Muncie Posted December 15, 2016 Author Share Posted December 15, 2016 This is a busy little spot chain cogs shafts and brake all stuffed in there little battery so i can ride it at night (need a light) so people cant see how ridiculous i look at speed. Signs of life...... Awful smelling tyre it certainly spins fast enough 1 Quote Link to comment Share on other sites More sharing options...
Muncie Posted December 16, 2016 Author Share Posted December 16, 2016 Ass puckering handling at speed round corners while giving it berrys steps it out like a bitch! Weirdly controllable standing up though just feels sketchy hop off gas it straightens up. Super fun! Quote Link to comment Share on other sites More sharing options...
jake. Posted December 16, 2016 Share Posted December 16, 2016 Got any videos of you going for it? Sounds awesome haha Quote Link to comment Share on other sites More sharing options...
Muncie Posted December 16, 2016 Author Share Posted December 16, 2016 Will get something up soon waiting on a back ordered throttle cable all the test runs have been by banging the throttle onto rabbit and holding on flicking the kill switch if it gets to hairy. Once ive got the cable will gut the governor too its bloody intrusive. Quote Link to comment Share on other sites More sharing options...
Muncie Posted December 16, 2016 Author Share Posted December 16, 2016 Look at this on eBay http://www.ebay.com/itm/252617889949 Hmm wonder if this is actually a thing. Quote Link to comment Share on other sites More sharing options...
Muncie Posted December 17, 2016 Author Share Posted December 17, 2016 Got run off road today by grumpy old prick in a 4wd lunched chain and cracked a wheel. Took it too a car park out by puketirini lake here in Huntly to avoid upsetting anyone mission failed there FFS. Hopefully can get a new wheel or im breaking welder out again to adapt something else. Quote Link to comment Share on other sites More sharing options...
Muncie Posted December 22, 2016 Author Share Posted December 22, 2016 Seeing as ive turned my back rim into this square shaped thing I've cracked into some other things i needed, like getting more power and more RPM'S Ello governor your services will no longer be required while i had the muffler off to access that bastard device i noticed how shit the exhaust port is........ 30 minutes with a file it should flow way better now. Which of course led me looking in here Rocker Arms have ass loads of gap so have closed those up hopefully giving me a bit more lift it runs good and is way more snappy on the blip of the throttle now however i'm contemplating whipping the head off and porting the fuck out of it as there is plenty of meat able to be removed and maybe shave the head a bit for more compression. Then an exhaust that doesn't choke it to death would surely help. 2 Quote Link to comment Share on other sites More sharing options...
Muncie Posted February 8, 2017 Author Share Posted February 8, 2017 After several attempts to make the smaller chain work i just couldn't get it to stay on the sprockets, so after some head scratching how i could get a sprocket in 420 chain small enough to fit i ordered a 17 tooth front sprocket from a random dirt bike off trademe. After killing 3 or so drill bits it got 4 holes in it and bolted on it now works and doesnt throw chains. The carb however has decided to jam at 3/4 throttle and again at idle. Anyone know if a trademe universal 2 stroke carb might work? Quote Link to comment Share on other sites More sharing options...
Muncie Posted July 9, 2017 Author Share Posted July 9, 2017 So been a while has it been put in corner of the shed and forgotten about? Hell no its become reliable transport it folds up and fits in my boot nicely ive ridden usually 2 up bloody everywhere. Im thinking of building more in fact. Oh and my son has discovered burnouts much to the neighborhoods disgust. 1 Quote Link to comment Share on other sites More sharing options...
Muncie Posted August 6, 2017 Author Share Posted August 6, 2017 So 2.5hp is cool an all...... Been looking for something a little bigger found it. Shits about to get real fun 2 Quote Link to comment Share on other sites More sharing options...
Kimjon Posted August 6, 2017 Share Posted August 6, 2017 I had to Google what that motor is. Looks like wheelie bars may be mandatory after fitting that bad boy! Quote Link to comment Share on other sites More sharing options...
Muncie Posted August 6, 2017 Author Share Posted August 6, 2017 Complete new frame i think may be in order. Rebuild is a priority these engines sound awesome so might look down path of something road legal. Quote Link to comment Share on other sites More sharing options...
Muncie Posted August 19, 2017 Author Share Posted August 19, 2017 Hmm i only sat it on this so i didnt have to carry it..... this is how the other one came to be. 6 1 Quote Link to comment Share on other sites More sharing options...
Muncie Posted August 20, 2017 Author Share Posted August 20, 2017 stripped all the covers off this weekend and gave the thing a good clean has definitely been looked after brand new carb and air filter inside. Previous owner thought it had low compression as it was hard to start and struggled to stay running, threw 12 volts at it turned key with a puff of engine start away it went.... and then died without picking up any fuel. Fuel pump is shot sucks up just enough to make it run not enough to do anything useful but it definitely sounds sweet with no muffler. It also has a proper oil system so a turbo would actually work on it being 610cc it would spool up a small one too. Right i need a frame....... Quote Link to comment Share on other sites More sharing options...
Muncie Posted September 2, 2017 Author Share Posted September 2, 2017 Electric fuel pump on now it starts and runs with very little fuss. My son insisted it needs the turbo i had stored for my triumph on it think he may be right. Go kart or mini chopper frame needed asap. Quote Link to comment Share on other sites More sharing options...
Muncie Posted November 11, 2017 Author Share Posted November 11, 2017 Time for the big block conversion...... The 2.5 hp motor had become so temperamental recently It had to go as well as the electric scooter wheels which cant handle rough surfaces at all. I've got some pocket bike wheels for it now which will give me disc brakes too (much needed) going for a Cvt on this instead of the centrifugal clutch. 1 Quote Link to comment Share on other sites More sharing options...
Muncie Posted November 11, 2017 Author Share Posted November 11, 2017 Will be mental sounds like a buell with the straight pipe will be getting straight twin pipes once it's mobile again. 1 Quote Link to comment Share on other sites More sharing options...
Muncie Posted November 12, 2017 Author Share Posted November 12, 2017 Started stripping off anything that isn't motocycly so it doesn't look like a kitchen appliance. More dirt..... another dose of oven cleaner and a waterblasting is called for. 1 Quote Link to comment Share on other sites More sharing options...
Muncie Posted November 12, 2017 Author Share Posted November 12, 2017 Wanting a more sexy carb setup a 2 barrel downdraught with a nice air filter would be my preference, though some bike carbs would float my boat as well. 1 Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted November 12, 2017 Share Posted November 12, 2017 Oh wow, that motor is HUGE. I vote minibike frame 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.