pbaines

PBaines 1977 Toyota Corolla KE30

Recommended Posts

This weekend was good, learn a bit prepping some panels and they've come out pretty well!!
Please excuse potato cam photos.

 

Just gloss blacked the steering setup. The tie rods look reassembly good and the bushes are in good shape
29055704897_e889468637_o.jpg

Installed:
29055705337_106b0642b4_o.jpg

 

Guards and valance done, looking tip top, very happy with the result so far:
29055704637_44b9008cca_o.jpg

43087613575_a31ef5578e_o.jpg

 

Then i tore the brake master cylinder apart, gave it a good clean, put new gasket goo around and gave the block a paint, and chucked the brake lines back in
29055703977_3db52c7297_o.jpg

 

Onto the doors next weekend!!!

 

Discussion:

 

 

  • Like 9

Share this post


Link to post
Share on other sites

This weekend I did some wiring which seemed to have decided it didn't want to work since disassembly, to be fair I didn't check anything before I ripped it apart so hard to be sure.

1) Fixed the reverse lamps on the rear lenses to work when in Reverse gear
2) Rewired the KE30 loom to be of KE35 pin layout type, and run and rejuggle new/existing wires to the cluster

 

This is for the reverse lamp, it's a different setup from the K40 that came with the car so had to to do some rejigging with the wiring. I don't have any new terminals so just chopped up some old ones, soldered and heat shrinked them up
45511493321_2da8a16409_o.jpg

 

43694189000_61188e9fb4_o.jpg

 

45511492811_7fac396347_o.jpg

 

Tired of looking at this awful bonnet, I brush painted it with black epoxy paint. If I decide to fix all the errors with it one day, I will. otherwise it can stay like this until I find a new one that isn't so buggered
45511492631_5078e4f76a_o.jpg

 

43694188230_993e60cf92_o.jpg

 

45511494781_e091dec699_o.jpg

 

 

I also had a nice VDO tachometer I thought would be marvelous in the cluster.
 

31638698368_0c87e37d36_o.jpg

This water gauge too. I thought I could just get it all in there and swap it out for a VDO one later on
45511492321_0368012ca7_o.jpg

 

After chopping and slicing, pulling things apart it came together
45511492161_6c4fcc4405_o.jpg

 

only 30% of these wires are used, but I thought I would just put them all together anyway to keep them nice and tidy. This is a 24-pin ATX plug most commonly found in computers. I've got loads of these around and thought what a good way to assemble it all
 

31638698088_9fe4bc4eb1_o.jpg


43694186860_9c4ef297eb_o.jpg


43694190660_04417e8b26_o.jpg

 

**I have two of these clusters so I can always go back to original if need be!!!

Before:
45511495041_e83914f1ec_o.jpg

After:
45511494261_00f6dd55ec_o.jpg

 

So now I have a very accurate tacho, which looks pretty sweet and a water gauge to know how hot my baby 4k really is.
45511494051_1186f0ea7d_o.jpg_MG_0379 by phillipbaines, on Flickr
 

it's crooked... I'll fix it when I get the new VDO gauge
43694189810_af36edb6e2_o.jpg

 

till next weekend!
45511493531_f196e819e8_o.jpg

 

 

Build discussion:

 

 

  • Like 8

Share this post


Link to post
Share on other sites

Semi productive weekend, wasn't able to do much. I'm just waiting on parts now.

this weekend I bought:
Front half of center console (got a line on a rear half so that's good)
Front seats (need a massive clean)
SR steering wheel

Rear shoes and new drum cylinder as the ones in there were absolute wrecked
Ordered front pads to do next weekend. I'll get a price to rebuild the front calipers too

 

Old:
45611931691_3c97c8d551_o.jpg

 

Fressshhh:
45611931511_04f306cdda_o.jpg

 

Dope wheel:
44887411744_f56c862dd4_o.jpg

 

kewl seats:
45611931061_d29db0c356_o.jpg

 

I'll be getting a pro to do the bonnet. it's just too far out of my league to fix. it's bent in funny places, rust everywhere. These bonnets are hard to find so will get someone to do the prep on it and I maybe the paint... will see
45611931461_3792c58f53_o.jpg

 

But in much cooler news.................

 

Water pump leaks, exhaust leaks out the gaskets. but it runs. I'll fix those few minor things too
 

 

 

  • Like 7

Share this post


Link to post
Share on other sites

This weekend I decided to go ask about getting some carpet underlay to whip under neath the carpet in the cabin to make it a bit more homely. Ended up getting a big slab of it for free! Thank god for useless offcuts..

 

I am no professional fitter by any means. it didn't really come out nice in 3 cut sections but it will all fit in well when the carpet goes back in
48565370997_cc4beccfb6_o.jpg20190817_181032 by phillipbaines, on Flickr

I also got sick of the awful looking dirt ridden seats that are impossible to find in any sort of 'good' condition so the cheapest fix is to show down to Super Cheap and get some car covers. Which look 10000% better, 
48565227056_3f39c8bcbb_o.jpg20190817_143241 by phillipbaines, on Flickr

48565371122_b645d438c7_o.jpg20190817_152236 by phillipbaines, on Flickr

 

After installed, got some snaps. List hasn't changed since last weekend but now it's a bit more respectable.
48565372712_df6f37af1a_o.jpg3 by phillipbaines, on Flickr

48565372897_4975365412_o.jpg1 by phillipbaines, on Flickr

48565227206_c522023231_o.jpg11 by phillipbaines, on Flickr

48565372837_e3c62d83c7_o.jpg2 by phillipbaines, on Flickr

48565228226_59684dece0_o.jpg4 by phillipbaines, on Flickr

48565372312_e8815ac07b_o.jpg5 by phillipbaines, on Flickr

48565372102_0d3248a4e2_o.jpg6 by phillipbaines, on Flickr

48565227371_7c4063a760_o.jpg10 by phillipbaines, on Flickr

48565371807_b4bd26761b_o.jpg8 by phillipbaines, on Flickr

48565227706_1d2d81322a_o.jpg7 by phillipbaines, on Flickr

 

Build Discussion:

 

  • Like 5

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.