Jump to content

Lux's collection of crappy 2T nangs


HighLUX

Recommended Posts

  • Replies 140
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Went down the google rabbit hole on plug chops

43497251_1208713165920501_72495233896672

Getting close but would rather a bit rich for doing 600ks round the coast so swapped the 118 out for 122mj. Run out of daylight/fucks to do another plug chop but will try again tomorrow after work

  • Like 4
  • Confused 1
Link to comment
Share on other sites

I see the confused reaction @AllTorque, guessing it's at the thread cut off?

 

When doing a wide throttle test over only a short distance the plug won't fully colour up, the smoke ring tells the story better than the tip of the insulator but it's nearly impossible to see properly without cutting the threads off.

  • Like 3
  • Thanks 2
Link to comment
Share on other sites

  • 1 month later...
  • 3 weeks later...
  • 4 weeks later...

Tutu’d with measuring the squish band then pussyed out on taking too much off the head so slapped it back together with 2 headgaskets and some copper spray so no clearance issues and half pie squish band.

Removed the oiling barb from the head and jb welded the port up.

Running good enough for me to nang round the farm/backroads for now. Might take it to the pakeha to get the squish band clearanced properly after the holidays

  • Like 6
Link to comment
Share on other sites

Done 75ks in the last couple of days so whipped the head off to check out whats happening with compustion.

As you can see its got the same issue of only burning on the front of the combustion chamber still with the new tutu'd with head. I thought the electrode for the plug being in the way was not helping the cause but they are 180 out on the 2 heads and still no difference. Time to get it booked in at @MopedNZ work the 2T wizards to sort it properly

 

 

gdbi5vei.2qt.jpg
 

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...