chris r Posted April 26, 2020 Author Share Posted April 26, 2020 20 minutes ago, Bearded Baldy said: He is right you know, then comes lightweight billett flywheels and 4pinion lsds.... The 253 bits in have already have ported heads so that's the hard work done. I was thinking of injecting to but again it's more $$ and certs etc etc 202 with extractors and a mild cam I'll not have to worry as much. Its still a bit too original for me to much around with I feel 1 Quote Link to comment Share on other sites More sharing options...
Bearded Baldy Posted April 26, 2020 Share Posted April 26, 2020 I agree with you on the originality part. That is why my xc is still the old 4.1l lump. Just i got carried away last rebuild. But it is fun so it is all good 1 Quote Link to comment Share on other sites More sharing options...
chris r Posted April 26, 2020 Author Share Posted April 26, 2020 4 hours ago, Bearded Baldy said: I agree with you on the originality part. That is why my xc is still the old 4.1l lump. Just i got carried away last rebuild. But it is fun so it is all good Yeah it is fun rebuilding and upgrading. Even if it's a shiny turd at the end of the day 1 Quote Link to comment Share on other sites More sharing options...
Raizer Posted May 8, 2020 Share Posted May 8, 2020 "Stage 3" doesn't give much of a description, how many fractions of a race cam is is?? 2 1 1 Quote Link to comment Share on other sites More sharing options...
cletus Posted May 8, 2020 Share Posted May 8, 2020 We dont work in fractions now, the conversion is 3/4 race cam equals 75%racecam nowadays Stage 3 is probably 31.7%racecam by today's conversion rate. 1 3 1 Quote Link to comment Share on other sites More sharing options...
kyteler Posted May 8, 2020 Share Posted May 8, 2020 Also., it's a 202. You're obligated to get a Cain or Redline manifold to fit a 4barrel Holley carb. 2 Quote Link to comment Share on other sites More sharing options...
j.e.d. Posted May 8, 2020 Share Posted May 8, 2020 I've got an AC HQ 202 race cam I just chucked on TM cheap if you're interested (probably a bit late now TBH but oh well) Quote Link to comment Share on other sites More sharing options...
chris r Posted May 8, 2020 Author Share Posted May 8, 2020 Just now, kyteler said: Also., it's a 202. You're obligated to get a Cain or Redline manifold to fit a 4barrel Holley carb. Been keeping half a eye out for a manifold. And I'd be better off with fuel in the washer bottle and using washer jets than a 4 barrel holley on the 202 1 Quote Link to comment Share on other sites More sharing options...
chris r Posted May 8, 2020 Author Share Posted May 8, 2020 1 hour ago, Raizer said: "Stage 3" doesn't give much of a description, how many fractions of a race cam is is?? 3/10ths race cam. M9 2 Quote Link to comment Share on other sites More sharing options...
chris r Posted May 8, 2020 Author Share Posted May 8, 2020 Cam specs here for those that know what those numbers mean Quote Link to comment Share on other sites More sharing options...
kyteler Posted May 9, 2020 Share Posted May 9, 2020 21 hours ago, chris r said: Been keeping half a eye out for a manifold. And I'd be better off with fuel in the washer bottle and using washer jets than a 4 barrel holley on the 202 When I had my 202 there was always the "put a 350 on it" crowd but that was just all of the gas all of the time. The actual trick was apparently a 465 with vacuum secondaries. That said, I put a 350 on with a Cain SS because I'm an idiot and one popped up for cheapsie doodles. 2 Quote Link to comment Share on other sites More sharing options...
chris r Posted May 9, 2020 Author Share Posted May 9, 2020 Just now, kyteler said: When I had my 202 there was always the "put a 350 on it" crowd but that was just all of the gas all of the time. The actual trick was apparently a 465 with vacuum secondaries. That said, I put a 350 on with a Cain SS because I'm an idiot and one popped up for cheapsie doodles. I've heard/read so many people saying throw a 350 on it m9 it'll go hard azz. Also everyone says they absoutly drink the gas with a treefiddy. Eeh if it's cheap then who gives a shit. I've got a few quadrajets here if I find a cheap 4 barrel manifold but what I'll probably end up doing is getting a plate welded on the stock shit manifold and biltong a weber onto it Ideally I'd like to be able to use the og air filter housing so it looks 'stock' 3 Quote Link to comment Share on other sites More sharing options...
CUL8R Posted May 10, 2020 Share Posted May 10, 2020 https://www.facebook.com/marketplace/item/2302900563345203/ 1 Quote Link to comment Share on other sites More sharing options...
chris r Posted May 10, 2020 Author Share Posted May 10, 2020 @CUL8R I saw that in my trawling and thought about it. will flick them a message and see how much they want They want 1200 for that and a set of rusty extractors so I'll pass on that Quote Link to comment Share on other sites More sharing options...
CUL8R Posted May 11, 2020 Share Posted May 11, 2020 There was another very similar I had seen, but cant seem to find it. My brother might have a CAIN manifold and ? carb if he has his old motor still? Quote Link to comment Share on other sites More sharing options...
chris r Posted May 11, 2020 Author Share Posted May 11, 2020 3 hours ago, CUL8R said: There was another very similar I had seen, but cant seem to find it. My brother might have a CAIN manifold and ? carb if he has his old motor still? I saw one that had checker-plate on the inside of the manifold which was similar to that one on facebook yeah I'd be interested in that one for sure! I found a DINGO manifold in aus for cheap but the guy wasn't interested in shipping it I've found a weber 32/36 thats been jetted for a 202 for a reasonable price so no drama if there isn't a carb with the manifold Quote Link to comment Share on other sites More sharing options...
SOHC Posted May 20, 2020 Share Posted May 20, 2020 Was that you I was waving at on Tittarangi road? Today? Quote Link to comment Share on other sites More sharing options...
chris r Posted May 20, 2020 Author Share Posted May 20, 2020 2 hours ago, SOHC said: Was that you I was waving at on Tittarangi road? Today? Yes it was. I did wave back but probably too late to catch you 2 Quote Link to comment Share on other sites More sharing options...
vk327 Posted May 20, 2020 Share Posted May 20, 2020 if you havent got a carb yet check out palmside.co.nz, they sell the 32/36 weber new for a reasonable price new, also if you have the ability to weld a water heating tube to the bottom of the manifold for anti icing, done that to the redline manifold i had on my hq 202 made a huge difference to not having cold fuel pool in the manifold, was running a new 32/36dgv from weber specs, that and the vk electronic dizzy worked well on the old 202 Quote Link to comment Share on other sites More sharing options...
vk327 Posted May 20, 2020 Share Posted May 20, 2020 Pics of the water heating and 32/36 on a redrilled hollley adapter 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.