M.H. Posted June 20, 2015 Share Posted June 20, 2015 I need to have a pair of half shafts shortened by about 50mm each. Who can do this and approximately how much does it cost? Quote Link to comment Share on other sites More sharing options...
sheepers Posted June 20, 2015 Share Posted June 20, 2015 What difference in diameter is there between the spline and the rest of the shaft. Assuming it's a spline shaft. Some info on what the shafts are out off or a picture would help you get an answer to your question Quote Link to comment Share on other sites More sharing options...
M.H. Posted June 21, 2015 Author Share Posted June 21, 2015 The shafts are the same diameter along the length. Im wanting to fit an r200 diff in my mercedes, the merc diff is approximately 225mm wide and the r200 is 315mm Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted June 21, 2015 Share Posted June 21, 2015 NIssan half shafts are able to be shortened. But you'll be stuck using which ever shafts have the larger diameter spline. Lots of solid axle diffs have splines which are hobbed on. Which doesn't lend itself to being resplined easily. Quote Link to comment Share on other sites More sharing options...
_sedan_(23230030334)(1).thumb.jpg.34d765361d66c78db614bae6ea2c156a.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.