Jump to content

Carb Repair


bonkas

Recommended Posts

Hey Guys,

I have issues with some Dual DHLA 45's I just bought.

One of these has had the mount break off and welded back on which didnt seem an issue until they arrived and I had a close look.

The barrell (Is that what it's called) seems out of shape and has been built up with some material to try and get it round so the throttles will seal, this has flaked away somewhat and one side no longer seals on the carb.

Can this be fixed?

I will get some pics when I get home tonight.

Link to comment
Share on other sites

It's hard to tell in the pics how bad it is. Are you in Auckland? Pull it to pieces and have @Mr Vapour Vapour blast it for you so it looks A+, get a new throttle shaft and bearing set from somewhere on the internet (Ebay, chances are that throttle shaft isn't straight which is making the situation worse). slap it all back together and see how bad it is then - it might be usable as is.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...