10Speed Posted September 16, 2016 Share Posted September 16, 2016 See the pic of my exhaust setup below, where do I put an O2 sensor? and while we're talking about it does anyone have a source of reasonably placed ones? Quote Link to comment Share on other sites More sharing options...
kpr Posted September 16, 2016 Share Posted September 16, 2016 Somwhere around the compressor housing should be ok. pointing up. You dont want it too close to the turbo outlet. as maybe a bit hot. Also not too close to the end as will get bad readings, is that a slip joint where that clamp is? make sure it doesnt leak 1 Quote Link to comment Share on other sites More sharing options...
Ned Posted September 16, 2016 Share Posted September 16, 2016 Guessing you mean source of reasonably priced ones? I got one delivered from 14point7.com a few weeks ago for $200nz delivered. Nice little unit. Uses a few of his controllers and have all been good. 1 Quote Link to comment Share on other sites More sharing options...
downtrail Posted September 16, 2016 Share Posted September 16, 2016 Is the exhaust of the left a dummy? Hard to tell on phone. If it is id go on the corner just after that resonator. Quote Link to comment Share on other sites More sharing options...
10Speed Posted September 16, 2016 Author Share Posted September 16, 2016 Somwhere around the compressor housing should be ok. pointing up. You dont want it too close to the turbo outlet. as maybe a bit hot. Also not too close to the end as will get bad readings, is that a slip joint where that clamp is? make sure it doesnt leak yeah, its a slip joint, and yeah it does leak... but will weld it up when I put the bung in Guessing you mean source of reasonably priced ones? I got one delivered from 14point7.com a few weeks ago for $200nz delivered. Nice little unit. Uses a few of his controllers and have all been good. Opps yes, I did... looks like they're out of stock at the moment... but that's about the right price Is the exhaust of the left a dummy? Hard to tell on phone. If it is id go on the corner just after that resonator. left hand side is the waste gate outlet... theres not risk, of it being too close to the end of the exhaust after the resonator? Quote Link to comment Share on other sites More sharing options...
downtrail Posted September 17, 2016 Share Posted September 17, 2016 Should be ok there may not read so well at idle if theres lots of reversion but once revs are up a bit will be fine. We try keep them about a metre away from the end of the ex housing to try make them last a bit longer. Thats a cool idea with the wastergate! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.