Jump to content

Tomica93 1987 Mitsubishi Galant 2.0Turbo DOHC RalliArt version


Tomica93

Recommended Posts

Hello everyone, I will try to represent my car. It is ultra RARE version of Galant, with a lot of modifications. Been working on this car for 7years, so updates will keep coming :)

Its in family for around 20years, second owner

A lot was done on this car, so i will try to represent it step by step, its a very detailed topic, for true lovers

so lets start

1987 Mitsubishi Galant 2.0Turbo DOHC RalliArt
Odometre
137xxx km

 

Engine Hardware
4G63T- 2.0T DOHC - 16v, 6bolt
313HP

395Nm
Transmission
5 Speed MANUAL
gearbox from 2.4engine(4G64)

Engine Modifications
Vems standalone management system
Blow off-Turbosmart dual port
boost is on 1.3bar
exhaust 70mm(rear custom made muffler with electric cutout)
intercooler from EVO10
walbro 255lph fuel pump
intake box & k&n filter
560cc injectors from EVO9
Bosch lamda LSU 4.9
Bigger fuel filter, OEM from Eclipse 2G
EVO2 BIG 16G turbo
EVO2 manifold
EVO2 O2 housing
EVO8 hrottle body
intercooler pipes from steel and polished
second ventilator for better cooling
water cooling for intercooler
Eclipse coils
hks turbo timer


Brakes:
Brake booster from Nissan S14 + brake master cylinder from Carisma GDi
Brembo 4pot brakes,320mm slotted and drilled willwood discs + ABS
rear standard Turbo

 

Suspension Modifications
Front:
Cusco coilovers
Strut Brace
Rear:
Cusco coilovers with adjustable dampers

strut brace

 

Wheels & Tyre Modifications
17" OZ Superleggera
215/45/17 new Continental ContiSportContact5 tyres

Exterior add-ons:
RalliArt body kit
rain window visiors
RalliArt mudflaps

 

Interior Add-ons:
power mirrors
power windows
red light illumination
OEM EVO9 RS triple gauge set

original power antenna

headlight washers

cruise control

 


On begining it was a stock 2.0(4G63) carb

25455160001_large.jpg

25455160002_large.jpg

Then I got a RalliArt body kit in very bad shape, and spend around 200hours to get it in lets say good shape

DSC00422800x600.jpg

DSC06670800x600-1.jpg

DSC02813800x600.jpg

DSC02885Rezolucijaekrana800x600.jpg

DSC03901800x600.jpg?t=1312041703

DSC05759800x600.jpg?t=1312041534

DSC05657800x600.jpg?t=1312041545

DSC05653800x600.jpg?t=1312041546

Some polished stuff

DSC07448800x600.jpg

DSC07111800x600.jpg

 

  • Like 3
Link to comment
Share on other sites

DSC07050800x600.jpg

DSC07055_zpswbwtgav9.jpg

DSC03489_zps5w1zxvio.jpg

Very RARE Turbo underneath plastics

DSC03519_zps8g1uoc1t.jpg

DSC03297_zpsuwutzgwo.jpg

DSC04300_zpshcj3duvf.jpg

With fitted body kit

_3183634800x600.jpg


I also got original digital dash

IMG_6885800x600.jpg

And some videos

http://www.youtube.com/watch?v=O4F5SVLCkmM

http://www.youtube.com/watch?v=yLPEfIUl6rk&feature=youtu.be


Then i got BRAND NEW rear RalliArt spoiler

IMG_72981024x768.jpg

New one is much better than old one

IMG_72911024x768.jpg


Then i got Wilwood 310mm brakes

DSC07641Rezolucijaekrana.jpg

 

  • Like 3
Link to comment
Share on other sites

So going with the engine

It was a stock 4G63 carb engine with 102hp

Bijeli%20064%20Kopiraj_zps6mkaubee.jpg

then i got original 2.0Turbo engine , known as a G63BT 8 valves, with 150hp

DSC02928_zps4ol0bvoc.jpg

after some modding , adding up a intercooler, and settiong boost on 1.0bar it pulled out 175hp, but the power above 5000rpm was pretty bad


_3020774_zpsxhbjdy4l.jpg

So i decided to go multipoint

i got a Megasquirt 2 Extra, intake manifold from 2.4 engine, 450cc eclipse injectors

after a lot of hard work, result was great, 227hp@5000rpm and 348Nm

DSC09195_zpsanpd2hhd.jpg

Also then, i have painted a body kit, so all was looking much nicer

DSC09153_zpspbamsgbd.jpg

DSC09157_zpsyfhgow1k.jpg

DSC09154_zpsfkbl4tue.jpg

The story goes on

As turbo was very old, it starded smoking on idle, and i got a great deal on a DOHC engine, so the DOHC came in from eclipse, and i sold my engine to Austria

 


IMG_5696%20Kopiraj_zpsfjkufhsp.jpg

IMG_5700%20Kopiraj_zpsxxaiem0n.jpg

IMG_5777%20Kopiraj_zpsab1e6hui.jpg

Then i started to rebuild the engine

First parts arrived

ARP head studs
set for balance shaft delete
injector rubber
oil filter x2
oil cap gasket x2
O2 housinga and downpipe 70mm gasket

