away. Does good Job And the others are of My nifty I just received on Monday, after being stored in Auckland for some time. It matches everything I own, ratty and rad. Cant wait to eventually get into it. Currently waiting for the key to turn up so I can actually start the thing, then rego and it can be a fun little smoko runner or something, 7 Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted September 26, 2018 Author Share Posted September 26, 2018 And That besides, I have been campaigning on my Hilux pulling apart the motor. Really want to get the head off so I can see what the shit I'm dealing with. Have been so obsessed with trying to get the crank pulley bolt off, that I completely didnt even consider that the Pulley wont come off. Sigh, will try dig out a puller at work tomorrow and then try again, worst case I will be making one which is mega dumb. In the good news, I am super stoked it has adjustable tappets lol, as that means its one less thing I need to try and do slash pay someone to sort. lovely. 8 Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted September 30, 2018 Author Share Posted September 30, 2018 Well now, After a bunch of fluffing around with people trying to actually Buy a new puller as works ones were missing a bunch of bits etc. I finally got the front crank pulley off Much Excitement! Then the head removal was a piece of cake from there. However, after inspecting the head for any sort of damage and concluding the head looks lash as shit, I moved on to the block WOH woouup. Shits fucked. The step on the bores is fucking massive, and the bores look like they have been polished by a professional No wonder this thing had some blow by. So, my dreams of a simple Re-ring and valve stem seal job are down the drain, along with my hopes and dreams of getting most of my cars sorted this year to buy a house. Lets just say I'm a little bit dark today... Anyway, next step is to figure out what I'm going to do about this thing and the rest of my life lol. So, it will get strung back together enough so it can be pushed, and will start thinking of options. These probably range from, Doing a full re-build on this motor, which seems like a total waste of money or time, Finding some form of replacement motor, Fitting the 1kz setup I have kicking around, Fitting the 1UZ setup I have been saving for my Cressida Or Even fitting the 3rz Setup that @Bistro has sitting at my lock up. Anyway, stayed tuned for the Next Installment! Where I find out if Niki's Slash @Mourning Cupcake s Daily Mazda needs a new LH rear caliper ora rebuild as I noticed its leaking brake fluid On Friday! FML lol 4 1 5 Quote Link to comment Share on other sites More sharing options...
Big Value Buddy Posted September 30, 2018 Share Posted September 30, 2018 2 hours ago, Seedy Al said: Lets just say I'm a little bit dark today.. Hugs to you my friend. You should come to Watermark one night and say hi. 2 Quote Link to comment Share on other sites More sharing options...
yetchh Posted September 30, 2018 Share Posted September 30, 2018 1kz in this would be sweet.. 4 Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted September 30, 2018 Share Posted September 30, 2018 That's my experience too. Pull a motor down for quick freshen up, and everything is just a bit too far gone to reuse as is. If it's a hot engine then no the can be reused because it's all been flogged into oblivion. Quote Link to comment Share on other sites More sharing options...
fletch Posted October 1, 2018 Share Posted October 1, 2018 3rz 3rz 3rz! I helped a mate turbo one in oz. It was silly at 7psi. There is a motor in a shed up here that would be cheap for a spare if you needed it Quote Link to comment Share on other sites More sharing options...
cletus Posted October 1, 2018 Share Posted October 1, 2018 I certed a turboed one in a hilux once, it was surprisingly quick Quote Link to comment Share on other sites More sharing options...
Popular Post Goat Posted October 1, 2018 Popular Post Share Posted October 1, 2018 Find another stocker Al. Get it in and get it gone. Put your efforts into the bus or the cressida like originally planned. Dont turn this into a big project. 16 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted October 1, 2018 Share Posted October 1, 2018 This...^^;. surely to christ there is a shit ton of them kicking around that you can smash in, check it's a good reliable runner and then back to sell. Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted October 1, 2018 Author Share Posted October 1, 2018 37 minutes ago, Goat said: Find another stocker Al. Get it in and get it gone. Put your efforts into the bus or the cressida like originally planned. Dont turn this into a big project. 30 minutes ago, nzed said: This...^^;. surely to christ there is a shit ton of them kicking around that you can smash in, check it's a good reliable runner and then back to sell. Show me. Because so far my searching hasn't netted much lol. 2 Quote Link to comment Share on other sites More sharing options...
Guest Posted October 1, 2018 Share Posted October 1, 2018 Really?? Shit. I hadn't looked. Just sorta assumed...... sooooozz. Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted October 1, 2018 Author Share Posted October 1, 2018 lol its all good. I dont think the Diesel option for this truck was popular back in the day. A few 2lt's around which I am highly contemplating because I loved my old 2lt Super custom. I'm mostly gutted as there was a 2lt powered surf for sale in Wellington with a fucked body for a price I considered reasonable, and assumed it would sell for more. but it did not. Ah well. But yeah I agree with @Goat to an extent. I'm not overly intrested in an over board swap. IE injection or petrol lol. 1 Quote Link to comment Share on other sites More sharing options...
Spencer Posted October 1, 2018 Share Posted October 1, 2018 Tear down the POS that’s in there and get it measured, see if it will take a overbore and usually/hopefully bottom end shouldn’t need much. That’s like couple hundy and wait and see what comes up second hand in that time. End of the day you sink a grand or two in ghetto rebuild or maybe less if the universe deals something up used. Any kind of conversion does not gain any return, it’s counter productive to house buying/saving and free time. This should be pretty obvious. 1 Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted October 2, 2018 Author Share Posted October 2, 2018 Lol. Hadn't realized I had signed into lifecoaches.co.ng But that aside had a swing and miss on an option last night. So the saga continues. #feelingblessed 2 Quote Link to comment Share on other sites More sharing options...
Nominal Posted October 2, 2018 Share Posted October 2, 2018 Options... /spam 9 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.