datlow Posted May 4, 2018 Share Posted May 4, 2018 So since I’ve had my cx500 for several years and yet to finish it I did the most logical/os thing and bought a 1980’s? 125xl with og black plates of Facebook last year and promptly got it running plan waaas to fix rusted wheel and re-reg, but got carried away chopping off the gritty seat and back end masked up so I can make a fibreglass seat base, then a mate asked if I’d like a cub of course I would 4 Quote Link to comment Share on other sites More sharing options...
datlow Posted May 4, 2018 Author Share Posted May 4, 2018 So I promptly drove over to Hamilton and grabbed it before he had second thoughts needs suspension and re-reg (still got the old black plates) failed getting it through as a moped and then figured since it’s going into winter and I’d already got a yx140 motor from @Raizer I’ll get it going more than 40km/h and sort rego later 8 Quote Link to comment Share on other sites More sharing options...
Raizer Posted May 4, 2018 Share Posted May 4, 2018 Man that looks like it was so much easier to fit in there than a Chaly! Do a wheelie! 2 Quote Link to comment Share on other sites More sharing options...
datlow Posted May 5, 2018 Author Share Posted May 5, 2018 Yeah just needed the frame ground a bit, have since seen one that they just heated and pulled the pipe out and squeezed a Hose straight in, what did you do with yours @Raizer? Quote Link to comment Share on other sites More sharing options...
datlow Posted May 5, 2018 Author Share Posted May 5, 2018 Also will need the clutch cable bracket moved a bit so I can still bolt The fairing on also got the original side cover vapour blasted and I polished the cover and had a paint pen that’s close enough to the right colour 2 Quote Link to comment Share on other sites More sharing options...
Raizer Posted May 5, 2018 Share Posted May 5, 2018 14 minutes ago, datlow said: Yeah just needed the frame ground a bit, have since seen one that they just heated and pulled the pipe out and squeezed a Hose straight in, what did you do with yours @Raizer? Mine came with a vent hose already fitted, my frame is fairly open behind the engine so it just threaded down around the swingarm mount. 1 Quote Link to comment Share on other sites More sharing options...
BLIZZO Posted May 7, 2018 Share Posted May 7, 2018 Does that side cover fit on the 140? Mine wouldn’t . Quote Link to comment Share on other sites More sharing options...
datlow Posted May 18, 2018 Author Share Posted May 18, 2018 On 5/7/2018 at 17:17, BLIZZO said: Does that side cover fit on the 140? Mine wouldn’t . Yeah.... nah never mind bit of grinding on the back of the honda logo cover and a couple of holes (anyone have a spare one for the other side?) 4 Quote Link to comment Share on other sites More sharing options...
My name is Russell Posted May 18, 2018 Share Posted May 18, 2018 Side cover is a nice touch, will copy N paste Quote Link to comment Share on other sites More sharing options...
datlow Posted June 1, 2018 Author Share Posted June 1, 2018 No Wof, new reg, no worries fuck yes thanks vtnz thornden quay 9 Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted June 3, 2018 Share Posted June 3, 2018 Oh dude that's rad! I know you jad been having trouble getting that sorted so that is much good. Plus its good to know another place to get plates. Good jewb 2 Quote Link to comment Share on other sites More sharing options...
kdotlowe Posted June 5, 2018 Share Posted June 5, 2018 Don't happen to have the original XL seat pan do ya? I need a seat that fits my XL100s.. and they look similar! Quote Link to comment Share on other sites More sharing options...
datlow Posted June 5, 2018 Author Share Posted June 5, 2018 @kdotlowe no sorry it was rusty and mouldy so got thrown 1 Quote Link to comment Share on other sites More sharing options...
Watchmaker Posted June 7, 2018 Share Posted June 7, 2018 Thorndan Quay for the win, that's where I got mine done as well. What part of the frame did you have to grind away and why? I've got a 125 in one of my C50s but I was thinking of a 140 for the new build. Quote Link to comment Share on other sites More sharing options...
datlow Posted June 9, 2018 Author Share Posted June 9, 2018 On 5 May 2018 at 13:20, datlow said: Yeah just needed the frame ground a bit, have since seen one that they just heated and pulled the pipe out and squeezed a Hose straight in, what did you do with yours @Raizer? Hey @Watchmaker, yeah vtnz was casual as, the bit with the White mark above the crank in the frame (the main tube that joins the headstock to the body) as it was fouling on the black cap bit which is the breather tube for the motor, but I've since heard of people heating the metal tube and removing and just jamming a bit of Flexi hose straight in the hole Quote Link to comment Share on other sites More sharing options...
datlow Posted September 13, 2018 Author Share Posted September 13, 2018 Making some better (hopefully) front shocks 5 1 Quote Link to comment Share on other sites More sharing options...
Popular Post datlow Posted September 13, 2018 Author Popular Post Share Posted September 13, 2018 Got some gas sans snag from Bunnings so I can carry on with the zorst and front shock mounts too should be ideal noisy/burny goodness 11 Quote Link to comment Share on other sites More sharing options...
Mop Head Posted September 13, 2018 Share Posted September 13, 2018 Might wanna make asbestos pants. 1 Quote Link to comment Share on other sites More sharing options...
Shakotom Posted September 13, 2018 Share Posted September 13, 2018 11 minutes ago, MopedNZ said: Might wanna make asbestos pants. Nah mate, just a bit of the electric blanket from the hotel. bike looks lush Quote Link to comment Share on other sites More sharing options...
datlow Posted September 13, 2018 Author Share Posted September 13, 2018 Have to have lady like passengers too Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.