crooked Posted August 9, 2015 Share Posted August 9, 2015 As the title states, does anyone know a way to convert a gx60 from 4x114.3 - 5x114.3... Quote Link to comment Share on other sites More sharing options...
Sammy Posted August 9, 2015 Share Posted August 9, 2015 Id have to look at my notes but im pretty sure MS65 front hubs work. Bloody hard to find though Quote Link to comment Share on other sites More sharing options...
Shandangles Posted August 9, 2015 Share Posted August 9, 2015 if they are they are the same hub as X70, you can use R31 Nissan hubs as they use the same bearings, you have to re drill the hubs but its possible to due to a differrent design than toyota hubs. From memory the Nissan 4 pot calipers bolt on too. Quote Link to comment Share on other sites More sharing options...
thegreatestben Posted August 9, 2015 Share Posted August 9, 2015 Never seen it done but if you looked at X8 stuff they also are able to bolt on the nissan 4 pots with BA falcon rotors and a simple hub spacer. Quote Link to comment Share on other sites More sharing options...
crooked Posted August 12, 2015 Author Share Posted August 12, 2015 Thanks guys I'll have a look into that Quote Link to comment Share on other sites More sharing options...
uza63 Posted August 16, 2015 Share Posted August 16, 2015 Nissan 4pots bolt up to x60 fronts with a spacer, still 4 stud tho.. extend 1 stud and adapter? Quote Link to comment Share on other sites More sharing options...
Roman Posted August 16, 2015 Share Posted August 16, 2015 Go to toyodiy.com and look up the wheel bearing part numbers for you car. Then cross search that against other Toyota models. I did this to find some 4x114 Townace hubs that worked perfectly for what I was after. However I'm pretty sure there are 5x114 vans that had the same wheel bearings etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.