Popular Post KKtrips Posted March 3, 2020 Author Popular Post Share Posted March 3, 2020 Third kick and 2 seconds later the choke was off and she ran like a champ. 17 1 Quote Link to comment Share on other sites More sharing options...
Chris.QCR Posted March 3, 2020 Share Posted March 3, 2020 Shit yeah KK ! 1 Quote Link to comment Share on other sites More sharing options...
Popular Post KKtrips Posted June 30, 2020 Author Popular Post Share Posted June 30, 2020 Pretty much ready to roll, need to weld on muffler and lose the centre stand. Then shakedown followed by a bunch of fixes. Thanks a shit tonne to Goat, Seedy and the general peanut gallery who make an appearance each week to encourage me with farts and general wise cracks... PFT After Summer will be the strip down and tidy up, right now I'm going rat-rod spec. 11 1 Quote Link to comment Share on other sites More sharing options...
chris r Posted June 30, 2020 Share Posted June 30, 2020 Looks lush. Fax me center stand and spring gubbins plz if you don't want to keep it Quote Link to comment Share on other sites More sharing options...
KKtrips Posted June 30, 2020 Author Share Posted June 30, 2020 I would but I'm keeping it, there is something a screwy with it though, can't figure out for the life of me how the spring attaches, so off it comes and I'll stash it for servicing purposes. 1 Quote Link to comment Share on other sites More sharing options...
chris r Posted June 30, 2020 Share Posted June 30, 2020 Just now, KKtrips said: I would but I'm keeping it, there is something a screwy with it though, can't figure out for the life of me how the spring attaches, so off it comes and I'll stash it for servicing purposes. I'm in the same position with mine hah Quote Link to comment Share on other sites More sharing options...
Raizer Posted June 30, 2020 Share Posted June 30, 2020 7 minutes ago, KKtrips said: I would but I'm keeping it, there is something a screwy with it though, can't figure out for the life of me how the spring attaches, so off it comes and I'll stash it for servicing purposes. 6 minutes ago, chris r said: I'm in the same position with mine hah That is your one @chris r 1 Quote Link to comment Share on other sites More sharing options...
Chris.QCR Posted June 30, 2020 Share Posted June 30, 2020 Super cool to see this thing progress KK ! Enjoy the shakedown rides ! 1 Quote Link to comment Share on other sites More sharing options...
Shakotom Posted June 30, 2020 Share Posted June 30, 2020 Good work KK! 1 Quote Link to comment Share on other sites More sharing options...
Popular Post KKtrips Posted July 21, 2020 Author Popular Post Share Posted July 21, 2020 Progress, all the last bits and pieces came together tonight. Ended up hard-tailing the ass end cos tyre guard clearance might be an issue with my fat ass.. Tasks left, need to true the front wheel cos it is a little wobbly and the tyre is so wide that it rubs a little bit on the inside of the fork legs. But not so bad it will be a major issue. Also need to get a little bit of tube to finish hardtailing the rear end. Got it on the ground and running, put it in gear and rode it under its own power about 2 metres but to go riding required outside moving cars and it was dark so no go tonight - still going to call the small move under its own power a victory. Oh yeah - the idle note is the perfect pop pop pop pop pop with a healthy rasp when I give it a twist. 19 Quote Link to comment Share on other sites More sharing options...
kyteler Posted July 22, 2020 Share Posted July 22, 2020 Just squeeze it past the NSX mate. *sssscrrreeeeeeeeeeeeeetch* "sorry Joe" 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.