C9CB5CE7-AF4D-41CF-B61F-B8A1F94B515C_zps

91E51F29-7553-43C3-8272-8F8128E2D828_zps

1C558605-BBEB-4B1A-B50B-68567ECA1B32_zps

set for balance shaft delete

34A8EF46-B0E4-4D8F-8947-1977E901BE1C_zps

engine dissasembled

IMG_2246Kopiraj_zps16557feb.jpg


IMG_2414Kopiraj_zps8333ca92.jpg

 

IMG_2415Kopiraj_zps3986d029.jpg

then balance shafts are out, total weight save is 2.9kg

IMG_2259Kopiraj_zps0cd3ab18.jpg

IMG_2261Kopiraj_zps555e1b9c.jpg

OEM part for oil pump housing

IMG_2256Kopiraj_zpsc3ce1ef4.jpg

then the cleaning part

IMG_2235Kopiraj_zps92dcfbca.jpg

IMG_2377Kopiraj_zps12eaea4c.jpg

IMG_2264Kopiraj_zpse2af5343.jpg

IMG_2372Kopiraj_zpscc9f9b1e.jpg

valve coer was in pretty bad shape

IMG_2374Kopiraj_zps952197fa.jpg

IMG_2378Kopiraj_zpsbd3cf6e0.jpg

piston before and after

IMG_2449Kopiraj_zps8551cf5c.jpg

IMG_2450Kopiraj_zps7e9ffce3.jpg

then next part was block

IMG_2423Kopiraj_zps3b7d2278.jpg

painted

IMG_2440Kopiraj_zps6eab8dfe.jpg

IMG_2441Kopiraj_zps102b074a.jpg

IMG_2443Kopiraj_zpsf7eec181.jpg

 

  • Like 4
Link to comment
Share on other sites

machine work done

honed and surfaced block, surfaced valves, surfaced head, and a polished crankshaft

IMG_4388Kopiraj_zps708a7ebe.jpg

IMG_4439Kopiraj_zps9dde9be2.jpg

IMG_4379Kopiraj_zps05e5d2f0.jpg

IMG_4378Kopiraj_zps2333a30d.jpg

IMG_4380Kopiraj_zpse71aaf12.jpg


how it should look when i will start assembley

IMG_3443Kopiraj_zps83234086.jpg

 then i got mitsubishi eclipse 3g lifters

difference between 1g and 3g

Lifters002.jpg

IMG_4257Kopiraj_zps221d17da.jpg

next is cleaning, and working on a port job on the oil gallery on the block (where oil pump sits)

  • Like 1
Link to comment
Share on other sites

head on its place, torqed

thermostan housing, camshafts, lifters, rocker arms etc ,all in its place

its really nice to put all of those things together while they are so clean

DSC02592Kopiraj_zps1c9451e4.jpg

DSC02599Kopiraj_zps002907fc.jpg

thermostat housing

DSC02622Kopiraj_zpsc66d69f1.jpg

thread locker on the oil plug for oil gallery on the head

DSC02621Kopiraj_zps5bd32995.jpg

DSC02623Kopiraj_zps8142231b.jpg

DSC02627Kopiraj_zps18564269.jpg

DSC02626Kopiraj_zpsd3285d29.jpg

 

 

 

  • Like 5
Link to comment
Share on other sites

i got an exhaust turbo, manifold and o2 housing from evo2

Aisin water pump came in

IMG_6265Kopiraj_zps7e459a82.jpg


i was in Budapest for a New Year and i got few (read a lot) spare parts for Galant

4 of us were in Budapest so i need to organized it very well

IMG_6294Kopiraj_zps61d69f96.jpg

also i got rare genuine mitsubishi wheels for Galant / Sapporo 81-84, as far as i know there are 4 sets in my country, and i have 2 sets :)

IMG_6419Kopiraj_zps1b629423.jpg

IMG_6421Kopiraj_zps8d2381d6.jpg

IMG_6422Kopiraj_zps46f4b88e.jpg

i got genuine front brake pads for EVO3 calipers

10872446_10204077847520382_943702524_n_z

oil pan is installed

10877671_10204078047125372_1742288242_n_

 

  • Like 2
Link to comment
Share on other sites

finnaly i got the last package with parts

turbo is restored, had a few broken bolts in it, but now it is like new

IMG_6514Kopiraj_zpsafd9a5bf.jpg

IMG_6527Kopiraj_zpsab5b07ca.jpg

IMG_6575Kopiraj_zps9c47fde7.jpg

Difference between Eclipse 1g and EVO2 exhaust manifold

IMG_6531Kopiraj_zps89113a0b.jpg

Turbo is prepared

IMG_7132Kopiraj_zps93e4558a.jpg

another round from galvanized

combine_imagesKopiraj_zps5966aa0c.jpg

New and old water pump

IMG_7125Kopiraj_zpsdc6c80ac.jpg

IMG_7136Kopiraj_zps6f0945c9.jpg

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...