Bellicose Posted June 17, 2018 Share Posted June 17, 2018 Thought instead of trying to keep threads updated and starting new ones i'd just put them all in one place then update the thread as i work on one of them. So in this pic' is, 2 x Suzuki B120s (one currently running) .......SOLD Suzuki A50 Scrambler Horse mini bike.....SOLD Phillips Gadabout In a box to the right of the toolbox is an earlier Phillips Gadabout which is a "long term" project. The Scrambler Horse got pulled apart and new brake shoes and jack shaft bearings were installed along with a nice newly re-built and covered seat courtesy of Greg. Next on the list is the A50. Tried to start it but no spark and carb' leaked like a sieve so found the issue causing the lack of spark lol. So into bits it had to go....on the table then after a couple of hours the first bits are ready for the sandblasters in the morning. Tomorrow i'll strip the rims down and get them to the blasters. This won't be to everyones taste but meh....... 4 Quote Link to comment Share on other sites More sharing options...
Bellicose Posted August 15, 2018 Author Share Posted August 15, 2018 The collection grows. Bought for the forks. 8 Quote Link to comment Share on other sites More sharing options...
datlow Posted August 16, 2018 Share Posted August 16, 2018 pedal assist burnout please 1 Quote Link to comment Share on other sites More sharing options...
Bellicose Posted September 11, 2018 Author Share Posted September 11, 2018 And now this.......pffft..... SOLD 8 1 Quote Link to comment Share on other sites More sharing options...
Bellicose Posted December 2, 2018 Author Share Posted December 2, 2018 Few things sold and couple acquired. Another late '50s Mobylette. AND a Motoconfort MobyX. 5 Quote Link to comment Share on other sites More sharing options...
Bellicose Posted January 25, 2019 Author Share Posted January 25, 2019 And a trailer of.....well if you asked my missus it's called "Rubbish"...... 2 Quote Link to comment Share on other sites More sharing options...
Bellicose Posted January 27, 2020 Author Share Posted January 27, 2020 Thought it was time to update this thread. Everything has been sold (except one very long term moped project in boxes) I'm now concentrating on another Gyro. I did a deal with Raizer on my A50 for it. This is how i got it. And this is how it sits, going to the blasters in the morning. Hopefully with only one project i won't get distracted and actually finish it lol. 6 Quote Link to comment Share on other sites More sharing options...
Bellicose Posted February 1, 2020 Author Share Posted February 1, 2020 Blasted and painted, better start re-assembly before alzheimers kicks in. 6 Quote Link to comment Share on other sites More sharing options...
Bellicose Posted February 2, 2020 Author Share Posted February 2, 2020 My OCD kicked in so now I'm cleaning and/or painting EVERYTHING. Second sand blasting pile has started. Quote Link to comment Share on other sites More sharing options...
Bellicose Posted March 6, 2020 Author Share Posted March 6, 2020 Add 70-80mm spacers and you'll get an idea of how wide the arse will be on this thing lol. 5 Quote Link to comment Share on other sites More sharing options...
rumrum Posted April 17, 2020 Share Posted April 17, 2020 any updates ? cheers Quote Link to comment Share on other sites More sharing options...
Bellicose Posted April 18, 2020 Author Share Posted April 18, 2020 On 17/04/2020 at 15:05, rumrum said: any updates ? cheers Nah man. Waiting on spacers, tyres and me to make up my mind on a colour for the plastics. 1 Quote Link to comment Share on other sites More sharing options...
Bellicose Posted May 3, 2020 Author Share Posted May 3, 2020 Little bit of progress. Also tyres ordered. Quote Link to comment Share on other sites More sharing options...
Bellicose Posted May 6, 2020 Author Share Posted May 6, 2020 More bits to the puzzle. 3 Quote Link to comment Share on other sites More sharing options...
Bellicose Posted May 24, 2020 Author Share Posted May 24, 2020 Rims correct way or reversed......hmmmm 2 Quote Link to comment Share on other sites More sharing options...
Bellicose Posted July 9, 2020 Author Share Posted July 9, 2020 Progress is progress..... 8 Quote Link to comment Share on other sites More sharing options...
Raizer Posted July 10, 2020 Share Posted July 10, 2020 Still very interested in how the floor paint goes! Mines flaking off yet again Also the Mrs is close to starting on her AU50, so am still keen to have a chat about you waving your gun at the tank etc at some stage. Quote Link to comment Share on other sites More sharing options...
Bellicose Posted July 19, 2020 Author Share Posted July 19, 2020 On 10/07/2020 at 18:30, Raizer said: Still very interested in how the floor paint goes! Mines flaking off yet again Also the Mrs is close to starting on her AU50, so am still keen to have a chat about you waving your gun at the tank etc at some stage. Have had a bit of a play around with different things and will be going with a rubberized coating with body colour over that for the floorboard. Yeah man no prob'. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Bellicose Posted December 8, 2021 Author Popular Post Share Posted December 8, 2021 Well sh*t, nothing like keeping a thread up to date haha..................... So finally got some colour on the X and got it together to make sure everything fits. Floorboard isn't the one i'm using but it's what i have at the mo'. Will ride it around a bit over summer then pull it apart and do all the stuff i should've to start with. 11 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.