Alfashark Posted January 17, 2021 Share Posted January 17, 2021 Are they pulsed, or CIS like an old K-Jet setup? Quote Link to comment Share on other sites More sharing options...
cletus Posted January 17, 2021 Author Share Posted January 17, 2021 I assume pulsed as theres an electrical plug with enough wires for 8 injectors I was googling stuff about them and someone mentioned 'poppet injectors ' so I'm picking theres a electric injector in the main block which lets fuel down the tube and the injector at the end makes some fuel jizz out when it gets to x amount of pressure? 2 Quote Link to comment Share on other sites More sharing options...
cletus Posted January 17, 2021 Author Share Posted January 17, 2021 I did some searching to find what brand of spindles they are as there is only a couple of casting numbers on them, no brand name. The only pics I could find where the castings appeared to be the same manufacturer had a minor issue 3 3 Quote Link to comment Share on other sites More sharing options...
Valiant Posted January 17, 2021 Share Posted January 17, 2021 Just don't do that to your ones and it'll be fine. 4 2 Quote Link to comment Share on other sites More sharing options...
scooters Posted January 17, 2021 Share Posted January 17, 2021 well shit. a crack test every year should catch it right before it happens ? 1 Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted January 17, 2021 Share Posted January 17, 2021 found a pic of our one for inspiration. they are heaps of fun to drive. i took this on my rapid crash course in learning to drive LHD. from carterton to Christchurch. finding somewhere to park it in wellington CBD where my company booked a hotel for me was an absolute bastard. ended up just using the hotel valet 5 2 Quote Link to comment Share on other sites More sharing options...
Popular Post cletus Posted January 25, 2021 Author Popular Post Share Posted January 25, 2021 I've been in some inner turmoil deciding what to do with this thing but I think I'll keep it for a bit. A mate is keen on buying my van so that takes care of what to do with too many vehicles Have spent a bit of time looking at other ones on the internet and I'd like it to look like these pretty much. 4/6 drop= spindles and springs in the front, axle flip rear and a small notch 11 Quote Link to comment Share on other sites More sharing options...
kyteler Posted January 25, 2021 Share Posted January 25, 2021 Yussssss. Do it. Quote Link to comment Share on other sites More sharing options...
scooters Posted January 25, 2021 Share Posted January 25, 2021 How good. Who remembers the orange quest 4 lux on bags and v8? That's all I can think about when you say notch.. 2 Quote Link to comment Share on other sites More sharing options...
Popular Post cletus Posted January 25, 2021 Author Popular Post Share Posted January 25, 2021 Speaking of notches, lol 3 8 1 Quote Link to comment Share on other sites More sharing options...
tortron Posted January 25, 2021 Share Posted January 25, 2021 its probably not flexing side to side tho is it /jfc muricans 2 Quote Link to comment Share on other sites More sharing options...
scooters Posted January 25, 2021 Share Posted January 25, 2021 "attach using the self drilling screws supplied in the kit" 3 Quote Link to comment Share on other sites More sharing options...
h4nd Posted January 26, 2021 Share Posted January 26, 2021 18 hours ago, cletus said: ... van ... https://www.trademe.co.nz/a/motors/cars/toyota/listing/2939408453?bof=ncAoTg69 2 1 Quote Link to comment Share on other sites More sharing options...
cletus Posted February 3, 2021 Author Share Posted February 3, 2021 Waterblaster on the seatbelts trick works pretty good. Bleargh stuff coming out That's not wet and dry, the grey bit is where it's been blasted.... They look pretty good now they have dried out 8 1 Quote Link to comment Share on other sites More sharing options...
KKtrips Posted February 3, 2021 Share Posted February 3, 2021 On 25/01/2021 at 20:27, cletus said: Speaking of notches, lol You make me want to cry. 1 2 Quote Link to comment Share on other sites More sharing options...
UTERUS Posted February 3, 2021 Share Posted February 3, 2021 21 hours ago, cletus said: Waterblaster on the seatbelts trick works pretty good. Bleargh stuff coming out That's not wet and dry, the grey bit is where it's been blasted.... They look pretty good now they have dried out Had to do this the other day when flatmate failed wof for missing button on the seatbelt. Replaced button and gave the belt a birthday with simple green. Tidy up the edges with the lighter and Robert is your brothers mother. Edit: I just realised this is your project thread, sorry about that hah. 6 Quote Link to comment Share on other sites More sharing options...
cletus Posted February 7, 2021 Author Share Posted February 7, 2021 Been fixing things and also making things worse sometimes? Degreased and waterblaster engine bay. Next day it started misfiring. Check engine light came on. Bought OBD scan thing , cam angle sensor, ordered one, waiting for it to arrive. Still runs ok just has a misfire now and then Boss had bought most of the parts to do everything but got the CBFs so fortunately I didnt have to spend much, I only had to get wheel bearings and wheel cylinders. fitted new discs, pads, bearings and an abs sensor to the front, new shoes wheel cylinders and drums on the rear. The new drums are not round so I had to swap the old ones back on to stop the pedal pulsing.... stops a lot better now though and the abs works again, the wiring had got in the way during a balljoint replacement prior to my ownership, and was cleft in twain by a misplaced hammer blow Replaced a broken exterior door handle, that was a cunt of a job, and adjusted the interior handle mechanism after getting trapped inside it a couple of times Fitted new door speakers, they had fallen apart, which is the general theme of the interior, theres a lot of cracked plastic bits The diff needs a rebuild, it's a bit noisy and has play in the pinion bearing. Booked for a new windscreen on Thursday, after that I'll swap the van back and get that ready to sell 9 Quote Link to comment Share on other sites More sharing options...
GuyWithAviators Posted February 20, 2021 Share Posted February 20, 2021 Clint pls 7 2 Quote Link to comment Share on other sites More sharing options...
cletus Posted February 20, 2021 Author Share Posted February 20, 2021 Sweet! I like the stock wheels but low look, this is a mates GMC 6 Quote Link to comment Share on other sites More sharing options...
cletus Posted February 20, 2021 Author Share Posted February 20, 2021 And another from the internet that I like 5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.